U-Boot 2018.01-1 (Feb 13 2018 - 02:19:55 +0000) Arch Linux ARM

CPU:   Exynos4412 @ 1 GHz
Model: Odroid based on Exynos4412
Board: Odroid based on Exynos4412
Type:  u3
DRAM:  2 GiB
LDO20@VDDQ_EMMC_1.8V: set 1800000 uV; enabling
LDO22@VDDQ_EMMC_2.8V: set 2800000 uV; enabling
LDO21@TFLASH_2.8V: set 2800000 uV; enabling
MMC:   SAMSUNG SDHCI: 1, EXYNOS DWMMC: 0
Card did not respond to voltage select!
mmc_init: -95, time 10
*** Warning - No block device, using default environment

Net:   No ethernet found.
Hit any key to stop autoboot:  0
Odroid #
Odroid #
Odroid #
Odroid # printenv
arch=arm
autoboot=if test -e mmc 0 boot.scr; then; run boot_script; elif test -e mmc 0 Image.itb; then; run boot_fit;elif test -e mmc 0 zImage; then; run boot_zimg;elif test -e mmc 0 uImage; then; run boot_uimg;fi;
baudrate=115200
board=odroid
board_name=odroid
boardname=odroidu3
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_efi_binary=if fdt addr ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr ${fdtcontroladdr};fi;load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootarm.efi; if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}extlinux/extlinux.conf
boot_fit=setenv kerneladdr 0x42000000;setenv kernelname Image.itb;run loadkernel;run kernel_args;bootm ${kerneladdr}#${boardname}
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_script=run loadbootscript;source ${scriptaddr}
boot_script_dhcp=boot.scr.uimg
x
boot_scripts=boot.scr.uimg boot.scr
boot_targets=mmc1 mmc0
boot_uimg=setenv kerneladdr 0x40007FC0;setenv kernelname uImage;run check_dtb;run check_ramdisk;run loadkernel;run kernel_args;bootm ${kerneladdr} ${initrd_addr} ${fdt_addr};
boot_zimg=setenv kerneladdr 0x40007FC0;setenv kernelname zImage;run check_dtb;run check_ramdisk;run loadkernel;run kernel_args;bootz ${kerneladdr} ${initrd_addr} ${fdt_addr};
bootargs=Please use defined boot
bootcmd=run distro_bootcmd
bootcmd_mmc0=setenv devnum 0; run mmc_boot
bootcmd_mmc1=setenv devnum 1; run mmc_boot
bootdelay=2
bootm_size=0x10000000
check_dtb=if run loaddtb; then setenv fdt_addr ${fdtaddr};else setenv fdt_addr;fi;
check_ramdisk=if run loadinitrd; then setenv initrd_addr ${initrdaddr};else setenv initrd_addr -;fi;
console=ttySAC1,115200n8
consoleoff=set console console=ram; save; reset
consoleon=set console console=ttySAC1,115200n8; save; reset
cpu=armv7
dfu_alt_info=Please reset the board
dfu_alt_system=uImage fat 0 1;zImage fat 0 1;Image.itb fat 0 1;uInitrd fat 0 1;exynos4412-odroidu3.dtb fat 0 1;exynos4412-odroidx2.dtb fat 0 1;boot part 0 1;platform part 0 2
distro_bootcmd=for target in ${boot_targets}; do run bootcmd_${target}; done
efi_dtb_prefixes=/ /dtb/ /dtb/current/
fdt_addr_r=0x43000000
fdtaddr=40800000
x
fdtcontroladdr=bae3def0
fdtfile=exynos4412-odroidu3.dtb
initrdaddr=42000000
initrdname=uInitrd
kernel_addr_r=0x42000000
kernel_args=setenv bootargs root=/dev/mmcblk${mmcrootdev}p${mmcrootpart} rootwait ${console} ${opts}
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
loadbootscript=load mmc ${mmcbootdev}:${mmcbootpart} ${scriptaddr} boot.scr
loaddtb=load mmc ${mmcbootdev}:${mmcbootpart} ${fdtaddr} ${fdtfile}
loadinitrd=load mmc ${mmcbootdev}:${mmcbootpart} ${initrdaddr} ${initrdname}
loadkernel=load mmc ${mmcbootdev}:${mmcbootpart} ${kerneladdr} ${kernelname}
mmc_boot=if mmc dev ${devnum}; then setenv devtype mmc; run scan_dev_for_boot_part; fi
mmcbootdev=0
mmcbootpart=1
mmcrootdev=0
mmcrootpart=2
pxefile_addr_r=0x51000000
ramdisk_addr_r=0x43300000
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; if test -z "${fdtfile}" -a -n "${soc}"; then setenv efi_fdtfile ${soc}-${board}${boardver}.dtb; fi; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootarm.efi; then echo Found EFI removable media binary efi/boot/bootarm.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}extlinux/extlinux.conf; then echo Found ${prefix}extlinux/extlinux.conf; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x50000000
soc=exynos
soc_id=4412
soc_rev=2.0
usb_boot=usb start; if usb dev ${devnum}; then setenv devtype usb; run scan_dev_for_boot_part; fi
vendor=samsung

Environment size: 4898/8188 bytes
Odroid #