The basic blocks of the A23 are similar to the A31 (sun6i). Re-use sun6i code for initial clock, gpio, and uart setup.
Signed-off-by: Chen-Yu Tsai wens@csie.org --- arch/arm/Kconfig | 3 +++ arch/arm/cpu/armv7/sunxi/Makefile | 2 ++ arch/arm/cpu/armv7/sunxi/board.c | 3 ++- arch/arm/cpu/armv7/sunxi/cpu_info.c | 2 ++ arch/arm/include/asm/arch-sunxi/clock.h | 2 +- board/sunxi/Kconfig | 9 ++++++++- include/configs/sun8i.h | 23 +++++++++++++++++++++++ 7 files changed, 41 insertions(+), 3 deletions(-) create mode 100644 include/configs/sun8i.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e3e7e78..cb691b2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -450,6 +450,9 @@ config TARGET_SUN6I config TARGET_SUN7I bool "Support sun7i"
+config TARGET_SUN8I + bool "Support sun8i" + config TARGET_SNOWBALL bool "Support snowball"
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 2a42dca..24f1dae 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -12,10 +12,12 @@ obj-y += board.o obj-y += clock.o obj-y += pinmux.o obj-$(CONFIG_SUN6I) += prcm.o +obj-$(CONFIG_SUN8I) += prcm.o obj-$(CONFIG_SUN4I) += clock_sun4i.o obj-$(CONFIG_SUN5I) += clock_sun4i.o obj-$(CONFIG_SUN6I) += clock_sun6i.o obj-$(CONFIG_SUN7I) += clock_sun4i.o +obj-$(CONFIG_SUN8I) += clock_sun6i.o
ifndef CONFIG_SPL_BUILD obj-y += cpu_info.o diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 29d45b6..61c1ba9 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -100,7 +100,8 @@ void reset_cpu(ulong addr) /* do some early init */ void s_init(void) { -#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I) +#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || \ + defined CONFIG_SUN6I || defined CONFIG_SUN8I) /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */ asm volatile( "mrc p15, 0, r0, c1, c0, 1\n" diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c index 40c4e13..4f2a09c 100644 --- a/arch/arm/cpu/armv7/sunxi/cpu_info.c +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c @@ -27,6 +27,8 @@ int print_cpuinfo(void) puts("CPU: Allwinner A31 (SUN6I)\n"); #elif defined CONFIG_SUN7I puts("CPU: Allwinner A20 (SUN7I)\n"); +#elif defined CONFIG_SUN8I + puts("CPU: Allwinner A23 (SUN8I)\n"); #else #warning Please update cpu_info.c with correct CPU information puts("CPU: SUNXI Family\n"); diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index 8f5d860..012c2af 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -15,7 +15,7 @@ #define CLK_GATE_CLOSE 0x0
/* clock control module regs definition */ -#ifdef CONFIG_SUN6I +#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) #include <asm/arch/clock_sun6i.h> #else #include <asm/arch/clock_sun4i.h> diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 05defac..16f6db4 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -27,7 +27,14 @@ config SYS_CONFIG_NAME
endif
-if TARGET_SUN4I || TARGET_SUN5I || TARGET_SUN6I || TARGET_SUN7I +if TARGET_SUN8I + +config SYS_CONFIG_NAME + default "sun8i" + +endif + +if TARGET_SUN4I || TARGET_SUN5I || TARGET_SUN6I || TARGET_SUN7I || TARGET_SUN8I
config SYS_CPU default "armv7" diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h new file mode 100644 index 0000000..1c1a7cd --- /dev/null +++ b/include/configs/sun8i.h @@ -0,0 +1,23 @@ +/* + * (C) Copyright 2014 Chen-Yu Tsai wens@csie.org + * + * Configuration settings for the Allwinner A23 (sun8i) CPU + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * A23 specific configuration + */ +#define CONFIG_SUN8I /* sun8i SoC generation */ +#define CONFIG_SYS_PROMPT "sun8i# " + +/* + * Include common sunxi configuration where most the settings are + */ +#include <configs/sunxi-common.h> + +#endif /* __CONFIG_H */