ODROID-N2 is a single board computer manufactured by Hardkernel Co. Ltd with the following specifications:
- Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC - 4GB DDR4 SDRAM - Gigabit Ethernet - HDMI 2.1 4K/60Hz display - 40-pin GPIO header - 4 x USB 3.0 Host, 1 x USB OTG - eMMC, microSD - Infrared receiver
The board directory is W400, the name of the Amlogic Reference Design of Amlogic G12B with Gigabit boards, which will be used for similar boards.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- board/amlogic/w400/MAINTAINERS | 6 ++ board/amlogic/w400/Makefile | 6 ++ board/amlogic/w400/README.odroid-n2 | 130 ++++++++++++++++++++++++++++ board/amlogic/w400/README.w400 | 130 ++++++++++++++++++++++++++++ board/amlogic/w400/w400.c | 18 ++++ configs/odroid-n2_defconfig | 56 ++++++++++++ 6 files changed, 346 insertions(+) create mode 100644 board/amlogic/w400/MAINTAINERS create mode 100644 board/amlogic/w400/Makefile create mode 100644 board/amlogic/w400/README.odroid-n2 create mode 100644 board/amlogic/w400/README.w400 create mode 100644 board/amlogic/w400/w400.c create mode 100644 configs/odroid-n2_defconfig
diff --git a/board/amlogic/w400/MAINTAINERS b/board/amlogic/w400/MAINTAINERS new file mode 100644 index 0000000000..6e68fa73f7 --- /dev/null +++ b/board/amlogic/w400/MAINTAINERS @@ -0,0 +1,6 @@ +W400 +M: Neil Armstrong narmstrong@baylibre.com +S: Maintained +L: u-boot-amlogic@groups.io +F: board/amlogic/w400/ +F: configs/odroid-n2_defconfig diff --git a/board/amlogic/w400/Makefile b/board/amlogic/w400/Makefile new file mode 100644 index 0000000000..fac4a73afa --- /dev/null +++ b/board/amlogic/w400/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2019 BayLibre, SAS +# Author: Neil Armstrong narmstrong@baylibre.com + +obj-y := w400.o diff --git a/board/amlogic/w400/README.odroid-n2 b/board/amlogic/w400/README.odroid-n2 new file mode 100644 index 0000000000..a8f2c3d7da --- /dev/null +++ b/board/amlogic/w400/README.odroid-n2 @@ -0,0 +1,130 @@ +U-Boot for ODROID-N2 +==================== + +ODROID-N2 is a single board computer manufactured by Hardkernel +Co. Ltd with the following specifications: + + - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC + - 4GB DDR4 SDRAM + - Gigabit Ethernet + - HDMI 2.1 4K/60Hz display + - 40-pin GPIO header + - 4 x USB 3.0 Host, 1 x USB OTG + - eMMC, microSD + - Infrared receiver + +Schematics are available on the manufacturer website. + +Currently the u-boot port supports the following devices: + - serial + - eMMC, microSD + - Ethernet + - I2C + - Regulators + - Reset controller + - Clock controller + - ADC + +u-boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make odroid-n2_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + + > DIR=odroid-n2 + > git clone --depth 1 \ + https://github.com/hardkernel/u-boot.git -b odroidn2-v2015.01 \ + $DIR + + > cd odroid-n2 + > make odroidn2_defconfig + > make + > export UBOOTDIR=$PWD + + Go back to mainline U-Boot source tree then : + > mkdir fip + + > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/b... -O fip/blx_fix.sh + > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + > cp $UBOOTDIR/build/board/hardkernel/odroidn2/firmware/acs.bin fip/ + > cp $UBOOTDIR/fip/g12b/bl2.bin fip/ + > cp $UBOOTDIR/fip/g12b/bl30.bin fip/ + > cp $UBOOTDIR/fip/g12b/bl31.img fip/ + > cp $UBOOTDIR/fip/g12b/ddr3_1d.fw fip/ + > cp $UBOOTDIR/fip/g12b/ddr4_1d.fw fip/ + > cp $UBOOTDIR/fip/g12b/ddr4_2d.fw fip/ + > cp $UBOOTDIR/fip/g12b/diag_lpddr4.fw fip/ + > cp $UBOOTDIR/fip/g12b/lpddr4_1d.fw fip/ + > cp $UBOOTDIR/fip/g12b/lpddr4_2d.fw fip/ + > cp $UBOOTDIR/fip/g12b/piei.fw fip/ + > cp $UBOOTDIR/fip/g12b/aml_ddr.fw fip/ + > cp u-boot.bin fip/bl33.bin + + > sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + > sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 --compress lz4 + > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + > $UBOOTDIR/fip/g12b/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --level v3 + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/w400/README.w400 b/board/amlogic/w400/README.w400 new file mode 100644 index 0000000000..25b786d817 --- /dev/null +++ b/board/amlogic/w400/README.w400 @@ -0,0 +1,130 @@ +U-Boot for Amlogic W400 +======================= + +U200 is a reference board manufactured by Amlogic with the following +specifications: + + - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC + - 2GB DDR4 SDRAM + - 10/100 Ethernet (Internal PHY) + - 1 x USB 3.0 Host + - eMMC + - SDcard + - Infrared receiver + - SDIO WiFi Module + - MIPI DSI Connector + - Audio HAT Connector + - PCI-E M.2 Connector + +Schematics are available from Amlogic on demand. + +Currently the u-boot port supports the following devices: + - serial + - Ethernet + - Regulators + - Clock controller + +u-boot compilation +================== + + > export ARCH=arm + > export CROSS_COMPILE=aarch64-none-elf- + > make w400_defconfig + > make + +Image creation +============== + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... + > wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... + > tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + > tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + > export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + > git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot + > cd amlogic-u-boot + > make g12b_w400_v1_defconfig + > make + > export UBOOTDIR=$PWD + +Download the latest Amlogic Buildroot package, and extract it : + > wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openli... + > tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader + > export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706 + > export FIPDIR=$BRDIR/bootloader/uboot-repo/fip + +Go back to mainline U-Boot source tree then : + > mkdir fip + + > wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/b... -O fip/blx_fix.sh + > cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + > cp $UBOOTDIR/build/board/amlogic/g12b_w400_v1/firmware/acs.bin fip/ + > cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12b/bl2.bin fip/ + > cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12b/bl30.bin fip/ + > cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12b/bl31.img fip/ + > cp $FIPDIR/g12b/ddr3_1d.fw fip/ + > cp $FIPDIR/g12b/ddr4_1d.fw fip/ + > cp $FIPDIR/g12b/ddr4_2d.fw fip/ + > cp $FIPDIR/g12b/diag_lpddr4.fw fip/ + > cp $FIPDIR/g12b/lpddr4_1d.fw fip/ + > cp $FIPDIR/g12b/lpddr4_2d.fw fip/ + > cp $FIPDIR/g12b/piei.fw fip/ + > cp $FIPDIR/g12b/aml_ddr.fw fip/ + > cp u-boot.bin fip/bl33.bin + + > sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + > sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + > $FIPDIR/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + > $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 + > $FIPDIR/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + > $FIPDIR/g12b/aml_encrypt_g12b --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --level v3 + +and then write the image to SD with: + + > DEV=/dev/your_sd_device + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + > dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 diff --git a/board/amlogic/w400/w400.c b/board/amlogic/w400/w400.c new file mode 100644 index 0000000000..4737865367 --- /dev/null +++ b/board/amlogic/w400/w400.c @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 BayLibre, SAS + * Author: Neil Armstrong narmstrong@baylibre.com + */ + +#include <common.h> +#include <dm.h> +#include <environment.h> +#include <asm/io.h> +#include <asm/arch/eth.h> + +int misc_init_r(void) +{ + meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0); + + return 0; +} diff --git a/configs/odroid-n2_defconfig b/configs/odroid-n2_defconfig new file mode 100644 index 0000000000..38d1549375 --- /dev/null +++ b/configs/odroid-n2_defconfig @@ -0,0 +1,56 @@ +CONFIG_ARM=y +CONFIG_ARCH_MESON=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_MESON_G12A=y +CONFIG_SYS_BOARD="w400" +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEBUG_UART_BASE=0xff803000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" odroid-n2" +CONFIG_DEBUG_UART=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-odroid-n2" +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_GPIO=y +CONFIG_DM_MMC=y +CONFIG_MMC_MESON_GX=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_G12A=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_MESON=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_USB=y +CONFIG_USB_HOST=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_PHY=y +CONFIG_MESON_G12A_USB_PHY=y +CONFIG_DM_USB=y +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_MESON_G12A=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada