1.0 rev is the latest rev. Describe information in eeprom.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
arch/arm/dts/Makefile | 1 + arch/arm/dts/zynqmp-zcu102-rev1.0.dts | 37 +++++++++++++ arch/arm/dts/zynqmp-zcu102-revA.dts | 2 +- configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 75 +++++++++++++++++++++++++++ 4 files changed, 114 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/zynqmp-zcu102-rev1.0.dts create mode 100644 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ab5115f255ec..6c73bc943672 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -145,6 +145,7 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += \ zynqmp-ep108.dtb \ zynqmp-zcu102-revA.dtb \ zynqmp-zcu102-revB.dtb \ + zynqmp-zcu102-rev1.0.dtb \ zynqmp-zc1751-xm015-dc1.dtb \ zynqmp-zc1751-xm016-dc2.dtb \ zynqmp-zc1751-xm018-dc4.dtb \ diff --git a/arch/arm/dts/zynqmp-zcu102-rev1.0.dts b/arch/arm/dts/zynqmp-zcu102-rev1.0.dts new file mode 100644 index 000000000000..323a674e3a62 --- /dev/null +++ b/arch/arm/dts/zynqmp-zcu102-rev1.0.dts @@ -0,0 +1,37 @@ +/* + * dts file for Xilinx ZynqMP ZCU102 Rev1.0 + * + * (C) Copyright 2016, Xilinx, Inc. + * + * Michal Simek michal.simek@xilinx.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "zynqmp-zcu102-revB.dts" + +/ { + model = "ZynqMP ZCU102 Rev1.0"; + compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; +}; + +&eeprom { + #address-cells = <1>; + #size-cells = <1>; + + board_sn: board_sn@0 { + reg = <0x0 0x14>; + }; + + eth_mac: eth_mac@20 { + reg = <0x20 0x6>; + }; + + board_name: board_name@d0 { + reg = <0xd0 0x6>; + }; + + board_revision: board_revision@e0 { + reg = <0xe0 0x3>; + }; +}; diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index eb361b00362a..9e5a13d5bce8 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -437,7 +437,7 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o * 512B - 768B address 0x56 * 768B - 1024B address 0x57 */ - eeprom@54 { /* u23 */ + eeprom: eeprom@54 { /* u23 */ compatible = "at,24c08"; reg = <0x54>; }; diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig new file mode 100644 index 000000000000..69613717deac --- /dev/null +++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig @@ -0,0 +1,75 @@ +CONFIG_ARM=y +CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_zcu102" +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP ZCU102 rev1.0" +CONFIG_ZYNQMP_USB=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-zcu102-rev1.0" +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_PROMPT="ZynqMP> " +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_AES=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_EMBED=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_MISC=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_DM_ETH=y +CONFIG_ZYNQ_GEM=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y