[PATCH v1 12/15] mips: octeon: Add Octeon III NIC23 board support

7 Apr 2021

This patch adds the basic support for the PCIe target board equipped
with the Octeon III CN2350 SoC.
Signed-off-by: Stefan Roese sr@denx.de
---
arch/mips/dts/Makefile                 |   1 +
 arch/mips/dts/mrvl,octeon-nic23.dts    | 162 +++++++++++++++
 arch/mips/mach-octeon/Kconfig          |   7 +
 board/Marvell/octeon_nic23/Kconfig     |  19 ++
 board/Marvell/octeon_nic23/MAINTAINERS |   7 +
 board/Marvell/octeon_nic23/Makefile    |   8 +
 board/Marvell/octeon_nic23/board.c     | 106 ++++++++++
 board/Marvell/octeon_nic23/board_ddr.h | 269 +++++++++++++++++++++++++
 configs/octeon_nic23_defconfig         |  70 +++++++
 include/configs/octeon_nic23.h         |  21 ++
 10 files changed, 670 insertions(+)
 create mode 100644 arch/mips/dts/mrvl,octeon-nic23.dts
 create mode 100644 board/Marvell/octeon_nic23/Kconfig
 create mode 100644 board/Marvell/octeon_nic23/MAINTAINERS
 create mode 100644 board/Marvell/octeon_nic23/Makefile
 create mode 100644 board/Marvell/octeon_nic23/board.c
 create mode 100644 board/Marvell/octeon_nic23/board_ddr.h
 create mode 100644 configs/octeon_nic23_defconfig
 create mode 100644 include/configs/octeon_nic23.h

diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index 7c429231340c..215283cfa05b 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -20,6 +20,7 @@ dtb-$(CONFIG_BOARD_MT7628_RFB) += mediatek,mt7628-rfb.dtb
 dtb-$(CONFIG_BOARD_GARDENA_SMART_GATEWAY_MT7688) += gardena-smart-gateway-mt7688.dtb
 dtb-$(CONFIG_BOARD_LINKIT_SMART_7688) += linkit-smart-7688.dtb
 dtb-$(CONFIG_TARGET_OCTEON_EBB7304) += mrvl,octeon-ebb7304.dtb
+dtb-$(CONFIG_TARGET_OCTEON_NIC23) += mrvl,octeon-nic23.dtb
 dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb
 dtb-$(CONFIG_BOARD_NETGEAR_DGND3700V2) += netgear,dgnd3700v2.dtb
 dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f@st1704.dtb
diff --git a/arch/mips/dts/mrvl,octeon-nic23.dts b/arch/mips/dts/mrvl,octeon-nic23.dts
new file mode 100644
index 000000000000..72ef56d834e4
--- /dev/null
+++ b/arch/mips/dts/mrvl,octeon-nic23.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Marvell / Cavium Inc. NIC23
+ */
+
+/dts-v1/;
+
+#include "mrvl,cn73xx.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "cavium,nic23";
+	compatible = "cavium,nic23";
+
+	aliases {
+		mmc0 = &mmc0;
+		serial0 = &uart0;
+		spi0 = &spi;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Power on GPIO 8, active high */
+		reg_mmc_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "mmc-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+};
+
+&bootbus {
+	/*
+	 * bootbus CS0 for CFI flash is remapped (0x1fc0.0000 -> 1f40.0000)
+	 * as the initial size is too small for the 8MiB flash device
+	 */
+	ranges = <0 0  0       0x1f400000  0xc00000>,
+		 <1 0  0x10000 0x10000000  0>,
+		 <2 0  0x10000 0x20000000  0>,
+		 <3 0  0x10000 0x30000000  0>,
+		 <4 0  0       0x1d020000  0x10000>,
+		 <5 0  0x10000 0x50000000  0>,
+		 <6 0  0x10000 0x60000000  0>,
+		 <7 0  0x10000 0x70000000  0>;
+
+	cavium,cs-config@0 {
+		compatible = "cavium,octeon-3860-bootbus-config";
+		cavium,cs-index = <0>;
+		cavium,t-adr  = <10>;
+		cavium,t-ce   = <50>;
+		cavium,t-oe   = <50>;
+		cavium,t-we   = <35>;
+		cavium,t-rd-hld = <25>;
+		cavium,t-wr-hld = <35>;
+		cavium,t-pause  = <0>;
+		cavium,t-wait   = <50>;
+		cavium,t-page   = <30>;
+		cavium,t-rd-dly = <0>;
+		cavium,page-mode = <1>;
+		cavium,pages     = <8>;
+		cavium,bus-width = <8>;
+	};
+
+	cavium,cs-config@4 {
+		compatible = "cavium,octeon-3860-bootbus-config";
+		cavium,cs-index = <4>;
+		cavium,t-adr  = <10>;
+		cavium,t-ce   = <10>;
+		cavium,t-oe   = <160>;
+		cavium,t-we   = <100>;
+		cavium,t-rd-hld = <10>;
+		cavium,t-wr-hld = <0>;
+		cavium,t-pause  = <50>;
+		cavium,t-wait   = <50>;
+		cavium,t-page   = <10>;
+		cavium,t-rd-dly = <10>;
+		cavium,pages     = <0>;
+		cavium,bus-width = <8>;
+	};
+
+	flash0: nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x800000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "bootloader";
+			reg = <0 0x340000>;
+			read-only;
+		};
+		partition@300000 {
+			label = "storage";
+			reg = <0x340000 0x4be000>;
+		};
+		partition@7fe000 {
+			label = "environment";
+			reg = <0x7fe000 0x2000>;
+			read-only;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <800000000>;
+};
+
+&i2c0 {
+	u-boot,dm-pre-reloc;	/* Needed early for DDR SPD EEPROM */
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	u-boot,dm-pre-reloc;	/* Needed early for DDR SPD EEPROM */
+	clock-frequency = <100000>;
+};
+
+&mmc {
+	status = "okay";
+
+	mmc0: mmc-slot@0 {
+		compatible = "cavium,octeon-6130-mmc-slot", "mmc-slot";
+		reg = <0>;
+		vqmmc-supply = <&reg_mmc_3v3>;
+		voltage-ranges = <3300 3300>;
+		spi-max-frequency = <52000000>;
+		/* bus width can be 1, 4 or 8 */
+		bus-width = <8>; /* new std property */
+		cavium,bus-max-width = <8>; /* custom property */
+		non-removable;
+	};
+};
+
+&soc0 {
+	pci-console@0 {
+		compatible = "marvell,pci-console";
+		status = "okay";
+	};
+
+	pci-bootcmd@0 {
+		compatible = "marvell,pci-bootcmd";
+		status = "okay";
+	};
+};
+
+&spi {
+	flash@0 {
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
+		spi-max-frequency = <2000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/mips/mach-octeon/Kconfig b/arch/mips/mach-octeon/Kconfig
index d69408cc2753..624039df2536 100644
--- a/arch/mips/mach-octeon/Kconfig
+++ b/arch/mips/mach-octeon/Kconfig
@@ -41,6 +41,12 @@ config TARGET_OCTEON_EBB7304
    help
     Choose this for the Octeon EBB7304 board
+config TARGET_OCTEON_NIC23
+	bool "Marvell Octeon NIC23"
+	select OCTEON_CN73XX
+	help
+	 Choose this for the Octeon NIC23 board
+
 endchoice
config SYS_DCACHE_SIZE
@@ -60,5 +66,6 @@ config SYS_PCI_64BIT
    default y
source "board/Marvell/octeon_ebb7304/Kconfig"
+source "board/Marvell/octeon_nic23/Kconfig"
endmenu
diff --git a/board/Marvell/octeon_nic23/Kconfig b/board/Marvell/octeon_nic23/Kconfig
new file mode 100644
index 000000000000..3c42e8acdadc
--- /dev/null
+++ b/board/Marvell/octeon_nic23/Kconfig
@@ -0,0 +1,19 @@
+if TARGET_OCTEON_NIC23
+
+config SYS_BOARD
+	string
+	default "octeon_nic23"
+
+config SYS_VENDOR
+	string
+	default "Marvell"
+
+config SYS_CONFIG_NAME
+	string
+	default "octeon_nic23"
+
+config DEFAULT_DEVICE_TREE
+	string
+	default "mrvl,octeon-nic23"
+
+endif
diff --git a/board/Marvell/octeon_nic23/MAINTAINERS b/board/Marvell/octeon_nic23/MAINTAINERS
new file mode 100644
index 000000000000..cd5148dcfee9
--- /dev/null
+++ b/board/Marvell/octeon_nic23/MAINTAINERS
@@ -0,0 +1,7 @@
+OCTEON_NIC23 BOARD
+M:	Aaron Williams awilliams@marvell.com
+S:	Maintained
+F:	board/Marvell/octeon_nic23/*
+F:	configs/octeon_nic23_defconfig
+F:	include/configs/octeon_nic23.h
+F:	arch/mips/dts/mrvl,octeon-nic23.dts
diff --git a/board/Marvell/octeon_nic23/Makefile b/board/Marvell/octeon_nic23/Makefile
new file mode 100644
index 000000000000..a79b94ec6f1b
--- /dev/null
+++ b/board/Marvell/octeon_nic23/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2021 Stefan Roese sr@denx.de
+# Copyright (C) 2019-2020 Marvell International Ltd.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= board.o
diff --git a/board/Marvell/octeon_nic23/board.c b/board/Marvell/octeon_nic23/board.c
new file mode 100644
index 000000000000..9f5eb2e2a182
--- /dev/null
+++ b/board/Marvell/octeon_nic23/board.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Stefan Roese sr@denx.de
+ */
+
+#include <dm.h>
+#include <ram.h>
+
+#include <mach/octeon_ddr.h>
+#include <mach/cvmx-qlm.h>
+#include <mach/octeon_qlm.h>
+#include <mach/octeon_fdt.h>
+#include <mach/cvmx-helper.h>
+#include <mach/cvmx-helper-cfg.h>
+#include <mach/cvmx-helper-util.h>
+#include <mach/cvmx-bgxx-defs.h>
+
+#include "board_ddr.h"
+
+#define NIC23_DEF_DRAM_FREQ		800
+
+static u8 octeon_nic23_cfg0_spd_values[512] = {
+	OCTEON_NIC23_CFG0_SPD_VALUES
+};
+
+static struct ddr_conf board_ddr_conf[] = {
+	 OCTEON_NIC23_DDR_CONFIGURATION
+};
+
+struct ddr_conf *octeon_ddr_conf_table_get(int *count, int *def_ddr_freq)
+{
+	*count = ARRAY_SIZE(board_ddr_conf);
+	*def_ddr_freq = NIC23_DEF_DRAM_FREQ;
+
+	return board_ddr_conf;
+}
+
+int board_fix_fdt(void *fdt)
+{
+	u32 range_data[5 * 8];
+	bool rev4;
+	int node;
+	int rc;
+
+	/*
+	 * ToDo:
+	 * Read rev4 info from EEPROM or where the original U-Boot does
+	 * and don't hard-code it here.
+	 */
+	rev4 = true;
+
+	debug("%s() rev4: %s\n", __func__, rev4 ? "true" : "false");
+	/* Patch the PHY configuration based on board revision */
+	rc = octeon_fdt_patch_rename(fdt,
+				     rev4 ? "4,nor-flash" : "4,no-nor-flash",
+				     "cavium,board-trim", false, NULL, NULL);
+	if (!rev4) {
+		/* Modify the ranges for CS 0 */
+		node = fdt_node_offset_by_compatible(fdt, -1,
+						     "cavium,octeon-3860-bootbus");
+		if (node < 0) {
+			printf("%s: Error: cannot find boot bus in device tree!\n",
+			       __func__);
+			return -1;
+		}
+
+		rc = fdtdec_get_int_array(fdt, node, "ranges",
+					  range_data, 5 * 8);
+		if (rc) {
+			printf("%s: Error reading ranges from boot bus FDT\n",
+			       __func__);
+			return -1;
+		}
+		range_data[2] = cpu_to_fdt32(0x10000);
+		range_data[3] = 0;
+		range_data[4] = 0;
+		rc = fdt_setprop(fdt, node, "ranges", range_data,
+				 sizeof(range_data));
+		if (rc) {
+			printf("%s: Error updating boot bus ranges in fdt\n",
+			       __func__);
+		}
+	}
+	return rc;
+}
+
+void board_configure_qlms(void)
+{
+	octeon_configure_qlm(4, 3000, CVMX_QLM_MODE_SATA_2X1, 0, 0, 0, 0);
+	octeon_configure_qlm(5, 103125, CVMX_QLM_MODE_XFI_1X2, 0, 0, 2, 0);
+	/* Apply amplitude tuning to 10G interface */
+	octeon_qlm_tune_v3(0, 4, 3000, -1, -1, 7, -1);
+	octeon_qlm_tune_v3(0, 5, 103125, 0x19, 0x0, -1, -1);
+	octeon_qlm_set_channel_v3(0, 5, 0);
+	octeon_qlm_dfe_disable(0, 5, -1, 103125, CVMX_QLM_MODE_XFI_1X2);
+	debug("QLM 4 reference clock: %d\n"
+	      "DLM 5 reference clock: %d\n",
+	      cvmx_qlm_measure_clock(4), cvmx_qlm_measure_clock(5));
+}
+
+int board_late_init(void)
+{
+	board_configure_qlms();
+
+	return 0;
+}
diff --git a/board/Marvell/octeon_nic23/board_ddr.h b/board/Marvell/octeon_nic23/board_ddr.h
new file mode 100644
index 000000000000..eac877faf853
--- /dev/null
+++ b/board/Marvell/octeon_nic23/board_ddr.h
@@ -0,0 +1,269 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ */
+
+#ifndef __BOARD_DDR_H__
+#define __BOARD_DDR_H__
+
+#define OCTEON_NIC23_DRAM_SOCKET_CONFIGURATION0			\
+	{ {0x0, 0x0}, {octeon_nic23_cfg0_spd_values, NULL} }
+
+#define NIC23_MTA8ATF51264AZ2G3_SPD_VALUES			\
+	0x23, 0x10, 0x0c, 0x02, 0x84, 0x19, 0x00, 0x08,		\
+	0x00, 0x00, 0x00, 0x03, 0x01, 0x0b, 0x80, 0x00,		\
+	0x00, 0x00, 0x08, 0x0c, 0xf4, 0x1b, 0x00, 0x00,		\
+	0x6c, 0x6c, 0x6c, 0x11, 0x08, 0x74, 0x20, 0x08,		\
+	0x00, 0x05, 0x70, 0x03, 0x00, 0xa8, 0x1e, 0x2b,		\
+	0x2b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x0c, 0x2c, 0x15, 0x35,		\
+	0x15, 0x35, 0x0b, 0x2c, 0x15, 0x35, 0x0b, 0x35,		\
+	0x0b, 0x2c, 0x0b, 0x35, 0x15, 0x36, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0xec, 0xb5, 0xce,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0xc2, 0x30, 0x0e,		\
+	0x11, 0x11, 0x04, 0x01, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x2e,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x80, 0x2c, 0x0f, 0x14, 0x50, 0x0e, 0x08, 0x18,		\
+	0xc8, 0x31, 0x38, 0x41, 0x53, 0x46, 0x31, 0x47,		\
+	0x37, 0x32, 0x41, 0x5a, 0x2d, 0x32, 0x47, 0x31,		\
+	0x41, 0x31, 0x20, 0x20, 0x20, 0x31, 0x80, 0x2c,		\
+	0x41, 0x44, 0x50, 0x41, 0x45, 0x4e, 0x43, 0x39,		\
+	0x30, 0x30, 0x32, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,		\
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+
+#define OCTEON_NIC23_CFG0_SPD_VALUES	NIC23_MTA8ATF51264AZ2G3_SPD_VALUES
+
+#define OCTEON_NIC23_BOARD_EEPROM_TWSI_ADDR	0x56
+
+#define OCTEON_NIC23_MODEREG_PARAMS1_1RANK_1SLOT		\
+{								\
+		.cn78xx = {					\
+			.pasr_00	= 0,			\
+			.asr_00		= 0,			\
+			.srt_00		= 0,			\
+			.rtt_wr_00	= ddr4_rttwr_80ohm & 3,	\
+			.rtt_wr_00_ext	= (ddr4_rttwr_80ohm >> 2) & 1, \
+			.dic_00		= ddr4_dic_34ohm,	\
+			.rtt_nom_00	= 0,                    \
+			.pasr_01	= 0,			\
+			.asr_01		= 0,			\
+			.srt_01		= 0,			\
+			.rtt_wr_01	= 0,			\
+			.dic_01		= ddr4_dic_34ohm,	\
+			.rtt_nom_01	= 0,			\
+			.pasr_10	= 0,			\
+			.asr_10		= 0,			\
+			.srt_10		= 0,			\
+			.rtt_wr_10	= 0,			\
+			.dic_10		= ddr4_dic_34ohm,	\
+			.rtt_nom_10	= 0,			\
+			.pasr_11	= 0,			\
+			.asr_11		= 0,			\
+			.srt_11		= 0,			\
+			.rtt_wr_11	= 0,			\
+			.dic_11		= ddr4_dic_34ohm,	\
+			.rtt_nom_11	= 0,			\
+		}						\
+	}
+
+#define OCTEON_NIC23_MODEREG_PARAMS1_1RANK_2SLOT		\
+{								\
+		.cn78xx = {					\
+			.pasr_00	= 0,			\
+			.asr_00		= 0,			\
+			.srt_00		= 0,			\
+			.rtt_wr_00	= ddr4_rttwr_80ohm & 3,	\
+			.rtt_wr_00_ext	= (ddr4_rttwr_80ohm >> 2) & 1, \
+			.dic_00		= ddr4_dic_34ohm,	\
+			.rtt_nom_00	= 0,			\
+			.pasr_01	= 0,			\
+			.asr_01		= 0,			\
+			.srt_01		= 0,			\
+			.rtt_wr_01	= 0,			\
+			.dic_01		= ddr4_dic_34ohm,	\
+			.rtt_nom_01	= 0,			\
+			.pasr_10	= 0,			\
+			.asr_10		= 0,			\
+			.srt_10		= 0,                    \
+			.rtt_wr_10	= ddr4_rttwr_80ohm & 3,	\
+			.rtt_wr_10_ext	= (ddr4_rttwr_80ohm >> 2) & 1, \
+			.dic_10		= ddr4_dic_34ohm,	\
+			.rtt_nom_10	= 0,			\
+			.pasr_11	= 0,			\
+			.asr_11		= 0,			\
+			.srt_11		= 0,			\
+			.rtt_wr_11	= 0,			\
+			.dic_11		= ddr4_dic_34ohm,	\
+			.rtt_nom_11	= 0			\
+		}                                               \
+}
+
+#define OCTEON_NIC23_MODEREG_PARAMS2_1RANK_1SLOT	\
+{							\
+	.cn78xx = {					\
+		.rtt_park_00    = ddr4_rttpark_60ohm,	\
+		.vref_value_00  = 0x22,			\
+		.vref_range_00  = 0,			\
+		.rtt_park_01    = 0,			\
+		.vref_value_01  = 0,			\
+		.vref_range_01  = 0,			\
+		.rtt_park_10    = 0,			\
+		.vref_value_10  = 0,			\
+		.vref_range_10  = 0,			\
+		.rtt_park_11    = 0,			\
+		.vref_value_11  = 0,			\
+		.vref_range_11  = 0			\
+	}						\
+}
+
+#define  OCTEON_NIC23_MODEREG_PARAMS2_1RANK_2SLOT	\
+{							\
+	.cn78xx = {					\
+		.rtt_park_00    = ddr4_rttpark_48ohm,	\
+		.vref_value_00  = 0x1f,			\
+		.vref_range_00  = 0,			\
+		.rtt_park_01    = 0,			\
+		.vref_value_01  = 0,			\
+		.vref_range_01  = 0,			\
+		.rtt_park_10    = ddr4_rttpark_48ohm,	\
+		.vref_value_10  = 0x1f,			\
+		.vref_range_10  = 0,			\
+		.rtt_park_11    = 0,			\
+		.vref_value_11  = 0,			\
+		.vref_range_11  = 0			\
+	}						\
+}
+
+#define OCTEON_NIC23_CN73XX_DRAM_ODT_1RANK_CONFIGURATION		\
+	/*   1 */							\
+	{								\
+		ddr4_dqx_driver_34_ohm,					\
+		0x00000000ULL,						\
+		OCTEON_NIC23_MODEREG_PARAMS1_1RANK_1SLOT,		\
+		OCTEON_NIC23_MODEREG_PARAMS2_1RANK_1SLOT,		\
+		ddr4_rodt_ctl_48_ohm,					\
+		0x00000000ULL,						\
+		0							\
+	},								\
+	/*   2 */							\
+	{								\
+		ddr4_dqx_driver_34_ohm,					\
+		0x00000000ULL,						\
+		OCTEON_NIC23_MODEREG_PARAMS1_1RANK_2SLOT,		\
+		OCTEON_NIC23_MODEREG_PARAMS2_1RANK_2SLOT,		\
+		ddr4_rodt_ctl_80_ohm,					\
+		0x00000000ULL,						\
+		0							\
+	}
+
+/*
+ * Construct a static initializer for the ddr_configuration_t variable that
+ * holds (almost) all of the information required for DDR initialization.
+ */
+
+/*
+ * The parameters below make up the custom_lmc_config data structure.
+ * This structure is used to customize the way that the LMC DRAM
+ * Controller is configured for a particular board design.
+ *
+ * Refer to the file lib_octeon_board_table_entry.h for a description
+ * of the custom board settings.  It is usually kept in the following
+ * location... arch/mips/include/asm/arch-octeon/
+ *
+ */
+
+#define OCTEON_NIC23_DDR_CONFIGURATION					\
+/* Interface 0 */							\
+{									\
+	.custom_lmc_config = {						\
+		.min_rtt_nom_idx	= 2,				\
+		.max_rtt_nom_idx	= 5,				\
+		.min_rodt_ctl		= 2,				\
+		.max_rodt_ctl		= 4,				\
+		.ck_ctl                 = ddr4_driver_34_ohm,           \
+		.cmd_ctl                = ddr4_driver_34_ohm,           \
+		.ctl_ctl                = ddr4_driver_34_ohm,           \
+		.min_cas_latency	= 7,				\
+		.offset_en		= 1,				\
+		.offset_udimm		= 2,				\
+		.offset_rdimm		= 2,				\
+		.ddr_rtt_nom_auto	= 0,				\
+		.ddr_rodt_ctl_auto	= 0,				\
+		.rlevel_compute		= 0,				\
+		.ddr2t_udimm		= 1,				\
+		.ddr2t_rdimm		= 1,				\
+		.maximum_adjacent_rlevel_delay_increment = 2,           \
+		.fprch2			= 2,				\
+		.dll_write_offset       = NULL,                         \
+		.dll_read_offset        = NULL,                         \
+		.disable_sequential_delay_check = 1,                    \
+		.parity			= 0				\
+	},								\
+	.dimm_config_table = {						\
+		OCTEON_NIC23_DRAM_SOCKET_CONFIGURATION0,		\
+		DIMM_CONFIG_TERMINATOR					\
+	},								\
+	.unbuffered = {							\
+		.ddr_board_delay = 0,					\
+		.lmc_delay_clk = 0,					\
+		.lmc_delay_cmd = 0,					\
+		.lmc_delay_dq = 0					\
+	},								\
+	.registered = {							\
+		.ddr_board_delay = 0,					\
+		.lmc_delay_clk = 0,					\
+		.lmc_delay_cmd = 0,					\
+		.lmc_delay_dq = 0					\
+	},								\
+	.odt_1rank_config = {						\
+		OCTEON_NIC23_CN73XX_DRAM_ODT_1RANK_CONFIGURATION	\
+	},								\
+},
+
+#endif /* __BOARD_DDR_H__ */
diff --git a/configs/octeon_nic23_defconfig b/configs/octeon_nic23_defconfig
new file mode 100644
index 000000000000..f36af437c029
--- /dev/null
+++ b/configs/octeon_nic23_defconfig
@@ -0,0 +1,70 @@
+CONFIG_MIPS=y
+CONFIG_SYS_TEXT_BASE=0xffffffff80000000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0xe000
+CONFIG_ENV_SECT_SIZE=0x100
+CONFIG_DEBUG_UART_BASE=0x8001180000000800
+CONFIG_DEBUG_UART_CLOCK=800000000
+CONFIG_ARCH_OCTEON=y
+CONFIG_TARGET_OCTEON_NIC23=y
+# CONFIG_MIPS_CACHE_SETUP is not set
+# CONFIG_MIPS_CACHE_DISABLE is not set
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_OF_BOARD_FIXUP=y
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+# CONFIG_SYS_DEVICE_NULLDEV is not set
+CONFIG_ARCH_MISC_INIT=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_EFI_PARTITION=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_ADDR=0xe000
+CONFIG_SATA=y
+CONFIG_AHCI_MVEBU=y
+CONFIG_CLK=y
+# CONFIG_INPUT is not set
+CONFIG_MISC=y
+CONFIG_MMC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_OCTEONTX=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_NETDEVICES is not set
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_RAM=y
+CONFIG_RAM_OCTEON=y
+CONFIG_RAM_OCTEON_DDR4=y
+CONFIG_SCSI=y
+CONFIG_DEBUG_UART_SHIFT=3
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_SYS_NS16550=y
+CONFIG_OCTEON_SERIAL_BOOTCMD=y
+CONFIG_OCTEON_SERIAL_PCIE_CONSOLE=y
+CONFIG_SPI=y
+CONFIG_OCTEON_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_OCTEON=y
+CONFIG_HEXDUMP=y
diff --git a/include/configs/octeon_nic23.h b/include/configs/octeon_nic23.h
new file mode 100644
index 000000000000..0a7b4d8f93e2
--- /dev/null
+++ b/include/configs/octeon_nic23.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019-2020
+ * Marvell <www.marvell.com>
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+/*
+ * SATA/SCSI/AHCI configuration
+ */
+/* AHCI support Definitions */
+/** Enable 48-bit SATA addressing */
+#define CONFIG_LBA48
+/** Enable 64-bit addressing */
+#define CONFIG_SYS_64BIT_LBA
+
+#include "octeon_common.h"
+
+#endif /* __CONFIG_H__ */
-- 
2.31.1


    