Add a bootmeth driver which handles EFI boot, using EFI_LOADER.
In effect, this provides the same functionality as the 'bootefi' command and shares the same code. But the interface into it is via a bootmeth, so it does not require any special scripts, etc.
For now this requires the 'bootefi' command be enabled. Future work may tidy this up so that it can be used without CONFIG_CMDLINE being enabled.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
boot/Kconfig | 21 ++++ boot/Makefile | 1 + boot/bootmeth_efi.c | 263 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 285 insertions(+) create mode 100644 boot/bootmeth_efi.c
diff --git a/boot/Kconfig b/boot/Kconfig index 7e948f95e92..ebbd7427d7f 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -318,6 +318,27 @@ config BOOTMETH_DISTRO_PXE
This provides a way to try out standard boot on an existing boot flow.
+config BOOTMETH_EFILOADER + bool "Bootdev support for EFI boot" + depends on CMD_BOOTEFI + default y + help + Enables support for EFI boot using bootdevs. This makes the + bootdevs look for a 'boot<arch>.efi' on each filesystem + they scan. The resulting file is booted after enabling U-Boot's + EFI loader support. + + The <arch> depends on the architecture of the board: + + aa64 - aarch64 (ARM 64-bit) + arm - ARM 32-bit + ia32 - x86 32-bit + x64 - x86 64-bit + riscv32 - RISC-V 32-bit + riscv64 - RISC-V 64-bit + + This provides a way to try out standard boot on an existing boot flow. + endif
config LEGACY_IMAGE_FORMAT diff --git a/boot/Makefile b/boot/Makefile index 170fcac8ec4..c2345435201 100644 --- a/boot/Makefile +++ b/boot/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootstd-uclass.o
obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_DISTRO) += bootmeth_distro.o obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_DISTRO_PXE) += bootmeth_pxe.o +obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_EFILOADER) += bootmeth_efi.o
obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o obj-$(CONFIG_$(SPL_TPL_)FIT_SIGNATURE) += fdt_region.o diff --git a/boot/bootmeth_efi.c b/boot/bootmeth_efi.c new file mode 100644 index 00000000000..eeb8f377c50 --- /dev/null +++ b/boot/bootmeth_efi.c @@ -0,0 +1,263 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Bootmethod for distro boot via EFI + * + * Copyright 2021 Google LLC + * Written by Simon Glass sjg@chromium.org + */ + +#include <common.h> +#include <bootdev.h> +#include <bootflow.h> +#include <bootmeth.h> +#include <command.h> +#include <dm.h> +#include <efi_loader.h> +#include <fs.h> +#include <malloc.h> +#include <mapmem.h> +#include <mmc.h> +#include <pxe_utils.h> + +#define EFI_DIRNAME "efi/boot/" + +/** + * get_efi_leafname() - Get the leaf name for the EFI file we expect + * + * @str: Place to put leaf name for this architecture, e.g. "bootaa64.efi". + * Must have at least 16 bytes of space + * @max_len: Length of @str, must be >=16 + */ +static int get_efi_leafname(char *str, int max_len) +{ + const char *base; + + if (max_len < 16) + return log_msg_ret("spc", -ENOSPC); + if (IS_ENABLED(CONFIG_ARM64)) + base = "bootaa64"; + else if (IS_ENABLED(CONFIG_ARM)) + base = "bootarm"; + else if (IS_ENABLED(CONFIG_X86_RUN_32BIT)) + base = "bootia32"; + else if (IS_ENABLED(CONFIG_X86_RUN_64BIT)) + base = "bootx64"; + else if (IS_ENABLED(CONFIG_ARCH_RV32I)) + base = "bootriscv32"; + else if (IS_ENABLED(CONFIG_ARCH_RV64I)) + base = "bootriscv64"; + else if (IS_ENABLED(CONFIG_SANDBOX)) + base = "bootsbox"; + else + return -EINVAL; + + strcpy(str, base); + strcat(str, ".efi"); + + return 0; +} + +static int efiload_read_file(struct blk_desc *desc, struct bootflow *bflow) +{ + const struct udevice *media_dev; + int size = bflow->size; + char devnum_str[9]; + char dirname[200]; + loff_t bytes_read; + char *last_slash; + ulong addr; + char *buf; + int ret; + + /* Sadly FS closes the file after fs_size() so we must redo this */ + ret = fs_set_blk_dev_with_part(desc, bflow->part); + if (ret) + return log_msg_ret("set", ret); + + buf = malloc(size + 1); + if (!buf) + return log_msg_ret("buf", -ENOMEM); + addr = map_to_sysmem(buf); + + ret = fs_read(bflow->fname, addr, 0, 0, &bytes_read); + if (ret) { + free(buf); + return log_msg_ret("read", ret); + } + if (size != bytes_read) + return log_msg_ret("bread", -EINVAL); + buf[size] = '\0'; + bflow->state = BOOTFLOWST_READY; + bflow->buf = buf; + + /* + * This is a horrible hack to tell EFI about this boot device. Once we + * unify EFI with the rest of U-Boot we can clean this up. The same hack + * exists in multiple places, e.g. in the fs, tftp and load commands. + * + * Once we can clean up the EFI code to make proper use of driver model, + * this can go away. + */ + media_dev = dev_get_parent(bflow->dev); + snprintf(devnum_str, sizeof(devnum_str), "%x", dev_seq(media_dev)); + + strlcpy(dirname, bflow->fname, sizeof(dirname)); + last_slash = strrchr(dirname, '/'); + if (last_slash) + *last_slash = '\0'; + + efi_set_bootdev(dev_get_uclass_name(media_dev), devnum_str, dirname, + bflow->buf, size); + + return 0; +} + +static int distro_efi_check(struct udevice *dev, struct bootflow_iter *iter) +{ + int ret; + + /* This only works on block devices */ + ret = bootflow_iter_uses_blk_dev(iter); + if (ret) + return log_msg_ret("blk", ret); + + return 0; +} + +static int distro_efi_read_bootflow(struct udevice *dev, struct bootflow *bflow) +{ + struct blk_desc *desc = dev_get_uclass_plat(bflow->blk); + char fname[sizeof(EFI_DIRNAME) + 16]; + loff_t size; + int ret; + + /* We require a partition table */ + if (!bflow->part) + return -ENOENT; + + strcpy(fname, EFI_DIRNAME); + ret = get_efi_leafname(fname + strlen(fname), + sizeof(fname) - strlen(fname)); + if (ret) + return log_msg_ret("leaf", ret); + + bflow->fname = strdup(fname); + if (!bflow->fname) + return log_msg_ret("name", -ENOMEM); + ret = fs_size(bflow->fname, &size); + bflow->size = size; + if (ret) + return log_msg_ret("size", ret); + bflow->state = BOOTFLOWST_FILE; + log_debug(" - distro file size %x\n", (uint)size); + if (size > 0x2000000) + return log_msg_ret("chk", -E2BIG); + + ret = efiload_read_file(desc, bflow); + if (ret) + return log_msg_ret("read", -EINVAL); + + return 0; +} + +static int distro_efi_read_file(struct udevice *dev, struct bootflow *bflow, + const char *file_path, ulong addr, ulong *sizep) +{ + struct blk_desc *desc = dev_get_uclass_plat(bflow->blk); + const struct udevice *media_dev; + int size = bflow->size; + char devnum_str[9]; + char dirname[200]; + loff_t bytes_read; + char *last_slash; + char *buf; + int ret; + + /* Sadly FS closes the file after fs_size() so we must redo this */ + ret = fs_set_blk_dev_with_part(desc, bflow->part); + if (ret) + return log_msg_ret("set", ret); + + buf = malloc(size + 1); + if (!buf) + return log_msg_ret("buf", -ENOMEM); + addr = map_to_sysmem(buf); + + ret = fs_read(bflow->fname, addr, 0, 0, &bytes_read); + if (ret) { + free(buf); + return log_msg_ret("read", ret); + } + if (size != bytes_read) + return log_msg_ret("bread", -EINVAL); + buf[size] = '\0'; + bflow->state = BOOTFLOWST_READY; + bflow->buf = buf; + + /* + * This is a horrible hack to tell EFI about this boot device. Once we + * unify EFI with the rest of U-Boot we can clean this up. The same hack + * exists in multiple places, e.g. in the fs, tftp and load commands. + * + * Once we can clean up the EFI code to make proper use of driver model, + * this can go away. + */ + media_dev = dev_get_parent(bflow->dev); + snprintf(devnum_str, sizeof(devnum_str), "%x", dev_seq(media_dev)); + + strlcpy(dirname, bflow->fname, sizeof(dirname)); + last_slash = strrchr(dirname, '/'); + if (last_slash) + *last_slash = '\0'; + + efi_set_bootdev(dev_get_uclass_name(media_dev), devnum_str, dirname, + bflow->buf, size); + + return 0; +} + +int distro_efi_boot(struct udevice *dev, struct bootflow *bflow) +{ + char cmd[50]; + + /* + * At some point we can add a real interface to bootefi so we can call + * this directly. For now, go through the CLI like distro boot. + */ + snprintf(cmd, sizeof(cmd), "bootefi %lx %lx", + (ulong)map_to_sysmem(bflow->buf), + (ulong)map_to_sysmem(gd->fdt_blob)); + if (run_command(cmd, 0)) + return log_msg_ret("run", -EINVAL); + + return 0; +} + +static int distro_bootmeth_efi_bind(struct udevice *dev) +{ + struct bootmeth_uc_plat *plat = dev_get_uclass_plat(dev); + + plat->desc = "EFI boot from a .efi file"; + + return 0; +} + +static struct bootmeth_ops distro_efi_bootmeth_ops = { + .check = distro_efi_check, + .read_bootflow = distro_efi_read_bootflow, + .read_file = distro_efi_read_file, + .boot = distro_efi_boot, +}; + +static const struct udevice_id distro_efi_bootmeth_ids[] = { + { .compatible = "u-boot,distro-efi" }, + { } +}; + +U_BOOT_DRIVER(bootmeth_efi) = { + .name = "bootmeth_efi", + .id = UCLASS_BOOTMETH, + .of_match = distro_efi_bootmeth_ids, + .ops = &distro_efi_bootmeth_ops, + .bind = distro_bootmeth_efi_bind, +};