Dear Bo Shen,
Bo Shen voice.shen@atmel.com writes:
Enable SPL support for at91sam9n12ek boards, now it supports boot up from NAND flash, serial flash.
Signed-off-by: Bo Shen voice.shen@atmel.com
Changes in v2:
- Remove the meaningless prefix "+S:" in configuration file.
arch/arm/mach-at91/Kconfig | 1 + arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/include/mach/at91_pmc.h | 4 +- arch/arm/mach-at91/mpddrc.c | 2 +- arch/arm/mach-at91/spl_at91.c | 2 +- board/atmel/at91sam9n12ek/at91sam9n12ek.c | 73 ++++++++++++++++++++++++++++++ configs/at91sam9n12ek_nandflash_defconfig | 1 + configs/at91sam9n12ek_spiflash_defconfig | 1 + include/configs/at91sam9n12ek.h | 58 +++++++++++++++++++++++- 9 files changed, 138 insertions(+), 5 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards, Andreas Bießmann