On Thu, Sep 5, 2024 at 8:54 AM Lukasz Majewski lukma@denx.de wrote:
Hi Adam,
On Wed, Aug 28, 2024 at 3:04 AM Lukasz Majewski lukma@denx.de wrote:
Hi Simon,
Hi,
On Tue, 27 Aug 2024 at 12:47, Fabio Estevam festevam@gmail.com wrote:
Hi Lukasz,
On Thu, Aug 15, 2024 at 5:14 PM Lukasz Majewski lukma@denx.de wrote:
Unfortunately not - this change is only for properly setting start address of the u-boot.
The _real_ problem here is the symbol placement generated by binman when we try to define the image as a single one.
Moreover, this change follows other boards with imx8mm processor - ./configs/imx8mm_beacon_fspi_defconfig to be specific.
The "fix" (for which I'd been now probably opt) for this issue would be to generate two images with binman - one for u-boot-spl-ddr.bin and the final flash.bin with the former one included (as it was before SHA1: 37e50627efacd8dae18b564e9d8886a033e181bc)
Is QSPI boot broken on i.MX8MM?
I am adding Adam and Mamta who have tested QSPI booting on imx8mm_beacon and imx8mm_evk, respectively.
Note also that I sent a series[1] which allows the symbols-base to be adjusted, if that helps.
I've seen them - but not yet tested.
Thanks Simon for the patch series.
Is it still broken with this patch series? I have been traveling and haven't had much time to test.
Yes, I can confirm that it is still broken.
Sorry for the delay. I had to return my 8MM to Beacon, and I was waiting for a replacement.
To not prolong it anymore, I decided to try it with an 8M Nano, and I got a boot failure on master. I was able to successfully boot 2024.01-rc5, but I haven't had time to bisect it yet. I'll try to do that this week. I think once we can bisect the error, it might become more apparent.
adam
I've applied: https://patchwork.ozlabs.org/project/uboot/cover/20240826191143.426387-1-sjg...
on top of mainline: SHA1: 1630ff26cc960439b5949b80cfc604a2c8aa47dd
Adding symbols-base = <0>; to imx8mm-u-boot.dtsi did not help.
adam
Regards, Simon
[1] https://patchwork.ozlabs.org/project/uboot/list/?series=421010
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de