Am 25.09.2013 15:39, schrieb Richard Genoud:
2013/9/25 Richard Weinberger richard@nod.at:
Am 25.09.2013 14:13, schrieb Richard Genoud:
Before we waste time, please ensure that you have all recent UBI fixes applied. UBI: Fix PEB leak in wear_leveling_worker() (Merged into 3.12-rc1, on it's way to -stable) UBI: Fix invalidate_fastmap() (Merged into 3.12-rc1) UBI: Fix refill_wl_user_pool() (Pending, http://lkml.org/lkml/2013/8/26/121)
yes, I have them: git log --oneline v3.11.1..HEAD -- drivers/mtd/ubi/ 241bac5 UBI: fix refill_wl_user_pool() a5858cf UBI: Fix invalidate_fastmap() fd00289 UBI: Fix PEB leak in wear_leveling_worker()
Oh, this makes me sad. ;-)
This is not the top most error. Do you have to full log? Would be nice to know why fastmap has fallen back to a full scan.
Here's the full log for this one: Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.11.1 (rgenoud@lnx-rg) (gcc version 4.7.3 (Buildroot 2013.05-00178-gd93036d-dirty) ) #5 Tue Sep 24 15:24:16 CEST 2013 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Atmel AT91SAM (Device Tree), model: Paratronic LNS [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] AT91: Detected soc type: at91sam9x5 [ 0.000000] AT91: Detected soc subtype: at91sam9g35 [ 0.000000] AT91: sram at 0x300000 of 0x8000 mapped at 0xfef70000 [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] free_area_init_node: node 0, pgdat c0374ccc, node_mem_map c03a6000 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] Clocks: CPU 400 MHz, master 133 MHz, main 12.000 MHz [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 loglevel=8 ubi.fm_autoconvert=1 rw root=ubi0:rootfs rootfstype=ubifs ubi.mtd=UBI [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 126100K/131072K available (2474K kernel code, 140K rwdata, 776K rodata, 115K init, 194K bss, 4972K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0334eec (3252 kB) [ 0.000000] .init : 0xc0335000 - 0xc0351f14 ( 116 kB) [ 0.000000] .data : 0xc0352000 - 0xc03753a0 ( 141 kB) [ 0.000000] .bss : 0xc03753a0 - 0xc03a5cf8 ( 195 kB) [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] sched_clock: 32 bits at 128 Hz, resolution 7812500ns, wraps every 3489660920ms [ 0.000000] Console: colour dummy device 80x30 [ 0.054687] Calibrating delay loop... 198.76 BogoMIPS (lpj=775168) [ 0.054687] pid_max: default: 32768 minimum: 301 [ 0.062500] Mount-cache hash table entries: 512 [ 0.070312] CPU: Testing write buffer coherency: ok [ 0.070312] Setting up static identity map for 0xc0257aa8 - 0xc0257ae4 [ 0.078125] devtmpfs: initialized [ 0.078125] pinctrl core: initialized pinctrl subsystem [ 0.078125] NET: Registered protocol family 16 [ 0.078125] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.109375] gpio-at91 fffff400.gpio: at address fefff400 [ 0.109375] gpio-at91 fffff600.gpio: at address fefff600 [ 0.109375] gpio-at91 fffff800.gpio: at address fefff800 [ 0.117187] gpio-at91 fffffa00.gpio: at address fefffa00 [ 0.117187] pinctrl-at91 pinctrl.2: initialized AT91 pinctrl driver [ 0.117187] tcb_clksrc: tc0 at 16.166 MHz [ 0.148437] bio: create slab <bio-0> at 0 [ 0.148437] at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels [ 0.156250] at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels [ 0.164062] Switched to clocksource tcb_clksrc [ 0.218750] NET: Registered protocol family 2 [ 0.218750] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.218750] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.218750] TCP: Hash tables configured (established 1024 bind 1024) [ 0.218750] TCP: reno registered [ 0.218750] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.218750] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.218750] NET: Registered protocol family 1 [ 0.218750] RPC: Registered named UNIX socket transport module. [ 0.218750] RPC: Registered udp transport module. [ 0.218750] RPC: Registered tcp transport module. [ 0.218750] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.226562] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.226562] msgmni has been set to 246 [ 0.234375] NET: Registered protocol family 38 [ 0.234375] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.234375] io scheduler noop registered (default) [ 0.242187] gpio-export gpio_export.5: 16 gpio(s) exported [ 0.242187] fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16) is a ATMEL_SERIAL [ 0.593750] console [ttyS0] enabled [ 0.601562] f801c000.serial: ttyS1 at MMIO 0xf801c000 (irq = 23) is a ATMEL_SERIAL [ 0.609375] f8020000.serial: ttyS2 at MMIO 0xf8020000 (irq = 24) is a ATMEL_SERIAL [ 0.625000] brd: module loaded [ 0.640625] loop: module loaded [ 0.656250] atmel_nand: Use On Flash BBT [ 0.656250] atmel_nand 40000000.nand: Using dma0chan0 for DMA transfers. [ 0.664062] ONFI param page 0 valid [ 0.671875] ONFI flash detected [ 0.671875] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64 [ 0.679687] atmel_nand 40000000.nand: ONFI params, minimum required ECC: 4 bits in 512 bytes [ 0.687500] atmel_nand 40000000.nand: Initialize PMECC params, cap: 4, sector: 512 [ 0.695312] Bad block table found at page 131008, version 0x01 [ 0.703125] Bad block table found at page 130944, version 0x01 [ 0.710937] 4 ofpart partitions found on MTD device atmel_nand [ 0.710937] Creating 4 MTD partitions on "atmel_nand": [ 0.718750] 0x000000000000-0x000000020000 : "dtb" [ 0.726562] 0x000000020000-0x000000a00000 : "Kernel" [ 0.734375] 0x000000a00000-0x00000ff80000 : "UBI" [ 0.742187] 0x00000ff80000-0x000010000000 : "BBT" [ 0.757812] libphy: MACB_mii_bus: probed [ 0.765625] macb f802c000.ethernet eth0: Cadence MACB at 0xf802c000 irq 25 (00:04:a3:91:c4:e3) [ 0.773437] macb f802c000.ethernet eth0: attached PHY driver [Davicom DM9161A] (mii_bus:phy_addr=f802c000.etherne:00, irq=-1) [ 0.781250] at91sam9_wdt: sorry, watchdog is disabled [ 0.789062] at91_wdt: probe of fffffe40.wdt failed with error -5 [ 0.796875] TCP: cubic registered [ 0.804687] NET: Registered protocol family 17 [ 0.804687] Key type dns_resolver registered [ 0.812500] UBI: default fastmap pool size: 95 [ 0.820312] UBI: default fastmap WL pool size: 25 [ 0.820312] UBI: attaching mtd2 to ubi0 [ 0.851562] UBI error: ubi_scan_fastmap: Attach by fastmap failed, doing a full scan!
Okay, you hit a code path which does not call ubi_err() and just terminates the attach function. These paths are mostly fatal errors like OOM or major problems with the fastmap disk-layout. So, we need a debug-patch. By end of the week I'll send one.
[ 1.593750] UBI: scanning is finished [ 1.601562] UBI assert failed in ubi_wl_init at 1967 (pid 1) [ 1.609375] CPU: 0 PID: 1 Comm: swapper Not tainted 3.11.1 #5 [ 1.617187] [<c0012e20>] (unwind_backtrace+0x0/0xe0) from [<c0010bb8>] (show_stack+0x10/0x14) [ 1.625000] [<c0010bb8>] (show_stack+0x10/0x14) from [<c01a0704>] (ubi_wl_init+0x3d0/0x4b8) [ 1.632812] [<c01a0704>] (ubi_wl_init+0x3d0/0x4b8) from [<c01a2cd4>] (ubi_attach+0x270/0x34c) [ 1.640625] [<c01a2cd4>] (ubi_attach+0x270/0x34c) from [<c0197678>] (ubi_attach_mtd_dev+0x2b8/0x86c) [ 1.648437] [<c0197678>] (ubi_attach_mtd_dev+0x2b8/0x86c) from [<c0346630>] (ubi_init+0x1d8/0x29c) [ 1.656250] [<c0346630>] (ubi_init+0x1d8/0x29c) from [<c0008810>] (do_one_initcall+0x94/0x144) [ 1.664062] [<c0008810>] (do_one_initcall+0x94/0x144) from [<c0335a9c>] (kernel_init_freeable+0xe8/0x1ac) [ 1.671875] [<c0335a9c>] (kernel_init_freeable+0xe8/0x1ac) from [<c0251500>] (kernel_init+0x8/0xe4) [ 1.679687] [<c0251500>] (kernel_init+0x8/0xe4) from [<c000e590>] (ret_from_fork+0x14/0x24)
What is line wl.c:1967 in your tree?
Is it ubi_assert(ubi->good_peb_count == found_pebs + ubi->fm->used_blocks); or ubi_assert(ubi->good_peb_count == found_pebs);
it's ubi_assert(ubi->good_peb_count == found_pebs); (in the debug log I sent you, it's line 1968 because I added a quick "#define DEBUG" at the top)
Okay. The assert() not correct. It does not honor the case where we have a fastmap found (thus some PEBs are used for the fastmap) but the fastmap has be treated as invalid.
Thanks, //richard