On Sun, Aug 19, 2018 at 07:26:44PM +0530, Jagan Teki wrote:
Usually eMMC is default mmc device for fastboot.
By enabling DM_MMC, the mmc devices are probed as per DT status not with respect to MMC_SUNXI_SLOT_EXTRA in U-Boot proper.
Allwinner SoC has maximum of 4 mmc controllers start from mmc0...mmc3 on which mmc2 can be used an eMMC controller eventhough mmc3 some boards used as eMMC.
So, update the default fastboot device as 2 to make the standard usage irrespective of DT node status.
Other corner cases like different device usage, or specific mmc node status is not enabled in order in DTS must explicitly add config on the specific defconfig file.
Cc: Olliver Schinagl oliver@schinagl.nl Cc: Chen-Yu Tsai wens@csie.org Signed-off-by: Jagan Teki jagan@amarulasolutions.com
This breaks all existing users, since if DM_MMC isn't set (and it isn't at the moment), the MMC IDs won't change, and you're changing it from either 0 or 1 to 2.
Can't we have a DT property instead? It looks much better than having to deal with a non stable ID in Kconfig.
Maxime