In message 43C005EE.9020501@uvigo.es you wrote:
I am studying the feasibility of using the "x86 BIOS emulator" (in /board/MAI/bios_emulator) to initialize an ATI graphics card.
As a first step, I am trying to compile U-Boot for AmigaOneG3SE (which uses the bios_emulator), but there are lots of warnings and errors. I am
I'm afraid you have to dig through this mess - unfortunately the AmigaOneG3SE port has never been really maintained.
Has anyone here compiled U-Boot for AmigaOne? If the answer is affirmative, which toolchain (and version) did you use for the cross-compile? Thanks in advance.
The port was added about 3 years ago (Nov 2002) in the U-Boot-0.2.0 time frame; it was workig by then, at least the Amiga folks released working binaries. I don't know if the code contributed back to the public source tree was ever clean and working - sorry, but I don't have access to such hardware, and there is no other maintainer for this port.
P.S.: I use the ELDK compiler configured for ppc_74xx- under linux x86.
This should work fine. Problems are caused by the unmaintained source tree for this board.
Viele Grüße,
Wolfgang Denk