Hi Marek,
Enable support for DFU over USB. This requires to enable USB gadget, DWC2 UDC OTG driver and DFU command. DFU entities are defined for the following firmware objects: u-boot.bin, uboot.env and zImage.
Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com
configs/rpi_4_32b_defconfig | 11 +++++++++++ include/configs/rpi.h | 10 ++++++++++ 2 files changed, 21 insertions(+)
diff --git a/configs/rpi_4_32b_defconfig b/configs/rpi_4_32b_defconfig index a31a617a5fb..0a375b97369 100644 --- a/configs/rpi_4_32b_defconfig +++ b/configs/rpi_4_32b_defconfig @@ -12,6 +12,7 @@ CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_MMC=y @@ -19,6 +20,7 @@ CONFIG_CMD_FS_UUID=y CONFIG_ENV_FAT_INTERFACE="mmc" CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_DFU_MMC=y CONFIG_DM_KEYBOARD=y CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y @@ -26,6 +28,15 @@ CONFIG_MMC_SDHCI_BCM2835=y CONFIG_PINCTRL=y # CONFIG_PINCTRL_GENERIC is not set # CONFIG_REQUIRE_SERIAL_CONSOLE is not set +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_DM_USB_GADGET=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_DM_VIDEO=y CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_CONSOLE_SCROLL_LINES=10 diff --git a/include/configs/rpi.h b/include/configs/rpi.h index 77d2d5458a1..f502915ad53 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -70,9 +70,18 @@ #define CONFIG_TFTP_TSIZE #endif
+/* DFU over USB/UDC */ +#ifdef CONFIG_CMD_DFU +#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_1M +#define CONFIG_SYS_DFU_MAX_FILE_SIZE SZ_2M +#define ENV_DFU_SETTINGS \
- "dfu_alt_info=u-boot.bin fat 0 1;uboot.env fat 0 1;zImage
fat 0 1" +#endif
/* Console configuration */ #define CONFIG_SYS_CBSIZE 1024
/* Environment */ #define CONFIG_ENV_SIZE SZ_16K #define CONFIG_SYS_LOAD_ADDR 0x1000000 @@ -185,6 +194,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "dhcpuboot=usb start; dhcp u-boot.uimg; bootm\0" \ ENV_DEVICE_SETTINGS \
- ENV_DFU_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ BOOTENV
Reviewed-by: Lukasz Majewski lukma@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de