Dear Gregory CLEMENT,
On Wed, 16 Dec 2015 11:34:00 +0100, Gregory CLEMENT wrote:
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index c333647..d7e36cb 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -114,6 +114,12 @@ config TARGET_SMARTWEB select CPU_ARM926EJS select SUPPORT_SPL
+config TARGET_VINCO
- bool "Support VINCO"
- select CPU_V7
- select SUPPORT_SPL
One too many empty line.
endchoice
config SYS_SOC @@ -143,5 +149,6 @@ source "board/ronetix/pm9g45/Kconfig" source "board/siemens/corvus/Kconfig" source "board/siemens/taurus/Kconfig" source "board/siemens/smartweb/Kconfig" +source "board/l+g/vinco/Kconfig"
Alphabetic ordering should be respected here.
diff --git a/board/l+g/vinco/Makefile b/board/l+g/vinco/Makefile new file mode 100644 index 0000000..d68b3e4 --- /dev/null +++ b/board/l+g/vinco/Makefile @@ -0,0 +1,2 @@
Useless newline.
+obj-y += vinco.o diff --git a/board/l+g/vinco/vinco.c b/board/l+g/vinco/vinco.c new file mode 100644 index 0000000..d9ba987 --- /dev/null +++ b/board/l+g/vinco/vinco.c @@ -0,0 +1,212 @@ +/*
- Board file for the VinCo platform
- Based on the the SAMA5-EK board file
- Configuration settings for the VinCo platform.
- Copyright (C) 2014 Atmel
Bo Shen <voice.shen@atmel.com>
- Copyright (C) 2015 Free Electrons
Gregory CLEMENT gregory.clement@free-electrons.com
E-mail address should be enclosed in <...>.
+#ifdef CONFIG_ATMEL_SPI +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{
- return bus == 0 && cs == 0;
+}
+void spi_cs_activate(struct spi_slave *slave) +{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
+}
+void spi_cs_deactivate(struct spi_slave *slave) +{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
+}
+static void sama5d4ek_spi0_hw_init(void)
A function named sama5d4ek in the support for a board named L+G VInCo ?
+{
- at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
- at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
- at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_SPI0);
+} +#endif /* CONFIG_ATMEL_SPI */
+#ifdef CONFIG_CMD_USB +static void sama5d4ek_usb_hw_init(void)
Ditto.
+{
- at91_set_pio_output(AT91_PIO_PORTE, 11, 0);
- at91_set_pio_output(AT91_PIO_PORTE, 12, 0);
- at91_set_pio_output(AT91_PIO_PORTE, 10, 0);
+} +#endif
+#ifdef CONFIG_GENERIC_ATMEL_MCI +void sama5d4ek_mci0_hw_init(void)
Ditto (and multiple times later).
diff --git a/include/configs/vinco.h b/include/configs/vinco.h new file mode 100644 index 0000000..678b04b --- /dev/null +++ b/include/configs/vinco.h @@ -0,0 +1,172 @@ +/*
- Configuration settings for the VInCo platform.
- Based on the settings for the SAMA5-EK board
- Copyright (C) 2014 Atmel
Bo Shen <voice.shen@atmel.com>
- Copyright (C) 2015 Free Electrons
Gregory CLEMENT gregory.clement@free-electrons.com
<...> for e-mail address
- SPDX-License-Identifier: GPL-2.0+
- */
+#ifndef __CONFIG_H +#define __CONFIG_H
+/* No NOR flash, this definition should put before common header */
"should put" ?
+#define CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_SYS_TEXT_BASE +#undef CONFIG_SYS_TEXT_BASE +#endif
Why here? Nothing has been included so far, I guess this is going to be defined by the next line, no?
+#include "at91-sama5_common.h"
+/* The value in the common file is too far away for the VinCo platform */ +#ifdef CONFIG_SYS_TEXT_BASE +#undef CONFIG_SYS_TEXT_BASE +#endif +#define CONFIG_SYS_TEXT_BASE 0x20f00000
Best regards,
Thomas