On Fri, 5 Feb 2021 20:12:03 +0100 Pali Rohár pali@kernel.org wrote:
If udc_endpoint_write() was called with bigger payload which does not fit into one USB packet it needs to be transmitted in more USB packets. First packet is transmitted by udc_endpoint_write() call itself and other packets are put into waiting queue.
Implement function musb_peri_tx() which transmit checks when endpoints are ready and continue transmitting of waiting queue.
This patch fixes sending e.g. output of printenv command over usbtty serial console.
Reviewed-by: Lukasz Majewski lukma@denx.de
Signed-off-by: Pali Rohár pali@kernel.org
drivers/usb/musb/musb_udc.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/musb/musb_udc.c b/drivers/usb/musb/musb_udc.c index 67d1c56f9a..28719cc3f6 100644 --- a/drivers/usb/musb/musb_udc.c +++ b/drivers/usb/musb/musb_udc.c @@ -708,21 +708,16 @@ static void musb_peri_rx(u16 intr)
static void musb_peri_tx(u16 intr) {
- unsigned int ep;
- /* Check for EP0 */ if (0x01 & intr) musb_peri_ep0_tx();
- /*
* Use this in the future when handling epN tx** u8 ep;** for (ep = 1; ep < 16; ep++) {* if ((1 << ep) & intr) {* / * handle tx for this endpoint * /* }* }*/
- for (ep = 1; ep < 16; ep++) {
if ((1 << ep) & intr)udc_endpoint_write(GET_ENDPOINT(udc_device,ep));
- }
}
void udc_irq(void)
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de