Unify memory map for Layerscape based platforms. This patch includes changes in bootscript, bootscript header and PPA header addresses change as per unified memory map.
Signed-off-by: Sumit Garg sumit.garg@nxp.com Tested-by: Vinitha Pillai vinitha.pillai@nxp.com ---
Changes in v3: Rebasing of the patch on top commit. This patch supersedes https://patchwork.ozlabs.org/patch/756260/
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 12 +++---- arch/arm/include/asm/fsl_secure_boot.h | 54 +++++++++++++------------------ 2 files changed, 28 insertions(+), 38 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 5825f9b..b7549a0 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -194,12 +194,12 @@ config SYS_LS_PPA_FW_ADDR config SYS_LS_PPA_ESBC_ADDR hex "hdr address of PPA firmware loading from" depends on FSL_LS_PPA && CHAIN_OF_TRUST - default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A - default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A - default 0x40480000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A - default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3 - default 0x700000 if SYS_LS_PPA_FW_IN_MMC - default 0x700000 if SYS_LS_PPA_FW_IN_NAND + default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A + default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A + default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A + default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3 + default 0x680000 if SYS_LS_PPA_FW_IN_MMC + default 0x680000 if SYS_LS_PPA_FW_IN_NAND help If the PPA header firmware locate at XIP flash, such as NOR or QSPI flash, this address is a directly memory-mapped. diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index b0b3b93..63845a2 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -1,5 +1,6 @@ /* * Copyright 2015 Freescale Semiconductor, Inc. + * Copyright 2017 NXP * * SPDX-License-Identifier: GPL-2.0+ */ @@ -71,55 +72,44 @@ * DDR memory map */ #ifdef CONFIG_FSL_LSCH3 -#define CONFIG_BS_HDR_ADDR_DEVICE 0x580d00000 -#define CONFIG_BS_ADDR_DEVICE 0x580e00000 -#define CONFIG_BS_HDR_ADDR_RAM 0xa0d00000 -#define CONFIG_BS_ADDR_RAM 0xa0e00000 -#define CONFIG_BS_HDR_SIZE 0x00002000 +#define CONFIG_BS_ADDR_DEVICE 0x580600000 +#define CONFIG_BS_HDR_ADDR_DEVICE 0x580640000 #define CONFIG_BS_SIZE 0x00001000 +#define CONFIG_BS_HDR_SIZE 0x00004000 +#define CONFIG_BS_ADDR_RAM 0xa0600000 +#define CONFIG_BS_HDR_ADDR_RAM 0xa0640000 #else #ifdef CONFIG_SD_BOOT /* For SD boot address and size are assigned in terms of sector * offset and no. of sectors respectively. */ -#if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) -#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000920 -#else -#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000900 -#endif -#define CONFIG_BS_ADDR_DEVICE 0x00000940 -#define CONFIG_BS_HDR_SIZE 0x00000010 +#define CONFIG_BS_ADDR_DEVICE 0x00003000 +#define CONFIG_BS_HDR_ADDR_DEVICE 0x00003200 #define CONFIG_BS_SIZE 0x00000008 +#define CONFIG_BS_HDR_SIZE 0x00000010 #elif defined(CONFIG_NAND_BOOT) -#define CONFIG_BS_HDR_ADDR_DEVICE 0x00800000 -#define CONFIG_BS_ADDR_DEVICE 0x00802000 -#define CONFIG_BS_HDR_SIZE 0x00002000 -#define CONFIG_BS_SIZE 0x00001000 -#elif defined(CONFIG_QSPI_BOOT) -#ifdef CONFIG_ARCH_LS1046A -#define CONFIG_BS_HDR_ADDR_DEVICE 0x40780000 -#define CONFIG_BS_ADDR_DEVICE 0x40800000 -#elif defined(CONFIG_ARCH_LS1012A) -#define CONFIG_BS_HDR_ADDR_DEVICE 0x400c0000 -#define CONFIG_BS_ADDR_DEVICE 0x40060000 -#else -#error "Platform not supported" -#endif +#define CONFIG_BS_ADDR_DEVICE 0x00600000 +#define CONFIG_BS_HDR_ADDR_DEVICE 0x00640000 +#define CONFIG_BS_SIZE 0x00001000 #define CONFIG_BS_HDR_SIZE 0x00002000 +#elif defined(CONFIG_QSPI_BOOT) +#define CONFIG_BS_ADDR_DEVICE 0x40600000 +#define CONFIG_BS_HDR_ADDR_DEVICE 0x40640000 #define CONFIG_BS_SIZE 0x00001000 -#else /* Default NOR Boot */ -#define CONFIG_BS_HDR_ADDR_DEVICE 0x600a0000 -#define CONFIG_BS_ADDR_DEVICE 0x60060000 #define CONFIG_BS_HDR_SIZE 0x00002000 +#else /* Default NOR Boot */ +#define CONFIG_BS_ADDR_DEVICE 0x60600000 +#define CONFIG_BS_HDR_ADDR_DEVICE 0x60640000 #define CONFIG_BS_SIZE 0x00001000 +#define CONFIG_BS_HDR_SIZE 0x00002000 #endif -#define CONFIG_BS_HDR_ADDR_RAM 0x81000000 -#define CONFIG_BS_ADDR_RAM 0x81020000 +#define CONFIG_BS_ADDR_RAM 0x81000000 +#define CONFIG_BS_HDR_ADDR_RAM 0x81020000 #endif
#ifdef CONFIG_BOOTSCRIPT_COPY_RAM -#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM #define CONFIG_BOOTSCRIPT_ADDR CONFIG_BS_ADDR_RAM +#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM #else #define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_DEVICE /* BOOTSCRIPT_ADDR is not required */