Hi,
On 26/09/17 01:28 AM, Siva Durga Prasad Paladugu wrote:
Hi,
-----Original Message----- From: Jagan Teki [mailto:jagannadh.teki@gmail.com] Sent: Tuesday, September 26, 2017 10:17 AM To: Liam Beguin liambeguin@gmail.com Cc: u-boot@lists.denx.de; Michal Simek michals@xilinx.com; Siva Durga Prasad Paladugu sivadur@xilinx.com Subject: Re: [U-Boot] ZynqMP qspi
On Tue, Sep 26, 2017 at 9:07 AM, Liam Beguin liambeguin@gmail.com wrote:
Resending with proper CC since the email came back.
On 24/09/17 09:36 PM, Liam Beguin wrote:
Hi,
I'm testing a new Xilinx zynqmp dev board and was not able to probe the qspi with the latest mainline U-Boot. I see that there is a
'zynqmp_qspi'
driver in the Xilinx tree [1] but nothing in mainline. After a little digging, I found a thread on the list [2] (and [3]) and was wondering in what state this was now.
I am planning to send the new series in 1-2 weeks, probably you can wait till then or you can try with the patch[2] and see if you are able to get it working with those( those are known to be working when I sent ). Also, please note that as of now iam targeting only for qspi single mode not the dual modes.
Great, I'll wait for your series and test it as soon as it comes out.
Thanks, Liam
Thanks, Siva
xlnx/blob/master/drivers/spi/zynqmp_
qspi.c [2] https://lists.denx.de/pipermail/u-boot/2016-July/261003.html [3] https://lists.denx.de/pipermail/u-boot/2016-
November/273650.html
I think, Siva is working on it. and he would be best to comment this.
thanks!
Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India.