Re: [U-Boot] AT91RM9200 boots from NOR Flash or not

Dear "Nikumbh, Raj (IE10)",

In message 047570340A9B314187387ACC723459ACAE018E@IE10EV811.global.ds.honeywell.com you wrote:

I want to use the u-boot-1.3.4 with the patch from AT91 for my custom board based on AT91RM9200 with 32MB SDRAM (MT48LC8M16A2) and 8MB flash (AT49BV6416-70TI). I am directly flashing the image to flash location at 0x10000000 (beginning of the flash). But I am not able to see anything on my debug port.

I want to know if I am doing something wrong.

We don't know your hardware or the changes you might have made to the code to adapt it for your hardware.

Also, U-Boot 1.3.4 is very old.

Please update to a current version (top of tree recommended) and try again.

Best regards,

Wolfgang Denk