Add a new netboot_run() function which can be used for simple network operations, such as loading a file. Put the implementation in an internal function, used by the existing code.
Place this function into the net/ code, so that it does not need the command line to be available.
Document which network operations are supported, i.e. a limited subset, for now.
For the one board which uses lwip, it is not quite clear how to avoid using the cmdline interface. This will need some discussion.
Signed-off-by: Simon Glass sjg@chromium.org ---
(no changes since v1)
cmd/net.c | 40 +--------------------------------------- include/net-common.h | 30 ++++++++++++++++++++++++++++++ net/net.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 75 insertions(+), 39 deletions(-)
diff --git a/cmd/net.c b/cmd/net.c index 6d1c6374f76..8f33c9f55d5 100644 --- a/cmd/net.c +++ b/cmd/net.c @@ -382,44 +382,6 @@ static int parse_args(enum proto_t proto, int argc, char *const argv[], return 0; }
-static int netboot_run_(enum proto_t proto, ulong addr, const char *fname, - ulong size, bool fname_explicit, bool ipv6) -{ - int ret; - - bootstage_mark(BOOTSTAGE_ID_NET_START); - - /* - * For now we use the global variables as that is the only way to - * control the network stack. At some point, perhaps, the state could be - * in a struct - */ - if (IS_ENABLED(CONFIG_CMD_TFTPPUT) && proto == TFTPPUT) - image_save_addr = addr; - else - image_load_addr = addr; - - net_boot_file_name_explicit = fname_explicit; - copy_filename(net_boot_file_name, fname, sizeof(net_boot_file_name)); - if (IS_ENABLED(CONFIG_IPV6)) - use_ip6 = ipv6; - if (IS_ENABLED(CONFIG_CMD_TFTPPUT) && proto == TFTPPUT) { - image_save_addr = addr; - image_save_size = size; - } else { - image_load_addr = addr; - } - - ret = net_loop(proto); - if (ret < 0) { - bootstage_error(BOOTSTAGE_ID_NET_NETLOOP_OK); - return ret; - } - bootstage_mark(BOOTSTAGE_ID_NET_NETLOOP_OK); - - return 0; -} - static int netboot_common(enum proto_t proto, struct cmd_tbl *cmdtp, int argc, char *const argv[]) { @@ -475,7 +437,7 @@ static int netboot_common(enum proto_t proto, struct cmd_tbl *cmdtp, int argc, }
size = netboot_run_(proto, addr, fname, save_size, fname_explicit, - use_ip6); + IS_ENABLED(CONFIG_IPV6) && use_ip6); if (size < 0) return CMD_RET_FAILURE;
diff --git a/include/net-common.h b/include/net-common.h index c5e314b360d..12c50e2a41e 100644 --- a/include/net-common.h +++ b/include/net-common.h @@ -474,6 +474,36 @@ int net_init(void); enum proto_t; int net_loop(enum proto_t protocol);
+/* internal function: do not use! */ +int netboot_run_(enum proto_t proto, ulong addr, const char *fname, ulong size, + bool fname_explicit, bool ipv6); + +/** + * netboot_run() - Run a network operation + * + * The following proto values are NOT supported: + * PING, since net_ping_ip cannot be set + * NETCONS, since its parameters cannot bet set + * RS, since first_call cannot be set, along with perhaps other things + * UDP, since udp_ops cannot be set + * DNS, since net_dns_resolve and net_dns_env_var cannot be set + * WGET, since DNS must be done first and that is not supported + * DHCP6, since the required parameters cannot be passed in + * + * To support one of these, either add the required arguments or perhaps a + * separate function and a struct to hold the information. + * + * @proto: Operation to run: TFTPGET, FASTBOOT_UDP, FASTBOOT_TCP, BOOTP, + * TFTPPUT, RARP, NFS, DHCP + * @addr: Load/save address + * @fname: Filename + * @size: Save size (not used for TFTPGET) + * @ipv6: true to use IPv6, false to use IPv4 + * Return 0 on success, else -ve error code + */ +int netboot_run(enum proto_t proto, ulong addr, const char *fname, ulong size, + bool ipv6); + /** * dhcp_run() - Run DHCP on the current ethernet device * diff --git a/net/net.c b/net/net.c index ca35704f661..da98460a667 100644 --- a/net/net.c +++ b/net/net.c @@ -770,6 +770,50 @@ done: return ret; }
+int netboot_run_(enum proto_t proto, ulong addr, const char *fname, ulong size, + bool fname_explicit, bool ipv6) +{ + int ret; + + bootstage_mark(BOOTSTAGE_ID_NET_START); + + /* + * For now we use the global variables as that is the only way to + * control the network stack. At some point, perhaps, the state could be + * in a struct + */ + if (IS_ENABLED(CONFIG_CMD_TFTPPUT) && proto == TFTPPUT) + image_save_addr = addr; + else + image_load_addr = addr; + + net_boot_file_name_explicit = fname_explicit; + copy_filename(net_boot_file_name, fname, sizeof(net_boot_file_name)); + if (IS_ENABLED(CONFIG_IPV6)) + use_ip6 = ipv6; + if (IS_ENABLED(CONFIG_CMD_TFTPPUT) && proto == TFTPPUT) { + image_save_addr = addr; + image_save_size = size; + } else { + image_load_addr = addr; + } + + ret = net_loop(proto); + if (ret < 0) { + bootstage_error(BOOTSTAGE_ID_NET_NETLOOP_OK); + return ret; + } + bootstage_mark(BOOTSTAGE_ID_NET_NETLOOP_OK); + + return 0; +} + +int netboot_run(enum proto_t proto, ulong addr, const char *fname, ulong size, + bool ipv6) +{ + return netboot_run_(proto, addr, fname, size, true, ipv6); +} + /**********************************************************************/
static void start_again_timeout_handler(void)