Signed-off-by: Eric Nelson eric@nelint.com --- Note that I haven't tested this board because I don't currently have one.
configs/mx6memcal_warpboard_defconfig | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 configs/mx6memcal_warpboard_defconfig
diff --git a/configs/mx6memcal_warpboard_defconfig b/configs/mx6memcal_warpboard_defconfig new file mode 100644 index 0000000..0ec1b3c --- /dev/null +++ b/configs/mx6memcal_warpboard_defconfig @@ -0,0 +1,32 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_MX6_DDRCAL=y +CONFIG_TARGET_MX6MEMCAL=y +CONFIG_DDRWIDTH=32 +CONFIG_DDRCS=1 +CONFIG_LPDDR2=y +CONFIG_MT29PZZZ4D4BKESK=y +CONFIG_DRAM_DRIVE_STRENGTH=4 +CONFIG_RALAT=2 +CONFIG_UART1_UART1=y +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6SL" +# CONFIG_CMD_BOOTD is not set +# CONFIG_CMD_BOOTM is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_GO is not set +# CONFIG_CMD_RUN is not set +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_SAVEENV is not set +# CONFIG_CMD_ENV_EXISTS is not set +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_CMD_NET is not set +# CONFIG_CMD_NFS is not set