This allows baseboards without SPI to compile.
Signed-off-by: Clemens Gruber clemens.gruber@pqgruber.com Cc: Markus Niebel Markus.Niebel@tq-group.com Cc: Tom Rini trini@konsulko.com --- board/tqc/tqma6/tqma6.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c index 29db838..5c4d104 100644 --- a/board/tqc/tqma6/tqma6.c +++ b/board/tqc/tqma6/tqma6.c @@ -131,6 +131,8 @@ int board_mmc_init(bd_t *bis) return 0; }
+#if defined(CONFIG_MXC_SPI) + static iomux_v3_cfg_t const tqma6_ecspi1_pads[] = { /* SS1 */ NEW_PAD_CTRL(MX6_PAD_EIM_D19__GPIO3_IO19, SPI_PAD_CTRL), @@ -161,6 +163,8 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs) (cs == CONFIG_SF_DEFAULT_CS)) ? TQMA6_SF_CS_GPIO : -1; }
+#endif /* defined(CONFIG_MXC_SPI) */ + static struct i2c_pads_info tqma6_i2c3_pads = { /* I2C3: on board LM75, M24C64, */ .scl = { @@ -201,7 +205,9 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+#if defined(CONFIG_MXC_SPI) tqma6_iomuxc_spi(); +#endif tqma6_setup_i2c();
tqma6_bb_board_init();