At present this SPI driver works by searching the PCI buses for its peripheral. It also uses the legacy PCI API.
In addition the driver has code to determine the type of Intel PCH that is used (version 7 or version 9). Now that we have proper PCH drivers we can use those to obtain the information we need.
While the device tree has a node for the SPI peripheral it is not in the right place. It should be on the PCI bus as a sub-peripheral of the LPC device.
Update the device tree files to show the SPI controller within the PCH, so that PCI access works as expected.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v2: - Adjust code for earlier commits - Move the SPI base code into the PCH drivers
arch/x86/cpu/coreboot/pci.c | 3 +- arch/x86/cpu/irq.c | 7 +- arch/x86/cpu/ivybridge/bd82x6x.c | 25 ++++++ arch/x86/dts/bayleybay.dts | 160 +++++++++++++++++++----------------- arch/x86/dts/broadwell_som-6896.dts | 23 ++++-- arch/x86/dts/chromebook_link.dts | 5 +- arch/x86/dts/chromebox_panther.dts | 33 ++++---- arch/x86/dts/crownbay.dts | 150 +++++++++++++++++---------------- arch/x86/dts/galileo.dts | 98 +++++++++++----------- arch/x86/dts/minnowmax.dts | 158 ++++++++++++++++++----------------- arch/x86/dts/qemu-x86_i440fx.dts | 26 +++--- arch/x86/dts/qemu-x86_q35.dts | 38 +++++---- drivers/spi/ich.c | 143 ++++++++------------------------ 13 files changed, 435 insertions(+), 434 deletions(-)
diff --git a/arch/x86/cpu/coreboot/pci.c b/arch/x86/cpu/coreboot/pci.c index 41e29a6..7f5087a 100644 --- a/arch/x86/cpu/coreboot/pci.c +++ b/arch/x86/cpu/coreboot/pci.c @@ -14,7 +14,8 @@ #include <pci.h>
static const struct udevice_id generic_pch_ids[] = { - { .compatible = "intel,pch" }, + { .compatible = "intel,pch7" }, + { .compatible = "intel,pch9" }, { } };
diff --git a/arch/x86/cpu/irq.c b/arch/x86/cpu/irq.c index 35b29f6..205405b 100644 --- a/arch/x86/cpu/irq.c +++ b/arch/x86/cpu/irq.c @@ -97,6 +97,7 @@ static int create_pirq_routing_table(void) struct irq_routing_table *rt; struct irq_info *slot, *slot_base; int irq_entries = 0; + int parent; int i; int ret;
@@ -106,7 +107,11 @@ static int create_pirq_routing_table(void) return -EINVAL; }
- ret = fdtdec_get_pci_addr(blob, node, FDT_PCI_SPACE_CONFIG, + /* TODO(sjg@chromium.org): Drop this when PIRQ is a driver */ + parent = fdt_parent_offset(blob, node); + if (parent < 0) + return -EINVAL; + ret = fdtdec_get_pci_addr(blob, parent, FDT_PCI_SPACE_CONFIG, "reg", &addr); if (ret) return ret; diff --git a/arch/x86/cpu/ivybridge/bd82x6x.c b/arch/x86/cpu/ivybridge/bd82x6x.c index 434dfd6..05a21d4 100644 --- a/arch/x86/cpu/ivybridge/bd82x6x.c +++ b/arch/x86/cpu/ivybridge/bd82x6x.c @@ -9,6 +9,7 @@ #include <errno.h> #include <fdtdec.h> #include <malloc.h> +#include <pch.h> #include <asm/lapic.h> #include <asm/pci.h> #include <asm/arch/bd82x6x.h> @@ -96,6 +97,7 @@ static int bd82x6x_probe(struct udevice *dev) return 0; }
+/* TODO(sjg@chromium.org): Move this to the PCH init() method */ int bd82x6x_init(void) { const void *blob = gd->fdt_blob; @@ -116,6 +118,28 @@ int bd82x6x_init(void) return 0; }
+static int bd82x6x_pch_get_sbase(struct udevice *dev, ulong *sbasep) +{ + u32 rcba; + + dm_pci_read_config32(dev, PCH_RCBA, &rcba); + /* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable */ + rcba = rcba & 0xffffc000; + *sbasep = rcba + 0x3800; + + return 0; +} + +static enum pch_version bd82x6x_pch_get_version(struct udevice *dev) +{ + return PCHV_9; +} + +static const struct pch_ops bd82x6x_pch_ops = { + .get_sbase = bd82x6x_pch_get_sbase, + .get_version = bd82x6x_pch_get_version, +}; + static const struct udevice_id bd82x6x_ids[] = { { .compatible = "intel,bd82x6x" }, { } @@ -126,4 +150,5 @@ U_BOOT_DRIVER(bd82x6x_drv) = { .id = UCLASS_PCH, .of_match = bd82x6x_ids, .probe = bd82x6x_probe, + .ops = &bd82x6x_pch_ops, }; diff --git a/arch/x86/dts/bayleybay.dts b/arch/x86/dts/bayleybay.dts index d3380de..87d809b 100644 --- a/arch/x86/dts/bayleybay.dts +++ b/arch/x86/dts/bayleybay.dts @@ -65,23 +65,6 @@ }; };
- spi { - #address-cells = <1>; - #size-cells = <0>; - compatible = "intel,ich-spi"; - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - compatible = "winbond,w25q64dw", "spi-flash"; - memory-map = <0xff800000 0x00800000>; - rw-mrc-cache { - label = "rw-mrc-cache"; - reg = <0x006e0000 0x00010000>; - }; - }; - }; - gpioa { compatible = "intel,ich6-gpio"; u-boot,dm-pre-reloc; @@ -133,66 +116,91 @@ 0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000 0x01000000 0x0 0x2000 0x2000 0 0xe000>;
- irq-router@1f,0 { + pch@1f,0 { reg = <0x0000f800 0 0 0 0>; - compatible = "intel,irq-router"; - intel,pirq-config = "ibase"; - intel,ibase-offset = <0x50>; - intel,pirq-link = <8 8>; - intel,pirq-mask = <0xdee0>; - intel,pirq-routing = < - /* BayTrail PCI devices */ - PCI_BDF(0, 2, 0) INTA PIRQA - PCI_BDF(0, 3, 0) INTA PIRQA - PCI_BDF(0, 16, 0) INTA PIRQA - PCI_BDF(0, 17, 0) INTA PIRQA - PCI_BDF(0, 18, 0) INTA PIRQA - PCI_BDF(0, 19, 0) INTA PIRQA - PCI_BDF(0, 20, 0) INTA PIRQA - PCI_BDF(0, 21, 0) INTA PIRQA - PCI_BDF(0, 22, 0) INTA PIRQA - PCI_BDF(0, 23, 0) INTA PIRQA - PCI_BDF(0, 24, 0) INTA PIRQA - PCI_BDF(0, 24, 1) INTC PIRQC - PCI_BDF(0, 24, 2) INTD PIRQD - PCI_BDF(0, 24, 3) INTB PIRQB - PCI_BDF(0, 24, 4) INTA PIRQA - PCI_BDF(0, 24, 5) INTC PIRQC - PCI_BDF(0, 24, 6) INTD PIRQD - PCI_BDF(0, 24, 7) INTB PIRQB - PCI_BDF(0, 26, 0) INTA PIRQA - PCI_BDF(0, 27, 0) INTA PIRQA - PCI_BDF(0, 28, 0) INTA PIRQA - PCI_BDF(0, 28, 1) INTB PIRQB - PCI_BDF(0, 28, 2) INTC PIRQC - PCI_BDF(0, 28, 3) INTD PIRQD - PCI_BDF(0, 29, 0) INTA PIRQA - PCI_BDF(0, 30, 0) INTA PIRQA - PCI_BDF(0, 30, 1) INTD PIRQD - PCI_BDF(0, 30, 2) INTB PIRQB - PCI_BDF(0, 30, 3) INTC PIRQC - PCI_BDF(0, 30, 4) INTD PIRQD - PCI_BDF(0, 30, 5) INTB PIRQB - PCI_BDF(0, 31, 3) INTB PIRQB - - /* PCIe root ports downstream interrupts */ - PCI_BDF(1, 0, 0) INTA PIRQA - PCI_BDF(1, 0, 0) INTB PIRQB - PCI_BDF(1, 0, 0) INTC PIRQC - PCI_BDF(1, 0, 0) INTD PIRQD - PCI_BDF(2, 0, 0) INTA PIRQB - PCI_BDF(2, 0, 0) INTB PIRQC - PCI_BDF(2, 0, 0) INTC PIRQD - PCI_BDF(2, 0, 0) INTD PIRQA - PCI_BDF(3, 0, 0) INTA PIRQC - PCI_BDF(3, 0, 0) INTB PIRQD - PCI_BDF(3, 0, 0) INTC PIRQA - PCI_BDF(3, 0, 0) INTD PIRQB - PCI_BDF(4, 0, 0) INTA PIRQD - PCI_BDF(4, 0, 0) INTB PIRQA - PCI_BDF(4, 0, 0) INTC PIRQB - PCI_BDF(4, 0, 0) INTD PIRQC - >; + compatible = "intel,pch7"; + + irq-router { + compatible = "intel,irq-router"; + intel,pirq-config = "ibase"; + intel,ibase-offset = <0x50>; + intel,pirq-link = <8 8>; + intel,pirq-mask = <0xdee0>; + intel,pirq-routing = < + /* BayTrail PCI devices */ + PCI_BDF(0, 2, 0) INTA PIRQA + PCI_BDF(0, 3, 0) INTA PIRQA + PCI_BDF(0, 16, 0) INTA PIRQA + PCI_BDF(0, 17, 0) INTA PIRQA + PCI_BDF(0, 18, 0) INTA PIRQA + PCI_BDF(0, 19, 0) INTA PIRQA + PCI_BDF(0, 20, 0) INTA PIRQA + PCI_BDF(0, 21, 0) INTA PIRQA + PCI_BDF(0, 22, 0) INTA PIRQA + PCI_BDF(0, 23, 0) INTA PIRQA + PCI_BDF(0, 24, 0) INTA PIRQA + PCI_BDF(0, 24, 1) INTC PIRQC + PCI_BDF(0, 24, 2) INTD PIRQD + PCI_BDF(0, 24, 3) INTB PIRQB + PCI_BDF(0, 24, 4) INTA PIRQA + PCI_BDF(0, 24, 5) INTC PIRQC + PCI_BDF(0, 24, 6) INTD PIRQD + PCI_BDF(0, 24, 7) INTB PIRQB + PCI_BDF(0, 26, 0) INTA PIRQA + PCI_BDF(0, 27, 0) INTA PIRQA + PCI_BDF(0, 28, 0) INTA PIRQA + PCI_BDF(0, 28, 1) INTB PIRQB + PCI_BDF(0, 28, 2) INTC PIRQC + PCI_BDF(0, 28, 3) INTD PIRQD + PCI_BDF(0, 29, 0) INTA PIRQA + PCI_BDF(0, 30, 0) INTA PIRQA + PCI_BDF(0, 30, 1) INTD PIRQD + PCI_BDF(0, 30, 2) INTB PIRQB + PCI_BDF(0, 30, 3) INTC PIRQC + PCI_BDF(0, 30, 4) INTD PIRQD + PCI_BDF(0, 30, 5) INTB PIRQB + PCI_BDF(0, 31, 3) INTB PIRQB + + /* + * PCIe root ports downstream + * interrupts + */ + PCI_BDF(1, 0, 0) INTA PIRQA + PCI_BDF(1, 0, 0) INTB PIRQB + PCI_BDF(1, 0, 0) INTC PIRQC + PCI_BDF(1, 0, 0) INTD PIRQD + PCI_BDF(2, 0, 0) INTA PIRQB + PCI_BDF(2, 0, 0) INTB PIRQC + PCI_BDF(2, 0, 0) INTC PIRQD + PCI_BDF(2, 0, 0) INTD PIRQA + PCI_BDF(3, 0, 0) INTA PIRQC + PCI_BDF(3, 0, 0) INTB PIRQD + PCI_BDF(3, 0, 0) INTC PIRQA + PCI_BDF(3, 0, 0) INTD PIRQB + PCI_BDF(4, 0, 0) INTA PIRQD + PCI_BDF(4, 0, 0) INTB PIRQA + PCI_BDF(4, 0, 0) INTC PIRQB + PCI_BDF(4, 0, 0) INTD PIRQC + >; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ich-spi"; + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "winbond,w25q64dw", + "spi-flash"; + memory-map = <0xff800000 0x00800000>; + rw-mrc-cache { + label = "rw-mrc-cache"; + reg = <0x006e0000 0x00010000>; + }; + }; + }; }; };
diff --git a/arch/x86/dts/broadwell_som-6896.dts b/arch/x86/dts/broadwell_som-6896.dts index 194f0eb..57a2943 100644 --- a/arch/x86/dts/broadwell_som-6896.dts +++ b/arch/x86/dts/broadwell_som-6896.dts @@ -29,16 +29,21 @@ ranges = <0x02000000 0x0 0xe0000000 0xe0000000 0 0x10000000 0x42000000 0x0 0xd0000000 0xd0000000 0 0x10000000 0x01000000 0x0 0x2000 0x2000 0 0xe000>; - };
- spi { - #address-cells = <1>; - #size-cells = <0>; - compatible = "intel,ich-spi"; - spi-flash@0 { - reg = <0>; - compatible = "winbond,w25q128", "spi-flash"; - memory-map = <0xff000000 0x01000000>; + pch@1f,0 { + reg = <0x0000f800 0 0 0 0>; + compatible = "intel,pch9"; + spi { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ich-spi"; + spi-flash@0 { + reg = <0>; + compatible = "winbond,w25q128", "spi-flash"; + memory-map = <0xff000000 0x01000000>; + }; + }; }; }; + }; diff --git a/arch/x86/dts/chromebook_link.dts b/arch/x86/dts/chromebook_link.dts index c4469a9..a5c5dc1 100644 --- a/arch/x86/dts/chromebook_link.dts +++ b/arch/x86/dts/chromebook_link.dts @@ -186,9 +186,9 @@ intel,pch-backlight = <0x04000000>; };
- pch { + pch@1f,0 { reg = <0x0000f800 0 0 0 0>; - compatible = "intel,bd82x6x", "intel,pch"; + compatible = "intel,bd82x6x", "intel,pch9"; u-boot,dm-pre-reloc; #address-cells = <1>; #size-cells = <1>; @@ -200,6 +200,7 @@ 1 0 0 0 0 0 0 0>; /* Enable EC SMI source */ intel,alt-gp-smi-enable = <0x0100>; + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/x86/dts/chromebox_panther.dts b/arch/x86/dts/chromebox_panther.dts index 4e2b517..bc0c7bb 100644 --- a/arch/x86/dts/chromebox_panther.dts +++ b/arch/x86/dts/chromebox_panther.dts @@ -51,21 +51,26 @@ ranges = <0x02000000 0x0 0xe0000000 0xe0000000 0 0x10000000 0x42000000 0x0 0xd0000000 0xd0000000 0 0x10000000 0x01000000 0x0 0x1000 0x1000 0 0xf000>; - };
- spi { - #address-cells = <1>; - #size-cells = <0>; - compatible = "intel,ich-spi"; - spi-flash@0 { - #size-cells = <1>; - #address-cells = <1>; - reg = <0>; - compatible = "winbond,w25q64", "spi-flash"; - memory-map = <0xff800000 0x00800000>; - rw-mrc-cache { - label = "rw-mrc-cache"; - reg = <0x003e0000 0x00010000>; + pch@1f,0 { + reg = <0x0000f800 0 0 0 0>; + compatible = "intel,pch9"; + spi { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ich-spi"; + spi-flash@0 { + #size-cells = <1>; + #address-cells = <1>; + reg = <0>; + compatible = "winbond,w25q64", + "spi-flash"; + memory-map = <0xff800000 0x00800000>; + rw-mrc-cache { + label = "rw-mrc-cache"; + reg = <0x003e0000 0x00010000>; + }; + }; }; }; }; diff --git a/arch/x86/dts/crownbay.dts b/arch/x86/dts/crownbay.dts index 84231b3..ff739d4 100644 --- a/arch/x86/dts/crownbay.dts +++ b/arch/x86/dts/crownbay.dts @@ -72,17 +72,6 @@ stdout-path = "/serial"; };
- spi { - #address-cells = <1>; - #size-cells = <0>; - compatible = "intel,ich-spi"; - spi-flash@0 { - reg = <0>; - compatible = "sst,25vf016b", "spi-flash"; - memory-map = <0xffe00000 0x00200000>; - }; - }; - microcode { update@0 { #include "microcode/m0220661105_cv.dtsi" @@ -105,6 +94,18 @@ u-boot,dm-pre-reloc; reg = <0x0000b800 0x0 0x0 0x0 0x0>;
+ spi { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ich-spi"; + spi-flash@0 { + reg = <0>; + compatible = "sst,25vf016b", + "spi-flash"; + memory-map = <0xffe00000 0x00200000>; + }; + }; + topcliff@0,0 { #address-cells = <3>; #size-cells = <2>; @@ -170,68 +171,73 @@ }; };
- irq-router@1f,0 { + pch@1f,0 { reg = <0x0000f800 0 0 0 0>; - compatible = "intel,irq-router"; - intel,pirq-config = "pci"; - intel,pirq-link = <0x60 8>; - intel,pirq-mask = <0xcee0>; - intel,pirq-routing = < - /* TunnelCreek PCI devices */ - PCI_BDF(0, 2, 0) INTA PIRQE - PCI_BDF(0, 3, 0) INTA PIRQF - PCI_BDF(0, 23, 0) INTA PIRQA - PCI_BDF(0, 23, 0) INTB PIRQB - PCI_BDF(0, 23, 0) INTC PIRQC - PCI_BDF(0, 23, 0) INTD PIRQD - PCI_BDF(0, 24, 0) INTA PIRQB - PCI_BDF(0, 24, 0) INTB PIRQC - PCI_BDF(0, 24, 0) INTC PIRQD - PCI_BDF(0, 24, 0) INTD PIRQA - PCI_BDF(0, 25, 0) INTA PIRQC - PCI_BDF(0, 25, 0) INTB PIRQD - PCI_BDF(0, 25, 0) INTC PIRQA - PCI_BDF(0, 25, 0) INTD PIRQB - PCI_BDF(0, 26, 0) INTA PIRQD - PCI_BDF(0, 26, 0) INTB PIRQA - PCI_BDF(0, 26, 0) INTC PIRQB - PCI_BDF(0, 26, 0) INTD PIRQC - PCI_BDF(0, 27, 0) INTA PIRQG - /* - * Topcliff PCI devices - * - * Note on the Crown Bay board, Topcliff chipset - * is connected to TunnelCreek PCIe port 0, so - * its bus number is 1 for its PCIe port and 2 - * for its PCI devices per U-Boot current PCI - * bus enumeration algorithm. - */ - PCI_BDF(1, 0, 0) INTA PIRQA - PCI_BDF(2, 0, 1) INTA PIRQA - PCI_BDF(2, 0, 2) INTA PIRQA - PCI_BDF(2, 2, 0) INTB PIRQD - PCI_BDF(2, 2, 1) INTB PIRQD - PCI_BDF(2, 2, 2) INTB PIRQD - PCI_BDF(2, 2, 3) INTB PIRQD - PCI_BDF(2, 2, 4) INTB PIRQD - PCI_BDF(2, 4, 0) INTC PIRQC - PCI_BDF(2, 4, 1) INTC PIRQC - PCI_BDF(2, 6, 0) INTD PIRQB - PCI_BDF(2, 8, 0) INTA PIRQA - PCI_BDF(2, 8, 1) INTA PIRQA - PCI_BDF(2, 8, 2) INTA PIRQA - PCI_BDF(2, 8, 3) INTA PIRQA - PCI_BDF(2, 10, 0) INTB PIRQD - PCI_BDF(2, 10, 1) INTB PIRQD - PCI_BDF(2, 10, 2) INTB PIRQD - PCI_BDF(2, 10, 3) INTB PIRQD - PCI_BDF(2, 10, 4) INTB PIRQD - PCI_BDF(2, 12, 0) INTC PIRQC - PCI_BDF(2, 12, 1) INTC PIRQC - PCI_BDF(2, 12, 2) INTC PIRQC - PCI_BDF(2, 12, 3) INTC PIRQC - PCI_BDF(2, 12, 4) INTC PIRQC - >; + compatible = "intel,pch7"; + + irq-router { + compatible = "intel,irq-router"; + intel,pirq-config = "pci"; + intel,pirq-link = <0x60 8>; + intel,pirq-mask = <0xcee0>; + intel,pirq-routing = < + /* TunnelCreek PCI devices */ + PCI_BDF(0, 2, 0) INTA PIRQE + PCI_BDF(0, 3, 0) INTA PIRQF + PCI_BDF(0, 23, 0) INTA PIRQA + PCI_BDF(0, 23, 0) INTB PIRQB + PCI_BDF(0, 23, 0) INTC PIRQC + PCI_BDF(0, 23, 0) INTD PIRQD + PCI_BDF(0, 24, 0) INTA PIRQB + PCI_BDF(0, 24, 0) INTB PIRQC + PCI_BDF(0, 24, 0) INTC PIRQD + PCI_BDF(0, 24, 0) INTD PIRQA + PCI_BDF(0, 25, 0) INTA PIRQC + PCI_BDF(0, 25, 0) INTB PIRQD + PCI_BDF(0, 25, 0) INTC PIRQA + PCI_BDF(0, 25, 0) INTD PIRQB + PCI_BDF(0, 26, 0) INTA PIRQD + PCI_BDF(0, 26, 0) INTB PIRQA + PCI_BDF(0, 26, 0) INTC PIRQB + PCI_BDF(0, 26, 0) INTD PIRQC + PCI_BDF(0, 27, 0) INTA PIRQG + /* + * Topcliff PCI devices + * + * Note on the Crown Bay board, Topcliff + * chipset is connected to TunnelCreek + * PCIe port 0, so its bus number is 1 + * for its PCIe port and 2 for its PCI + * devices per U-Boot current PCI bus + * enumeration algorithm. + */ + PCI_BDF(1, 0, 0) INTA PIRQA + PCI_BDF(2, 0, 1) INTA PIRQA + PCI_BDF(2, 0, 2) INTA PIRQA + PCI_BDF(2, 2, 0) INTB PIRQD + PCI_BDF(2, 2, 1) INTB PIRQD + PCI_BDF(2, 2, 2) INTB PIRQD + PCI_BDF(2, 2, 3) INTB PIRQD + PCI_BDF(2, 2, 4) INTB PIRQD + PCI_BDF(2, 4, 0) INTC PIRQC + PCI_BDF(2, 4, 1) INTC PIRQC + PCI_BDF(2, 6, 0) INTD PIRQB + PCI_BDF(2, 8, 0) INTA PIRQA + PCI_BDF(2, 8, 1) INTA PIRQA + PCI_BDF(2, 8, 2) INTA PIRQA + PCI_BDF(2, 8, 3) INTA PIRQA + PCI_BDF(2, 10, 0) INTB PIRQD + PCI_BDF(2, 10, 1) INTB PIRQD + PCI_BDF(2, 10, 2) INTB PIRQD + PCI_BDF(2, 10, 3) INTB PIRQD + PCI_BDF(2, 10, 4) INTB PIRQD + PCI_BDF(2, 12, 0) INTC PIRQC + PCI_BDF(2, 12, 1) INTC PIRQC + PCI_BDF(2, 12, 2) INTC PIRQC + PCI_BDF(2, 12, 3) INTC PIRQC + PCI_BDF(2, 12, 4) INTC PIRQC + >; + }; }; };
diff --git a/arch/x86/dts/galileo.dts b/arch/x86/dts/galileo.dts index 55165e1..4eca325 100644 --- a/arch/x86/dts/galileo.dts +++ b/arch/x86/dts/galileo.dts @@ -79,37 +79,58 @@ current-speed = <115200>; };
- irq-router@1f,0 { + pch@1f,0 { reg = <0x0000f800 0 0 0 0>; - compatible = "intel,irq-router"; - intel,pirq-config = "pci"; - intel,pirq-link = <0x60 8>; - intel,pirq-mask = <0xdef8>; - intel,pirq-routing = < - PCI_BDF(0, 20, 0) INTA PIRQE - PCI_BDF(0, 20, 1) INTB PIRQF - PCI_BDF(0, 20, 2) INTC PIRQG - PCI_BDF(0, 20, 3) INTD PIRQH - PCI_BDF(0, 20, 4) INTA PIRQE - PCI_BDF(0, 20, 5) INTB PIRQF - PCI_BDF(0, 20, 6) INTC PIRQG - PCI_BDF(0, 20, 7) INTD PIRQH - PCI_BDF(0, 21, 0) INTA PIRQE - PCI_BDF(0, 21, 1) INTB PIRQF - PCI_BDF(0, 21, 2) INTC PIRQG - PCI_BDF(0, 23, 0) INTA PIRQA - PCI_BDF(0, 23, 1) INTB PIRQB - - /* PCIe root ports downstream interrupts */ - PCI_BDF(1, 0, 0) INTA PIRQA - PCI_BDF(1, 0, 0) INTB PIRQB - PCI_BDF(1, 0, 0) INTC PIRQC - PCI_BDF(1, 0, 0) INTD PIRQD - PCI_BDF(2, 0, 0) INTA PIRQB - PCI_BDF(2, 0, 0) INTB PIRQC - PCI_BDF(2, 0, 0) INTC PIRQD - PCI_BDF(2, 0, 0) INTD PIRQA - >; + + irq-router { + compatible = "intel,irq-router"; + intel,pirq-config = "pci"; + intel,pirq-link = <0x60 8>; + intel,pirq-mask = <0xdef8>; + intel,pirq-routing = < + PCI_BDF(0, 20, 0) INTA PIRQE + PCI_BDF(0, 20, 1) INTB PIRQF + PCI_BDF(0, 20, 2) INTC PIRQG + PCI_BDF(0, 20, 3) INTD PIRQH + PCI_BDF(0, 20, 4) INTA PIRQE + PCI_BDF(0, 20, 5) INTB PIRQF + PCI_BDF(0, 20, 6) INTC PIRQG + PCI_BDF(0, 20, 7) INTD PIRQH + PCI_BDF(0, 21, 0) INTA PIRQE + PCI_BDF(0, 21, 1) INTB PIRQF + PCI_BDF(0, 21, 2) INTC PIRQG + PCI_BDF(0, 23, 0) INTA PIRQA + PCI_BDF(0, 23, 1) INTB PIRQB + + /* PCIe root ports downstream interrupts */ + PCI_BDF(1, 0, 0) INTA PIRQA + PCI_BDF(1, 0, 0) INTB PIRQB + PCI_BDF(1, 0, 0) INTC PIRQC + PCI_BDF(1, 0, 0) INTD PIRQD + PCI_BDF(2, 0, 0) INTA PIRQB + PCI_BDF(2, 0, 0) INTB PIRQC + PCI_BDF(2, 0, 0) INTC PIRQD + PCI_BDF(2, 0, 0) INTD PIRQA + >; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ich-spi"; + spi-flash@0 { + #size-cells = <1>; + #address-cells = <1>; + reg = <0>; + compatible = "winbond,w25q64", + "spi-flash"; + memory-map = <0xff800000 0x00800000>; + rw-mrc-cache { + label = "rw-mrc-cache"; + reg = <0x00010000 0x00010000>; + }; + }; + }; }; };
@@ -127,21 +148,4 @@ bank-name = "B"; };
- spi { - #address-cells = <1>; - #size-cells = <0>; - compatible = "intel,ich-spi"; - spi-flash@0 { - #size-cells = <1>; - #address-cells = <1>; - reg = <0>; - compatible = "winbond,w25q64", "spi-flash"; - memory-map = <0xff800000 0x00800000>; - rw-mrc-cache { - label = "rw-mrc-cache"; - reg = <0x00010000 0x00010000>; - }; - }; - }; - }; diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts index bbfd6d4..e7ef7c9 100644 --- a/arch/x86/dts/minnowmax.dts +++ b/arch/x86/dts/minnowmax.dts @@ -150,66 +150,91 @@ 0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000 0x01000000 0x0 0x2000 0x2000 0 0xe000>;
- irq-router@1f,0 { + pch@1f,0 { reg = <0x0000f800 0 0 0 0>; - compatible = "intel,irq-router"; - intel,pirq-config = "ibase"; - intel,ibase-offset = <0x50>; - intel,pirq-link = <8 8>; - intel,pirq-mask = <0xdee0>; - intel,pirq-routing = < - /* BayTrail PCI devices */ - PCI_BDF(0, 2, 0) INTA PIRQA - PCI_BDF(0, 3, 0) INTA PIRQA - PCI_BDF(0, 16, 0) INTA PIRQA - PCI_BDF(0, 17, 0) INTA PIRQA - PCI_BDF(0, 18, 0) INTA PIRQA - PCI_BDF(0, 19, 0) INTA PIRQA - PCI_BDF(0, 20, 0) INTA PIRQA - PCI_BDF(0, 21, 0) INTA PIRQA - PCI_BDF(0, 22, 0) INTA PIRQA - PCI_BDF(0, 23, 0) INTA PIRQA - PCI_BDF(0, 24, 0) INTA PIRQA - PCI_BDF(0, 24, 1) INTC PIRQC - PCI_BDF(0, 24, 2) INTD PIRQD - PCI_BDF(0, 24, 3) INTB PIRQB - PCI_BDF(0, 24, 4) INTA PIRQA - PCI_BDF(0, 24, 5) INTC PIRQC - PCI_BDF(0, 24, 6) INTD PIRQD - PCI_BDF(0, 24, 7) INTB PIRQB - PCI_BDF(0, 26, 0) INTA PIRQA - PCI_BDF(0, 27, 0) INTA PIRQA - PCI_BDF(0, 28, 0) INTA PIRQA - PCI_BDF(0, 28, 1) INTB PIRQB - PCI_BDF(0, 28, 2) INTC PIRQC - PCI_BDF(0, 28, 3) INTD PIRQD - PCI_BDF(0, 29, 0) INTA PIRQA - PCI_BDF(0, 30, 0) INTA PIRQA - PCI_BDF(0, 30, 1) INTD PIRQD - PCI_BDF(0, 30, 2) INTB PIRQB - PCI_BDF(0, 30, 3) INTC PIRQC - PCI_BDF(0, 30, 4) INTD PIRQD - PCI_BDF(0, 30, 5) INTB PIRQB - PCI_BDF(0, 31, 3) INTB PIRQB + compatible = "pci8086,0f1c", "intel,pch9";
- /* PCIe root ports downstream interrupts */ - PCI_BDF(1, 0, 0) INTA PIRQA - PCI_BDF(1, 0, 0) INTB PIRQB - PCI_BDF(1, 0, 0) INTC PIRQC - PCI_BDF(1, 0, 0) INTD PIRQD - PCI_BDF(2, 0, 0) INTA PIRQB - PCI_BDF(2, 0, 0) INTB PIRQC - PCI_BDF(2, 0, 0) INTC PIRQD - PCI_BDF(2, 0, 0) INTD PIRQA - PCI_BDF(3, 0, 0) INTA PIRQC - PCI_BDF(3, 0, 0) INTB PIRQD - PCI_BDF(3, 0, 0) INTC PIRQA - PCI_BDF(3, 0, 0) INTD PIRQB - PCI_BDF(4, 0, 0) INTA PIRQD - PCI_BDF(4, 0, 0) INTB PIRQA - PCI_BDF(4, 0, 0) INTC PIRQB - PCI_BDF(4, 0, 0) INTD PIRQC - >; + irq-router { + compatible = "intel,irq-router"; + intel,pirq-config = "ibase"; + intel,ibase-offset = <0x50>; + intel,pirq-link = <8 8>; + intel,pirq-mask = <0xdee0>; + intel,pirq-routing = < + /* BayTrail PCI devices */ + PCI_BDF(0, 2, 0) INTA PIRQA + PCI_BDF(0, 3, 0) INTA PIRQA + PCI_BDF(0, 16, 0) INTA PIRQA + PCI_BDF(0, 17, 0) INTA PIRQA + PCI_BDF(0, 18, 0) INTA PIRQA + PCI_BDF(0, 19, 0) INTA PIRQA + PCI_BDF(0, 20, 0) INTA PIRQA + PCI_BDF(0, 21, 0) INTA PIRQA + PCI_BDF(0, 22, 0) INTA PIRQA + PCI_BDF(0, 23, 0) INTA PIRQA + PCI_BDF(0, 24, 0) INTA PIRQA + PCI_BDF(0, 24, 1) INTC PIRQC + PCI_BDF(0, 24, 2) INTD PIRQD + PCI_BDF(0, 24, 3) INTB PIRQB + PCI_BDF(0, 24, 4) INTA PIRQA + PCI_BDF(0, 24, 5) INTC PIRQC + PCI_BDF(0, 24, 6) INTD PIRQD + PCI_BDF(0, 24, 7) INTB PIRQB + PCI_BDF(0, 26, 0) INTA PIRQA + PCI_BDF(0, 27, 0) INTA PIRQA + PCI_BDF(0, 28, 0) INTA PIRQA + PCI_BDF(0, 28, 1) INTB PIRQB + PCI_BDF(0, 28, 2) INTC PIRQC + PCI_BDF(0, 28, 3) INTD PIRQD + PCI_BDF(0, 29, 0) INTA PIRQA + PCI_BDF(0, 30, 0) INTA PIRQA + PCI_BDF(0, 30, 1) INTD PIRQD + PCI_BDF(0, 30, 2) INTB PIRQB + PCI_BDF(0, 30, 3) INTC PIRQC + PCI_BDF(0, 30, 4) INTD PIRQD + PCI_BDF(0, 30, 5) INTB PIRQB + PCI_BDF(0, 31, 3) INTB PIRQB + + /* + * PCIe root ports downstream + * interrupts + */ + PCI_BDF(1, 0, 0) INTA PIRQA + PCI_BDF(1, 0, 0) INTB PIRQB + PCI_BDF(1, 0, 0) INTC PIRQC + PCI_BDF(1, 0, 0) INTD PIRQD + PCI_BDF(2, 0, 0) INTA PIRQB + PCI_BDF(2, 0, 0) INTB PIRQC + PCI_BDF(2, 0, 0) INTC PIRQD + PCI_BDF(2, 0, 0) INTD PIRQA + PCI_BDF(3, 0, 0) INTA PIRQC + PCI_BDF(3, 0, 0) INTB PIRQD + PCI_BDF(3, 0, 0) INTC PIRQA + PCI_BDF(3, 0, 0) INTD PIRQB + PCI_BDF(4, 0, 0) INTA PIRQD + PCI_BDF(4, 0, 0) INTB PIRQA + PCI_BDF(4, 0, 0) INTC PIRQB + PCI_BDF(4, 0, 0) INTD PIRQC + >; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ich-spi"; + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "stmicro,n25q064a", + "spi-flash"; + memory-map = <0xff800000 0x00800000>; + rw-mrc-cache { + label = "rw-mrc-cache"; + reg = <0x006f0000 0x00010000>; + }; + }; + }; }; };
@@ -269,23 +294,6 @@ }; };
- spi { - #address-cells = <1>; - #size-cells = <0>; - compatible = "intel,ich-spi"; - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - compatible = "stmicro,n25q064a", "spi-flash"; - memory-map = <0xff800000 0x00800000>; - rw-mrc-cache { - label = "rw-mrc-cache"; - reg = <0x006f0000 0x00010000>; - }; - }; - }; - microcode { update@0 { #include "microcode/m0130673322.dtsi" diff --git a/arch/x86/dts/qemu-x86_i440fx.dts b/arch/x86/dts/qemu-x86_i440fx.dts index 8a06229..a16875f 100644 --- a/arch/x86/dts/qemu-x86_i440fx.dts +++ b/arch/x86/dts/qemu-x86_i440fx.dts @@ -58,18 +58,22 @@ 0x42000000 0x0 0xd0000000 0xd0000000 0 0x10000000 0x01000000 0x0 0x2000 0x2000 0 0xe000>;
- irq-router@1,0 { + pch@1,0 { reg = <0x00000800 0 0 0 0>; - compatible = "intel,irq-router"; - intel,pirq-config = "pci"; - intel,pirq-link = <0x60 4>; - intel,pirq-mask = <0x0e40>; - intel,pirq-routing = < - /* PIIX UHCI */ - PCI_BDF(0, 1, 2) INTD PIRQD - /* e1000 NIC */ - PCI_BDF(0, 3, 0) INTA PIRQC - >; + compatible = "intel,pch7"; + + irq-router { + compatible = "intel,irq-router"; + intel,pirq-config = "pci"; + intel,pirq-link = <0x60 4>; + intel,pirq-mask = <0x0e40>; + intel,pirq-routing = < + /* PIIX UHCI */ + PCI_BDF(0, 1, 2) INTD PIRQD + /* e1000 NIC */ + PCI_BDF(0, 3, 0) INTA PIRQC + >; + }; }; };
diff --git a/arch/x86/dts/qemu-x86_q35.dts b/arch/x86/dts/qemu-x86_q35.dts index 0b685c8..c00a4a8 100644 --- a/arch/x86/dts/qemu-x86_q35.dts +++ b/arch/x86/dts/qemu-x86_q35.dts @@ -69,24 +69,28 @@ 0x42000000 0x0 0xd0000000 0xd0000000 0 0x10000000 0x01000000 0x0 0x2000 0x2000 0 0xe000>;
- irq-router@1f,0 { + pch@1f,0 { reg = <0x0000f800 0 0 0 0>; - compatible = "intel,irq-router"; - intel,pirq-config = "pci"; - intel,pirq-link = <0x60 8>; - intel,pirq-mask = <0x0e40>; - intel,pirq-routing = < - /* e1000 NIC */ - PCI_BDF(0, 2, 0) INTA PIRQG - /* ICH9 UHCI */ - PCI_BDF(0, 29, 0) INTA PIRQA - PCI_BDF(0, 29, 1) INTB PIRQB - PCI_BDF(0, 29, 2) INTC PIRQC - /* ICH9 EHCI */ - PCI_BDF(0, 29, 7) INTD PIRQD - /* ICH9 SATA */ - PCI_BDF(0, 31, 2) INTA PIRQA - >; + compatible = "intel,pch7"; + + irq-router { + compatible = "intel,irq-router"; + intel,pirq-config = "pci"; + intel,pirq-link = <0x60 8>; + intel,pirq-mask = <0x0e40>; + intel,pirq-routing = < + /* e1000 NIC */ + PCI_BDF(0, 2, 0) INTA PIRQG + /* ICH9 UHCI */ + PCI_BDF(0, 29, 0) INTA PIRQA + PCI_BDF(0, 29, 1) INTB PIRQB + PCI_BDF(0, 29, 2) INTC PIRQC + /* ICH9 EHCI */ + PCI_BDF(0, 29, 7) INTD PIRQD + /* ICH9 SATA */ + PCI_BDF(0, 31, 2) INTA PIRQA + >; + }; }; };
diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c index f85af9c..7f83509 100644 --- a/drivers/spi/ich.c +++ b/drivers/spi/ich.c @@ -10,9 +10,10 @@ #include <dm.h> #include <errno.h> #include <malloc.h> -#include <spi.h> +#include <pch.h> #include <pci.h> #include <pci_ids.h> +#include <spi.h> #include <asm/io.h>
#include "ich.h" @@ -21,9 +22,7 @@ #define SPI_OPCODE_FAST_READ 0x0b
struct ich_spi_platdata { - pci_dev_t dev; /* PCI device number */ - int ich_version; /* Controller version, 7 or 9 */ - bool use_sbase; /* Use SBASE instead of RCB */ + enum pch_version ich_version; /* Controller version, 7 or 9 */ };
struct ich_spi_priv { @@ -116,40 +115,16 @@ static void ich_set_bbar(struct ich_spi_priv *ctlr, uint32_t minaddr) ich_writel(ctlr, ichspi_bbar, ctlr->bbar); }
-/* - * Check if this device ID matches one of supported Intel PCH devices. - * - * Return the ICH version if there is a match, or zero otherwise. - */ -static int get_ich_version(uint16_t device_id) -{ - if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC || - device_id == PCI_DEVICE_ID_INTEL_ITC_LPC || - device_id == PCI_DEVICE_ID_INTEL_QRK_ILB) - return 7; - - if ((device_id >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN && - device_id <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX) || - (device_id >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN && - device_id <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX) || - device_id == PCI_DEVICE_ID_INTEL_VALLEYVIEW_LPC || - device_id == PCI_DEVICE_ID_INTEL_LYNXPOINT_LPC || - device_id == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LPC) - return 9; - - return 0; -} - /* @return 1 if the SPI flash supports the 33MHz speed */ -static int ich9_can_do_33mhz(pci_dev_t dev) +static int ich9_can_do_33mhz(struct udevice *dev) { u32 fdod, speed;
/* Observe SPI Descriptor Component Section 0 */ - pci_write_config_dword(dev, 0xb0, 0x1000); + dm_pci_write_config32(dev->parent, 0xb0, 0x1000);
/* Extract the Write/Erase SPI Frequency from descriptor */ - pci_read_config_dword(dev, 0xb4, &fdod); + dm_pci_read_config32(dev->parent, 0xb4, &fdod);
/* Bits 23:21 have the fast read clock frequency, 0=20MHz, 1=33MHz */ speed = (fdod >> 21) & 7; @@ -157,59 +132,22 @@ static int ich9_can_do_33mhz(pci_dev_t dev) return speed == 1; }
-static int ich_find_spi_controller(struct ich_spi_platdata *ich) -{ - int last_bus = pci_last_busno(); - int bus; - - if (last_bus == -1) { - debug("No PCI busses?\n"); - return -ENODEV; - } - - for (bus = 0; bus <= last_bus; bus++) { - uint16_t vendor_id, device_id; - uint32_t ids; - pci_dev_t dev; - - dev = PCI_BDF(bus, 31, 0); - pci_read_config_dword(dev, 0, &ids); - vendor_id = ids; - device_id = ids >> 16; - - if (vendor_id == PCI_VENDOR_ID_INTEL) { - ich->dev = dev; - ich->ich_version = get_ich_version(device_id); - if (device_id == PCI_DEVICE_ID_INTEL_VALLEYVIEW_LPC) - ich->use_sbase = true; - return ich->ich_version == 0 ? -ENODEV : 0; - } - } - - debug("ICH SPI: No ICH found.\n"); - return -ENODEV; -} - -static int ich_init_controller(struct ich_spi_platdata *plat, +static int ich_init_controller(struct udevice *dev, + struct ich_spi_platdata *plat, struct ich_spi_priv *ctlr) { - uint8_t *rcrb; /* Root Complex Register Block */ - uint32_t rcba; /* Root Complex Base Address */ - uint32_t sbase_addr; - uint8_t *sbase; - - pci_read_config_dword(plat->dev, 0xf0, &rcba); - /* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */ - rcrb = (uint8_t *)(rcba & 0xffffc000); + ulong sbase_addr; + void *sbase;
/* SBASE is similar */ - pci_read_config_dword(plat->dev, 0x54, &sbase_addr); - sbase = (uint8_t *)(sbase_addr & 0xfffffe00); + pch_get_sbase(dev->parent, &sbase_addr); + sbase = (void *)sbase_addr; + debug("%s: sbase=%p\n", __func__, sbase);
- if (plat->ich_version == 7) { - struct ich7_spi_regs *ich7_spi; + if (plat->ich_version == PCHV_7) { + struct ich7_spi_regs *ich7_spi = sbase;
- ich7_spi = (struct ich7_spi_regs *)(rcrb + 0x3020); + ich7_spi = (struct ich7_spi_regs *)sbase; ctlr->ichspi_lock = readw(&ich7_spi->spis) & SPIS_LOCK; ctlr->opmenu = offsetof(struct ich7_spi_regs, opmenu); ctlr->menubytes = sizeof(ich7_spi->opmenu); @@ -222,13 +160,9 @@ static int ich_init_controller(struct ich_spi_platdata *plat, ctlr->bbar = offsetof(struct ich7_spi_regs, bbar); ctlr->preop = offsetof(struct ich7_spi_regs, preop); ctlr->base = ich7_spi; - } else if (plat->ich_version == 9) { - struct ich9_spi_regs *ich9_spi; + } else if (plat->ich_version == PCHV_9) { + struct ich9_spi_regs *ich9_spi = sbase;
- if (plat->use_sbase) - ich9_spi = (struct ich9_spi_regs *)sbase; - else - ich9_spi = (struct ich9_spi_regs *)(rcrb + 0x3800); ctlr->ichspi_lock = readw(&ich9_spi->hsfs) & HSFS_FLOCKDN; ctlr->opmenu = offsetof(struct ich9_spi_regs, opmenu); ctlr->menubytes = sizeof(ich9_spi->opmenu); @@ -252,9 +186,9 @@ static int ich_init_controller(struct ich_spi_platdata *plat,
/* Work out the maximum speed we can support */ ctlr->max_speed = 20000000; - if (plat->ich_version == 9 && ich9_can_do_33mhz(plat->dev)) + if (plat->ich_version == PCHV_9 && ich9_can_do_33mhz(dev)) ctlr->max_speed = 33000000; - debug("ICH SPI: Version %d detected at %p, speed %ld\n", + debug("ICH SPI: Version ID %d detected at %p, speed %ld\n", plat->ich_version, ctlr->base, ctlr->max_speed);
ich_set_bbar(ctlr, 0); @@ -481,7 +415,7 @@ static int ich_spi_xfer(struct udevice *dev, unsigned int bitlen, if (ret < 0) return ret;
- if (plat->ich_version == 7) + if (plat->ich_version == PCHV_7) ich_writew(ctlr, SPIS_CDS | SPIS_FCERR, ctlr->status); else ich_writeb(ctlr, SPIS_CDS | SPIS_FCERR, ctlr->status); @@ -676,30 +610,34 @@ int spi_write_protect_region(struct udevice *dev, uint32_t lower_limit, return 0; }
-static int ich_spi_probe(struct udevice *bus) +static int ich_spi_probe(struct udevice *dev) { - struct ich_spi_platdata *plat = dev_get_platdata(bus); - struct ich_spi_priv *priv = dev_get_priv(bus); + struct ich_spi_platdata *plat = dev_get_platdata(dev); + struct ich_spi_priv *priv = dev_get_priv(dev); uint8_t bios_cntl; + ulong sbase_addr; int ret;
- ret = ich_init_controller(plat, priv); + /* Check the ICH version */ + plat->ich_version = pch_get_version(dev->parent); + + ret = ich_init_controller(dev, plat, priv); if (ret) return ret; /* * Disable the BIOS write protect so write commands are allowed. On * v9, deassert SMM BIOS Write Protect Disable. */ - if (plat->use_sbase) { + if (!pch_get_sbase(dev->parent, &sbase_addr)) { bios_cntl = ich_readb(priv, priv->bcr); bios_cntl &= ~BIT(5); /* clear Enable InSMM_STS (EISS) */ bios_cntl |= 1; /* Write Protect Disable (WPD) */ ich_writeb(priv, bios_cntl, priv->bcr); } else { - pci_read_config_byte(plat->dev, 0xdc, &bios_cntl); - if (plat->ich_version == 9) + dm_pci_read_config8(dev->parent, 0xdc, &bios_cntl); + if (plat->ich_version == PCHV_9) bios_cntl &= ~BIT(5); - pci_write_config_byte(plat->dev, 0xdc, bios_cntl | 0x1); + dm_pci_write_config8(dev->parent, 0xdc, bios_cntl | 0x1); }
priv->cur_speed = priv->max_speed; @@ -707,18 +645,6 @@ static int ich_spi_probe(struct udevice *bus) return 0; }
-static int ich_spi_ofdata_to_platdata(struct udevice *bus) -{ - struct ich_spi_platdata *plat = dev_get_platdata(bus); - int ret; - - ret = ich_find_spi_controller(plat); - if (ret) - return ret; - - return 0; -} - static int ich_spi_set_speed(struct udevice *bus, uint speed) { struct ich_spi_priv *priv = dev_get_priv(bus); @@ -751,7 +677,7 @@ static int ich_spi_child_pre_probe(struct udevice *dev) * ICH 7 SPI controller only supports array read command * and byte program command for SST flash */ - if (plat->ich_version == 7) { + if (plat->ich_version == PCHV_7) { slave->op_mode_rx = SPI_OPM_RX_AS; slave->op_mode_tx = SPI_OPM_TX_BP; } @@ -779,7 +705,6 @@ U_BOOT_DRIVER(ich_spi) = { .id = UCLASS_SPI, .of_match = ich_spi_ids, .ops = &ich_spi_ops, - .ofdata_to_platdata = ich_spi_ofdata_to_platdata, .platdata_auto_alloc_size = sizeof(struct ich_spi_platdata), .priv_auto_alloc_size = sizeof(struct ich_spi_priv), .child_pre_probe = ich_spi_child_pre_probe,