Prafulla,
Thanks for the input! I assume the SPI flash implementation looked ok?
On Mon, Jun 06, 2011 at 11:47:15PM -0700, Prafulla Wadaskar wrote:
-----Original Message----- From: u-boot@lakedaemon.net [mailto:u-boot@lakedaemon.net] Sent: Monday, June 06, 2011 6:04 PM To: u-boot@lists.denx.de Cc: Prafulla Wadaskar; Jason Cooper Subject: [PATCH 0/3 v2] RFC: Dreamplug support
3.) I added the board number [2], etc to asm/mach-types.h even though it says to not to. ;-) Is there a proper way to do it? If it's copied from the Linux kernel, it hasn't been updated in a while...
No, the proper way is- you should add board first to arm-linux, then the updated mach-types.h will be updated by arm maintainer on u-boot, then you can add your board support.
Ok, I'll starting working on the Linux side as well.
[2] http://www.arm.linux.org.uk/developer/machines/list.php?id=3550
Changes from v1 to v2:
- resorted series to move 'make all' support last.
Jason Cooper (3): dreamplug: Initial support. dreamplug: switch from NAND flash to SPI flash. dreamplug: include in 'make all'
MAKEALL | 1 + arch/arm/include/asm/mach-types.h | 13 +++
No patch for this file, follow process explained above.
So, in the interim, I'll resubmit using the guruplug board id, then submit separate patch after the Linux support is accepted.
board/Marvell/dreamplug/Makefile | 51 +++++++++++ board/Marvell/dreamplug/dreamplug.c | 153 ++++++++++++++++++++++++++++++++ board/Marvell/dreamplug/dreamplug.h | 39 ++++++++ board/Marvell/dreamplug/kwbimage.cfg | 160 ++++++++++++++++++++++++++++++++++ boards.cfg | 1 + include/configs/dreamplug.h | 111 +++++++++++++++++++++++
You should update MAINTAINERS file too.
Ok, I'll add Dreamplug under Siddarth Gore.
Regards.. Prafulla . .