On Mon, Oct 3, 2022 at 9:02 AM Fabio Estevam festevam@denx.de wrote:
When the imx8mn.dtsi file was pulled in from Linux, the UARTs were moved into an spba sub-node which wasn't being included in the SPL device tree. This meant the references to the UART weren't being handled properly and when booting the system would constantly reboot. Fix this by adding the spba node to the spl device tree to restore normal booting.
Based on the patch from Adam Ford for the imx8mn-beacon-kit-u-boot board.
Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux") Signed-off-by: Fabio Estevam festevam@denx.de
Changes since v1:
- Fix typo in commit log: imx8mm.dtsi--> imx8mn.dtsi
Hi Tom and Stefano,
I know today is release day. Could this one be applied directly?
I have a series to push this fix into a common imx8mn-u-boot.dtsi file [1]. Theoretically, pulling in that series should fix all the 8mn's.
[1] - https://patchwork.ozlabs.org/project/uboot/list/?series=312016
adam
It fixes a boot regression.
Thanks
arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi index 78773c198e..3a9ba8b8c9 100644 --- a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi @@ -26,6 +26,10 @@ u-boot,dm-spl; };
+&spba1 {
u-boot,dm-spl;+};
&clk { u-boot,dm-spl; u-boot,dm-pre-reloc; -- 2.25.1