Hi everyone,
I managed to get SDP protocol to work with on my custom i.MX6 board, so big thanks to Stefan for your work!
I'm now trying to load swupdate ramdisk with u-boot sdp command, without success. Is it a possible use case ?
Here my steps:
In u-boot: => sdp 0
On Host, $ imx_usb
config file <C:\Users\vpr\IMXUSBLOADER2\delivery\imx_usb.conf> vid=0x15a2 pid=0x0061 file_name=mx6_usb_rom.conf -> vid=0x0525 pid=0xb4a4 file_name=mx6_usb_sdp_spl.conf vid=0x0525 pid=0xa4a5 file_name=mx6_usb_uboot.conf config file <C:\Users\vpr\IMXUSBLOADER2\delivery\mx6_usb_uboot.conf> parse C:\Users\vpr\IMXUSBLOADER2\delivery\mx6_usb_uboot.conf Trying to open device vid=0x0525 pid=0xa4a5......................... Could not open device vid=0x0525 pid=0xa4a5
VID/PID in imx_usb.conf are correctly detected, and correct configuration file is launched (mx6_usb_uboot.conf), it contains:
mx6_usb_sdp_uboot hid,1024,0x10000000,1G,0x00907000,0x31000 test.txt:load 0x12100000
My imx_usb.conf is the following:
#vid:pid, config_file 0x15a2:0x0061, mx6_usb_rom.conf, 0x0525:0xb4a4, mx6_usb_sdp_spl.conf 0x0525:0xa4a5, mx6_usb_uboot.conf
Am I missing something, Thanks, Vincent
2017-09-01 22:09 GMT+02:00 Stefan Agner stefan@agner.ch:
On September 1, 2017 12:25:44 PM PDT, Fabio Estevam festevam@gmail.com wrote:
On Fri, Sep 1, 2017 at 3:54 PM, Fabio Estevam festevam@gmail.com wrote:
I have tested this method and it works, thanks.
Do you plan to usptream this method?
Or I can also put your patch as part of my series that adds SDP support for imx6qsabresd if you prefer.
Let me do a separate, I guess it could be controversial...
-- Stefan -- Sent from my Android device with K-9 Mail. Please excuse my brevity. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot