In order to pass component addresses around easily instead of passing ad-hoc sequence numbers, it is necessary to split ehci_mx6_common_init(). Make it so and call the separate functions instead.
Since board_ehci_hcd_init() makes no sense in DM case, do not call it in DM case.
Fixes: 4de51cc25b5 ("usb: ehci-mx6: Drop assignment of sequence number") Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de Cc: Ye Li ye.li@nxp.com Cc: uboot-imx uboot-imx@nxp.com --- drivers/usb/host/ehci-mx6.c | 58 ++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 29 deletions(-)
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 008dca9bae7..b195ba4c89b 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -283,6 +283,7 @@ static void usb_oc_config(int index) #endif }
+#if !CONFIG_IS_ENABLED(DM_USB) /** * board_usb_phy_mode - override usb phy mode * @port: usb host/otg port @@ -329,27 +330,6 @@ int __weak board_ehci_power(int port, int on) return 0; }
-int ehci_mx6_common_init(struct usb_ehci *ehci, int index) -{ - int ret; - - /* Do board specific initialization */ - ret = board_ehci_hcd_init(index); - if (ret) - return ret; - - usb_power_config(index); - usb_oc_config(index); - -#if defined(CONFIG_MX6) || defined(CONFIG_MX7ULP) - usb_internal_phy_clock_gate(index, 1); - usb_phy_enable(index, ehci); -#endif - - return 0; -} - -#if !CONFIG_IS_ENABLED(DM_USB) int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { @@ -377,9 +357,20 @@ int ehci_hcd_init(int index, enum usb_init_type init, enable_usboh3_clk(1); mdelay(1);
- ret = ehci_mx6_common_init(ehci, index); - if (ret) + /* Do board specific initialization */ + ret = board_ehci_hcd_init(index); + if (ret) { + enable_usboh3_clk(0); return ret; + } + + usb_power_config(index); + usb_oc_config(index); + +#if defined(CONFIG_MX6) || defined(CONFIG_MX7ULP) + usb_internal_phy_clock_gate(index, 1); + usb_phy_enable(index, ehci); +#endif
type = board_usb_phy_mode(index);
@@ -432,9 +423,13 @@ static int mx6_init_after_reset(struct ehci_ctrl *dev) struct usb_ehci *ehci = priv->ehci; int ret;
- ret = ehci_mx6_common_init(priv->ehci, priv->portnr); - if (ret) - return ret; + usb_power_config(priv->portnr); + usb_oc_config(priv->portnr); + +#if defined(CONFIG_MX6) || defined(CONFIG_MX7ULP) + usb_internal_phy_clock_gate(priv->portnr, 1); + usb_phy_enable(priv->portnr, ehci); +#endif
#if CONFIG_IS_ENABLED(DM_REGULATOR) if (priv->vbus_supply) { @@ -672,9 +667,14 @@ static int ehci_usb_probe(struct udevice *dev) if (ret) debug("%s: No vbus supply\n", dev->name); #endif - ret = ehci_mx6_common_init(ehci, priv->portnr); - if (ret) - goto err_clk; + + usb_power_config(priv->portnr); + usb_oc_config(priv->portnr); + +#if defined(CONFIG_MX6) || defined(CONFIG_MX7ULP) + usb_internal_phy_clock_gate(priv->portnr, 1); + usb_phy_enable(priv->portnr, ehci); +#endif
#if CONFIG_IS_ENABLED(DM_REGULATOR) if (priv->vbus_supply) {