From: David Feng fenghua@phytium.com.cn
Changes for v13: - fix the bug of board_r.c and arm/lib/board.c due to CONFIG_NEED_MANUAL_RELOC. adjust initr_serial() in board_r.c to the first entry of init_sequence_r[] and relocate serial_initialize() in arm/lib/board.c, routines of serial_device should be relocated firstly by serial_initialize(), so that printf access the correct puts function, otherwise uninitialized serial_current will be selected as the output device. - fix the bug of dcache_enable(). after mmu_setup the sctrl register value should be fetched again because it has been modifed by mmu_seup() function. This bug is find by York Sun yorksun@freescale.com. - add macro branch_if_slave to macro.h, it choose processor with all zero affinity value as the master and is used in start.S.
Changes for v12: - custom the patches to new format boards.cfg.
Changes for v11: - Replace CONFIG_ARMV8 with CONFIG_ARM64. Currently, it's hard to distinguish what is armv8 specific and what is aarch64 specific, so we use CONFIG_ARM64 only, no CONFIG_ARMV8 used. - rename README.armv8 with README.arm64 and make some modification.
Changes for v10: - add weak definition to include/linux/linkage.h and make setup_el2/setup_el3/lowlevel_init weak routines, so them can be easily overridden by processor specific code. - modify s-o-f of 0002-board-support-of-vexpress_aemv8a which use wrong mail address of Bhupesh Sharma.
Changes for v9: - add Signed-off-by information to patch "board support of vexpress_aemv8a" which SMC91111 support is integrated from Sharma Bhupesh's patch. - adjust pt_regs struct and add exception state preservation in exception.S.
Changes for v8: - Integrate SMC91111 patch of sharma bhupesh. - remove v8_outer_cache* which is not need currently. - Change license tag. - Mov crt0.S/relocate.S/interrupts.c to arm/lib and rename them with _64 suffix. - Make el3/el2 initializing process of start.S as two separate routines. It could be easier to be replaced with processor specific codes. - Remove exception stack save and restore routine, it is unnecessary now. - simplify __weak function declaration.
Changes for v7: - Check the patches with checkpatch.pl and get rid of almost all warnings. There are a few warnings still, but I think it should be that. - change printf format in cmd_pxe.c, use %zd indtead of %ld to format size_t type variable. - add macro PGTABLE_SIZE to identify tlb table size.
Changes for v6: - Make modification to inappropriate licensed file and bugs according to ScottWood's advice. Thanks Scott for his checking to these patches. - Enable u-boot's running at EL1. - Get rid of compiling warnings originated from cmd_pxe.c.
Changes for v5: - fix the generic board_f.c, remove zero_global_data from init_sequence_f array and move it to board_init_f() function with CONFIG_X86 switch. The previous fixup is inaccurate. - Replace __ARMEB__ with __AARCH64EB__ in byteorder.h and unaligned.h, gcc for aarch64 use __AARCH64EB__ and __AARCH64EL__ to identify endian. - Some modification to README.armv8
Changes for v4: - merge arm64 to arm architecture.
David Feng (6): core support of arm64 board support of vexpress_aemv8a generic board patch of manual reloc and zero gd_t 64bit initrd start address support remove compiling warnings add weak entry definition
arch/arm/config.mk | 4 + arch/arm/cpu/armv8/Makefile | 38 +++ arch/arm/cpu/armv8/cache.S | 130 +++++++++ arch/arm/cpu/armv8/cache_v8.c | 218 +++++++++++++++ arch/arm/cpu/armv8/config.mk | 16 ++ arch/arm/cpu/armv8/cpu.c | 67 +++++ arch/arm/cpu/armv8/exceptions.S | 115 ++++++++ arch/arm/cpu/armv8/start.S | 234 ++++++++++++++++ arch/arm/cpu/armv8/timer.c | 80 ++++++ arch/arm/cpu/armv8/tlb.S | 30 +++ arch/arm/cpu/armv8/u-boot.lds | 71 +++++ arch/arm/include/asm/arch-armv8/gpio.h | 11 + arch/arm/include/asm/arch-armv8/mmu.h | 110 ++++++++ arch/arm/include/asm/byteorder.h | 12 + arch/arm/include/asm/cache.h | 5 + arch/arm/include/asm/config.h | 10 + arch/arm/include/asm/global_data.h | 6 +- arch/arm/include/asm/io.h | 15 +- arch/arm/include/asm/macro.h | 39 +++ arch/arm/include/asm/posix_types.h | 10 + arch/arm/include/asm/proc-armv/ptrace.h | 21 ++ arch/arm/include/asm/proc-armv/system.h | 59 ++++- arch/arm/include/asm/system.h | 77 ++++++ arch/arm/include/asm/types.h | 4 + arch/arm/include/asm/u-boot.h | 4 + arch/arm/include/asm/unaligned.h | 2 +- arch/arm/lib/Makefile | 14 + arch/arm/lib/board.c | 25 +- arch/arm/lib/bootm.c | 16 ++ arch/arm/lib/crt0_64.S | 116 ++++++++ arch/arm/lib/interrupts_64.c | 120 +++++++++ arch/arm/lib/relocate_64.S | 57 ++++ board/armltd/dts/vexpress64.dts | 439 +++++++++++++++++++++++++++++++ board/armltd/vexpress64/Makefile | 27 ++ board/armltd/vexpress64/vexpress64.c | 70 +++++ boards.cfg | 1 + common/board_f.c | 18 +- common/board_r.c | 20 +- common/cmd_pxe.c | 4 +- common/fdt_support.c | 66 ++--- common/image.c | 1 + doc/README.arm64 | 33 +++ examples/standalone/stubs.c | 15 ++ include/configs/vexpress_aemv8a.h | 191 ++++++++++++++ include/image.h | 1 + include/linux/linkage.h | 4 + 46 files changed, 2573 insertions(+), 53 deletions(-) create mode 100644 arch/arm/cpu/armv8/Makefile create mode 100644 arch/arm/cpu/armv8/cache.S create mode 100644 arch/arm/cpu/armv8/cache_v8.c create mode 100644 arch/arm/cpu/armv8/config.mk create mode 100644 arch/arm/cpu/armv8/cpu.c create mode 100644 arch/arm/cpu/armv8/exceptions.S create mode 100644 arch/arm/cpu/armv8/start.S create mode 100644 arch/arm/cpu/armv8/timer.c create mode 100644 arch/arm/cpu/armv8/tlb.S create mode 100644 arch/arm/cpu/armv8/u-boot.lds create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h create mode 100644 arch/arm/lib/crt0_64.S create mode 100644 arch/arm/lib/interrupts_64.c create mode 100644 arch/arm/lib/relocate_64.S create mode 100644 board/armltd/dts/vexpress64.dts create mode 100644 board/armltd/vexpress64/Makefile create mode 100644 board/armltd/vexpress64/vexpress64.c create mode 100644 doc/README.arm64 create mode 100644 include/configs/vexpress_aemv8a.h