With the move to driver model usage, ensure that the required driver support for SPI and MMC booting is available in SPL.
Tested on SolidRun ClearFog devices.
Signed-off-by: Joel Johnson mrjoel@lixil.net ---
v2 changes: - change "select" for ENV_IS_IN_X to "imply" to allow disabling the default env location and configuring a different one if desired - remove SPL_DM_GPIO from defconfig, only include if needed for MMC booting v3 changes: - none v4 changes: - none v5 changes: - none
--- arch/arm/mach-mvebu/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 161dee937f..32191e7157 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -235,9 +235,19 @@ choice
config MVEBU_SPL_BOOT_DEVICE_SPI bool "SPI NOR flash" + imply ENV_IS_IN_SPI_FLASH + select SPL_DM_SPI + select SPL_MTD_SUPPORT + select SPL_SPI_FLASH_SUPPORT + select SPL_SPI_LOAD + select SPL_SPI_SUPPORT
config MVEBU_SPL_BOOT_DEVICE_MMC bool "SDIO/MMC card" + imply ENV_IS_IN_MMC + # GPIO required for SD card presence detection line + select SPL_DM_GPIO + select SPL_DM_MMC select SPL_LIBDISK_SUPPORT
config MVEBU_SPL_BOOT_DEVICE_SATA