From: Vikas Gupta vikas.gupta@broadcom.com
Add optee based bnxt fw load driver. bnxt is Broadcom NetXtreme controller Ethernet card. This driver is used to load bnxt firmware binary using OpTEE.
Signed-off-by: Vikas Gupta vikas.gupta@broadcom.com Signed-off-by: Rayagonda Kokatanur rayagonda.kokatanur@broadcom.com --- Changes from v2: -Address review comments from Simon, Remove own return code and use standard error code. Take out common lines from different functions and move them into common static function. Remove include <common.h> as its not required. Move functions with printf from header file into c file.
drivers/tee/Kconfig | 1 + drivers/tee/Makefile | 1 + drivers/tee/broadcom/Kconfig | 7 ++ drivers/tee/broadcom/Makefile | 3 + drivers/tee/broadcom/chimp_optee.c | 182 +++++++++++++++++++++++++++++ include/broadcom/chimp.h | 16 +++ 6 files changed, 210 insertions(+) create mode 100644 drivers/tee/broadcom/Kconfig create mode 100644 drivers/tee/broadcom/Makefile create mode 100644 drivers/tee/broadcom/chimp_optee.c create mode 100644 include/broadcom/chimp.h
diff --git a/drivers/tee/Kconfig b/drivers/tee/Kconfig index 5c0c89043f..5ca5a0836c 100644 --- a/drivers/tee/Kconfig +++ b/drivers/tee/Kconfig @@ -29,6 +29,7 @@ config SANDBOX_TEE "avb" commands.
source "drivers/tee/optee/Kconfig" +source "drivers/tee/broadcom/Kconfig"
endmenu
diff --git a/drivers/tee/Makefile b/drivers/tee/Makefile index f72c68c09f..5c8ffdbce8 100644 --- a/drivers/tee/Makefile +++ b/drivers/tee/Makefile @@ -3,3 +3,4 @@ obj-y += tee-uclass.o obj-$(CONFIG_SANDBOX) += sandbox.o obj-$(CONFIG_OPTEE) += optee/ +obj-y += broadcom/ diff --git a/drivers/tee/broadcom/Kconfig b/drivers/tee/broadcom/Kconfig new file mode 100644 index 0000000000..ce95072d4e --- /dev/null +++ b/drivers/tee/broadcom/Kconfig @@ -0,0 +1,7 @@ +config CHIMP_OPTEE + bool "Enable secure ChiMP firmware loading" + depends on OPTEE + default y + help + This driver is used to load bnxt firmware binary using OpTEE. + bnxt is Broadcom NetXtreme controller Ethernet card. diff --git a/drivers/tee/broadcom/Makefile b/drivers/tee/broadcom/Makefile new file mode 100644 index 0000000000..cb3cef16df --- /dev/null +++ b/drivers/tee/broadcom/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y += chimp_optee.o diff --git a/drivers/tee/broadcom/chimp_optee.c b/drivers/tee/broadcom/chimp_optee.c new file mode 100644 index 0000000000..4ca1b59c6a --- /dev/null +++ b/drivers/tee/broadcom/chimp_optee.c @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: BSD-2-Clause +/* + * Copyright 2020 Broadcom. + */ + +#include <common.h> +#include <tee.h> +#include <broadcom/chimp.h> + +#ifdef CONFIG_CHIMP_OPTEE + +#define CHMIP_BOOT_UUID { 0x6272636D, 0x2019, 0x0716, \ + { 0x42, 0x43, 0x4D, 0x5F, 0x53, 0x43, 0x48, 0x49 } } + +enum { + TEE_CHIMP_FASTBOOT = 0, + TEE_CHIMP_HEALTH_STATUS, + TEE_CHIMP_HANDSHAKE_STATUS, +} tee_chmip_cmd; + +struct bcm_chimp_data { + struct udevice *tee; + u32 session; +} chimp_data; + +static int get_open_session(struct bcm_chimp_data *b_data) +{ + struct udevice *tee = NULL; + + while (!b_data->tee) { + const struct tee_optee_ta_uuid uuid = CHMIP_BOOT_UUID; + struct tee_open_session_arg arg; + int rc; + + tee = tee_find_device(tee, NULL, NULL, NULL); + if (!tee) + return -ENODEV; + + memset(&arg, 0, sizeof(arg)); + tee_optee_ta_uuid_to_octets(arg.uuid, &uuid); + rc = tee_open_session(tee, &arg, 0, NULL); + if (!rc) { + b_data->tee = tee; + b_data->session = arg.session; + } + } + + return 0; +} + +static int init_arg(struct tee_invoke_arg *arg, u32 func) +{ + if (get_open_session(&chimp_data)) + return -EINVAL; + + memset(arg, 0, sizeof(struct tee_invoke_arg)); + arg->func = func; + arg->session = chimp_data.session; + + return 0; +} + +int chimp_handshake_status_optee(u32 timeout, u32 *hs) +{ + struct tee_invoke_arg arg; + struct tee_param param[1]; + int ret; + + ret = init_arg(&arg, TEE_CHIMP_HANDSHAKE_STATUS); + if (ret < 0) + return ret; + + param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_INOUT; + param[0].u.value.a = timeout; + + ret = tee_invoke_func(chimp_data.tee, &arg, ARRAY_SIZE(param), param); + if (ret < 0) { + printf("Handshake status command failed\n"); + goto out; + } + + switch (arg.ret) { + case TEE_SUCCESS: + *hs = param[0].u.value.a; + ret = 0; + break; + default: + ret = -EINVAL; + break; + } + +out: + tee_close_session(chimp_data.tee, chimp_data.session); + chimp_data.tee = NULL; + + return ret; +} + +int chimp_health_status_optee(u32 *health) +{ + struct tee_invoke_arg arg; + struct tee_param param[1]; + int ret; + + ret = init_arg(&arg, TEE_CHIMP_HEALTH_STATUS); + if (ret < 0) + return ret; + + param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_OUTPUT; + + ret = tee_invoke_func(chimp_data.tee, &arg, ARRAY_SIZE(param), param); + if (ret < 0) { + printf("Helath status command failed\n"); + goto out; + } + + switch (arg.ret) { + case TEE_SUCCESS: + *health = param[0].u.value.a; + ret = 0; + break; + default: + ret = -EINVAL; + break; + } + +out: + tee_close_session(chimp_data.tee, chimp_data.session); + chimp_data.tee = NULL; + + return ret; +} + +int chimp_fastboot_optee(void) +{ + struct tee_invoke_arg arg; + int ret; + + ret = init_arg(&arg, TEE_CHIMP_FASTBOOT); + if (ret < 0) + return ret; + + ret = tee_invoke_func(chimp_data.tee, &arg, 0, NULL); + if (ret < 0) { + printf("Chimp boot_fail\n"); + goto out; + } + + switch (arg.ret) { + case TEE_SUCCESS: + ret = 0; + break; + default: + ret = -EINVAL; + break; + } + +out: + tee_close_session(chimp_data.tee, chimp_data.session); + chimp_data.tee = NULL; + + return ret; +} +#else +int chimp_handshake_status_optee(u32 timeout, u32 *status) +{ + printf("ChiMP handshake status fail (OPTEE not enabled)\n"); + return -EINVAL; +} + +int chimp_health_status_optee(u32 *status) +{ + printf("ChiMP health status fail (OPTEE not enabled)\n"); + return -EINVAL; +} + +int chimp_fastboot_optee(void) +{ + printf("ChiMP secure boot fail (OPTEE not enabled)\n"); + return -EINVAL; +} +#endif /* CONFIG_CHIMP_OPTEE */ diff --git a/include/broadcom/chimp.h b/include/broadcom/chimp.h new file mode 100644 index 0000000000..2397e13da0 --- /dev/null +++ b/include/broadcom/chimp.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Broadcom. + * + */ + +#ifndef __CHIMP_H__ +#define __CHIMP_H__ + +#include <linux/compiler.h> + +int chimp_fastboot_optee(void); +int chimp_health_status_optee(u32 *status); +int chimp_handshake_status_optee(u32 timeout, u32 *hstatus); + +#endif