Hi Teresa,
On Wed, Aug 25, 2021 at 12:25 PM Teresa Remmet t.remmet@phytec.de wrote:
binman conversion made flashing flash.bin and u-boot.itb necessary. Update binman config to create a single flash.bin image again.
This updates imx8mp_evk and phyCORE-i.MX8MP as they share the same binman config.
Updated also imx8mp_evk documentation.
Tested on phyCORE-i.MX8MP.
Thanks for taking care of this.
Signed-off-by: Teresa Remmet t.remmet@phytec.de
arch/arm/dts/imx8mp-u-boot.dtsi | 17 ++++++++++++++++- .../imx8mp_evk/imximage-8mp-lpddr4.cfg | 2 +- board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg | 2 +- doc/board/nxp/imx8mp_evk.rst | 1 - 4 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi index a6ede2ed6e30..ace7b2051e7f 100644 --- a/arch/arm/dts/imx8mp-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-u-boot.dtsi @@ -82,7 +82,7 @@ }; };
flash {
spl {
To make this more standard, could you please also pass 'filename = "spl.bin" here too?
Please check: https://lists.denx.de/pipermail/u-boot/2021-August/458754.html
BOOT_FROM sd -LOADER mkimage.flash.mkimage 0x920000 +LOADER mkimage.spl.mkimage 0x920000
Please use "LOADER u-boot-spl-ddr.bin 0x920000" here instead.
diff --git a/board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg b/board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg index b2920b4908ed..2be18de674ba 100644 --- a/board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg +++ b/board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg @@ -7,4 +7,4 @@
ROM_VERSION v2 BOOT_FROM sd -LOADER mkimage.flash.mkimage 0x920000 +LOADER mkimage.spl.mkimage 0x920000
Ditto.
With these changes, you can add:
Reviewed-by: Fabio Estevam festevam@gmail.com
Thanks