On 11.05.21 09:35, Meng.Li@windriver.com wrote:
From: MengLi meng.li@windriver.com
In uboot command line environment, watchdog is not able to be stopped with below commands: SOCFPGA_STRATIX10 # wdt dev watchdog@ffd00200 SOCFPGA_STRATIX10 # wdt stop Refer to watchdog driver in linux kernel, it is also need to reset watchdog after disable it so that the disable action takes effect.
Signed-off-by: Meng Li Meng.Li@windriver.com Reviewed-by: Stefan Roese sr@denx.de
v4: Remove the unauthorized signature. v3: Add the resets to designware_wdt_priv and initialize it in probe(). v2: Change "#if CONFIG_IS_ENABLED(DM_RESET)" into "if (CONFIG_IS_ENABLED(DM_RESET)) {", and define the variable into if condition sentence.
drivers/watchdog/designware_wdt.c | 31 +++++++++++++++++++++---------- 1 file changed, 21 insertions(+), 10 deletions(-)
diff --git a/drivers/watchdog/designware_wdt.c b/drivers/watchdog/designware_wdt.c index 12f09a7a39..cdf6b5709b 100644 --- a/drivers/watchdog/designware_wdt.c +++ b/drivers/watchdog/designware_wdt.c @@ -23,6 +23,7 @@ struct designware_wdt_priv { void __iomem *base; unsigned int clk_khz;
struct reset_ctl_bulk *resets; };
/*
@@ -96,6 +97,18 @@ static int designware_wdt_stop(struct udevice *dev) designware_wdt_reset(dev); writel(0, priv->base + DW_WDT_CR);
if (CONFIG_IS_ENABLED(DM_RESET)) {int ret;ret = reset_assert_bulk(priv->resets);if (ret)return ret;ret = reset_deassert_bulk(priv->resets);if (ret)return ret;- }
- return 0; }
@@ -143,13 +143,11 @@ static int designware_wdt_probe(struct udevice *dev) #endif
if (CONFIG_IS_ENABLED(DM_RESET)) {
struct reset_ctl_bulk resets;ret = reset_get_bulk(dev, &resets);
ret = reset_get_bulk(dev, priv->resets);
ret = reset_deassert_bulk(&resets);
ret = reset_deassert_bulk((priv->resets);
Please see the double open "(" and the single closing ")" above!
Did you ever at least build-test this? Please send a fixed and also *tested* v5.
Thanks, Stefan