-----Original Message----- From: U-Boot u-boot-bounces@lists.denx.de On Behalf Of Kuldeep Singh Sent: Tuesday, June 23, 2020 3:07 PM To: u-boot@lists.denx.de Cc: Priyanka Jain priyanka.jain@nxp.com; Kuldeep Singh kuldeep.singh@nxp.com Subject: [PATCH] configs: ls1046aqds: Configure QSPI related configs
LS1046A-QDS has "s25fl128s" flash of size with 16M with 64K sector size. The board requires few spi-flash related configs to be updated in TFA and QSPI _defconfigs.
Following are the changes:
- Enable CONFIG_FSL_QSPI
- Unset CONFIG_SPI_FLASH_BAR
- Enable CONFIG_SYS_RELOC_GD_ENV_ADDR
- Restore CONFIG_ENV_ADDR to 0x60500000
Signed-off-by: Kuldeep Singh kuldeep.singh@nxp.com
configs/ls1046aqds_tfa_SECURE_BOOT_defconfig | 2 ++ configs/ls1046aqds_tfa_defconfig | 3 ++- 2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig index 2b84a6b..2780a41 100644 --- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig @@ -47,6 +47,7 @@ CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y CONFIG_SYS_FLASH_CFI=y CONFIG_MTD_RAW_NAND=y CONFIG_SF_DEFAULT_BUS=1 +# CONFIG_SPI_FLASH_BAR is not set CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHYLIB=y CONFIG_PHYLIB_10G=y @@ -63,6 +64,7 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y +CONFIG_FSL_QSPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig index e412c05..9cb4592 100644 --- a/configs/ls1046aqds_tfa_defconfig +++ b/configs/ls1046aqds_tfa_defconfig @@ -42,7 +42,8 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=0 -CONFIG_ENV_ADDR=0x40500000 +CONFIG_ENV_ADDR=0x60500000 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
Please confirm that all boot-sources will work fine with this change.
Regards Priyanka <snip>