Adds a test using a makeshift MDIO MUX. The test is based on the existing MDIO test. It uses the last emulated PHY register to verify MUX selection.
Signed-off-by: Alex Marginean alexm.osslist@gmail.com ---
Changes in v2: - no change Changes in v3: - no change, just fighting with the email server
arch/Kconfig | 1 + arch/sandbox/dts/test.dts | 21 +++++++- drivers/net/Kconfig | 10 ++++ drivers/net/Makefile | 1 + drivers/net/mdio_mux_sandbox.c | 97 ++++++++++++++++++++++++++++++++++ test/dm/Makefile | 1 + test/dm/mdio_mux.c | 80 ++++++++++++++++++++++++++++ 7 files changed, 210 insertions(+), 1 deletion(-) create mode 100644 drivers/net/mdio_mux_sandbox.c create mode 100644 test/dm/mdio_mux.c
diff --git a/arch/Kconfig b/arch/Kconfig index 1e62a7615d..1a0f1ab8a7 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -122,6 +122,7 @@ config SANDBOX imply PCH imply PHYLIB imply DM_MDIO + imply DM_MDIO_MUX
config SH bool "SuperH architecture" diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index dd50a951a8..a05e437abf 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -808,7 +808,26 @@ dma-names = "m2m", "tx0", "rx0"; };
- mdio-test { + /* + * keep mdio-mux ahead of mdio, u-boot doesn't do reference count on + * these devices and we don't want mdio-parent-bus to be released before + * the mux. + */ + mdio-mux-test { + compatible = "sandbox,mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + mdio-parent-bus = <&mdio>; + + mdio-ch-test@0 { + reg = <0>; + }; + mdio-ch-test@1 { + reg = <1>; + }; + }; + + mdio: mdio-test { compatible = "sandbox,mdio"; }; }; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 0dc26ac254..403df5e960 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -46,6 +46,16 @@ config MDIO_SANDBOX
This driver is used in for testing in test/dm/mdio.c
+config MDIO_MUX_SANDBOX + depends on DM_MDIO_MUX && MDIO_SANDBOX + default y + bool "Sandbox: Mocked MDIO-MUX driver" + help + This driver implements dummy select/deselect ops mimicking a MUX on + the MDIO bux. It uses mdio_sandbox driver as parent MDIO. + + This driver is used for testing in test/dm/mdio.c + menuconfig NETDEVICES bool "Network device support" depends on NET diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 40038427db..a3706ca27b 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -78,3 +78,4 @@ obj-$(CONFIG_MEDIATEK_ETH) += mtk_eth.o obj-y += mscc_eswitch/ obj-$(CONFIG_HIGMACV300_ETH) += higmacv300.o obj-$(CONFIG_MDIO_SANDBOX) += mdio_sandbox.o +obj-$(CONFIG_MDIO_MUX_SANDBOX) += mdio_mux_sandbox.o diff --git a/drivers/net/mdio_mux_sandbox.c b/drivers/net/mdio_mux_sandbox.c new file mode 100644 index 0000000000..3dba4d18a1 --- /dev/null +++ b/drivers/net/mdio_mux_sandbox.c @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 + * Alex Marginean, NXP + */ + +#include <dm.h> +#include <errno.h> +#include <miiphy.h> + +/* macros copied over from mdio_sandbox.c */ +#define SANDBOX_PHY_ADDR 5 +#define SANDBOX_PHY_REG_CNT 2 + +struct mdio_mux_sandbox_priv { + int enabled; + int sel; +}; + +static int mdio_mux_sandbox_mark_selection(struct udevice *dev, int sel) +{ + struct udevice *mdio; + struct mdio_ops *ops; + int err; + + /* + * find the sandbox parent mdio and write a register on the PHY there + * so the mux test can verify selection. + */ + err = uclass_get_device_by_name(UCLASS_MDIO, "mdio-test", &mdio); + if (err) + return err; + ops = mdio_get_ops(mdio); + return ops->write(mdio, SANDBOX_PHY_ADDR, MDIO_DEVAD_NONE, + SANDBOX_PHY_REG_CNT - 1, (u16)sel); +} + +static int mdio_mux_sandbox_select(struct udevice *dev, int cur, int sel) +{ + struct mdio_mux_sandbox_priv *priv = dev_get_priv(dev); + + if (!priv->enabled) + return -ENODEV; + + if (cur != priv->sel) + return -EINVAL; + + priv->sel = sel; + mdio_mux_sandbox_mark_selection(dev, priv->sel); + + return 0; +} + +static int mdio_mux_sandbox_deselect(struct udevice *dev, int sel) +{ + struct mdio_mux_sandbox_priv *priv = dev_get_priv(dev); + + if (!priv->enabled) + return -ENODEV; + + if (sel != priv->sel) + return -EINVAL; + + priv->sel = -1; + mdio_mux_sandbox_mark_selection(dev, priv->sel); + + return 0; +} + +static const struct mdio_mux_ops mdio_mux_sandbox_ops = { + .select = mdio_mux_sandbox_select, + .deselect = mdio_mux_sandbox_deselect, +}; + +static int mdio_mux_sandbox_probe(struct udevice *dev) +{ + struct mdio_mux_sandbox_priv *priv = dev_get_priv(dev); + + priv->enabled = 1; + priv->sel = -1; + + return 0; +} + +static const struct udevice_id mdio_mux_sandbox_ids[] = { + { .compatible = "sandbox,mdio-mux" }, + { } +}; + +U_BOOT_DRIVER(mdio_mux_sandbox) = { + .name = "mdio_mux_sandbox", + .id = UCLASS_MDIO_MUX, + .of_match = mdio_mux_sandbox_ids, + .probe = mdio_mux_sandbox_probe, + .ops = &mdio_mux_sandbox_ops, + .priv_auto_alloc_size = sizeof(struct mdio_mux_sandbox_priv), +}; diff --git a/test/dm/Makefile b/test/dm/Makefile index 3f042e3ab4..8b3477c136 100644 --- a/test/dm/Makefile +++ b/test/dm/Makefile @@ -61,4 +61,5 @@ obj-$(CONFIG_TEE) += tee.o obj-$(CONFIG_VIRTIO_SANDBOX) += virtio.o obj-$(CONFIG_DMA) += dma.o obj-$(CONFIG_DM_MDIO) += mdio.o +obj-$(CONFIG_DM_MDIO_MUX) += mdio_mux.o endif diff --git a/test/dm/mdio_mux.c b/test/dm/mdio_mux.c new file mode 100644 index 0000000000..f962e09dbc --- /dev/null +++ b/test/dm/mdio_mux.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 + * Alex Marginean, NXP + */ + +#include <common.h> +#include <dm.h> +#include <dm/test.h> +#include <misc.h> +#include <test/ut.h> +#include <miiphy.h> + +/* macros copied over from mdio_sandbox.c */ +#define SANDBOX_PHY_ADDR 5 +#define SANDBOX_PHY_REG_CNT 2 + +#define TEST_REG_VALUE 0xabcd + +static int dm_test_mdio_mux(struct unit_test_state *uts) +{ + struct uclass *uc; + struct udevice *mux; + struct udevice *mdio_ch0, *mdio_ch1, *mdio; + struct mdio_ops *ops, *ops_parent; + struct mdio_mux_ops *mmops; + u16 reg; + + ut_assertok(uclass_get(UCLASS_MDIO_MUX, &uc)); + + ut_assertok(uclass_get_device_by_name(UCLASS_MDIO_MUX, "mdio-mux-test", + &mux)); + + ut_assertok(uclass_get_device_by_name(UCLASS_MDIO, "mdio-ch-test@0", + &mdio_ch0)); + ut_assertok(uclass_get_device_by_name(UCLASS_MDIO, "mdio-ch-test@1", + &mdio_ch1)); + + ut_assertok(uclass_get_device_by_name(UCLASS_MDIO, "mdio-test", &mdio)); + + ops = mdio_get_ops(mdio_ch0); + ut_assertnonnull(ops); + ut_assertnonnull(ops->read); + ut_assertnonnull(ops->write); + + mmops = mdio_mux_get_ops(mux); + ut_assertnonnull(mmops); + ut_assertnonnull(mmops->select); + + ops_parent = mdio_get_ops(mdio); + ut_assertnonnull(ops); + ut_assertnonnull(ops->read); + + /* + * mux driver sets last register on the emulated PHY whenever a group + * is selected to the selection #. Just reading that register from + * either of the child buses should return the id of the child bus + */ + reg = ops->read(mdio_ch0, SANDBOX_PHY_ADDR, MDIO_DEVAD_NONE, + SANDBOX_PHY_REG_CNT - 1); + ut_asserteq(reg, 0); + + reg = ops->read(mdio_ch1, SANDBOX_PHY_ADDR, MDIO_DEVAD_NONE, + SANDBOX_PHY_REG_CNT - 1); + ut_asserteq(reg, 1); + + mmops->select(mux, MDIO_MUX_SELECT_NONE, 5); + reg = ops_parent->read(mdio, SANDBOX_PHY_ADDR, MDIO_DEVAD_NONE, + SANDBOX_PHY_REG_CNT - 1); + ut_asserteq(reg, 5); + + mmops->deselect(mux, 5); + reg = ops_parent->read(mdio, SANDBOX_PHY_ADDR, MDIO_DEVAD_NONE, + SANDBOX_PHY_REG_CNT - 1); + ut_asserteq(reg, (u16)MDIO_MUX_SELECT_NONE); + + return 0; +} + +DM_TEST(dm_test_mdio_mux, DM_TESTF_SCAN_FDT);