Hi,
On 20/02/17 10:21, Dr. Philipp Tomsich wrote:
On 20 Feb 2017, at 11:18, Andre Przywara <andre.przywara@arm.com mailto:andre.przywara@arm.com> wrote:
Our board’s early-stage normally shouldn't need to do anything on this I2C bus, but customer boards may come up with a use for it (image this going towards battery/power managing circuitry on a baseboard).
In this case we should definitely remove these three lines.
I should have said “we don’t do anything with this I2C bus, but it’s available for customer use via the edge connector and a header on our eval-board”.
As there’s no way to enable pull-ups via a command in U-Boot, I’d prefer to keep these pull ups configured.
So either make this a separate patch or use some other method of enabling this, but please keep this board specific setting separate from the SoC enablement.
Cheers, Andre.