The FIT config node has reversed ATF and u-boot: ATF is set to firmware but u-boot is set to loadable. This script can work previously because spl fit driver wrongly appends fdt to all loadable images. With the issue fixed, the u-boot in loadable does not have fdt appended and fails to work. So correct script by moving u-boot to firmware and ATF to loadable.
Signed-off-by: Ye Li ye.li@nxp.com --- arch/arm/mach-imx/mkimage_fit_atf.sh | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-imx/mkimage_fit_atf.sh b/arch/arm/mach-imx/mkimage_fit_atf.sh index ad81d5e..dd1ca5a 100755 --- a/arch/arm/mach-imx/mkimage_fit_atf.sh +++ b/arch/arm/mach-imx/mkimage_fit_atf.sh @@ -116,8 +116,8 @@ if [ -f $BL32 ]; then cat << __CONF_SECTION_EOF config@$cnt { description = "$(basename $dtname .dtb)"; - firmware = "atf@1"; - loadables = "uboot@1", "tee@1"; + firmware = "uboot@1"; + loadables = "atf@1", "tee@1"; fdt = "fdt@$cnt"; }; __CONF_SECTION_EOF @@ -125,8 +125,8 @@ else cat << __CONF_SECTION1_EOF config@$cnt { description = "$(basename $dtname .dtb)"; - firmware = "atf@1"; - loadables = "uboot@1"; + firmware = "uboot@1"; + loadables = "atf@1"; fdt = "fdt@$cnt"; }; __CONF_SECTION1_EOF