Hi Andy,
This patch sets the MMC width according to the MMC host capabilities. It turned out, that there are some targets (e.g. GONI), which are able to read data from SPI only at 4 bit mode. This patch restricts the width number according to the MMC host.
Signed-off-by: Lukasz Majewski l.majewski@samsung.com Signed-off-by: Kyungmin Park kyungmin.park@samsung.com Cc: Andy Fleming afleming@gmail.com
drivers/mmc/mmc.c | 4 +++- include/mmc.h | 3 +++ 2 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 49c3349..51c0106 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1103,7 +1103,9 @@ int mmc_startup(struct mmc *mmc) else mmc_set_clock(mmc, 25000000); } else {
for (width = EXT_CSD_BUS_WIDTH_8; width >= 0;width--) {
width = ((mmc->host_caps & MMC_MODE_MASK_WIDTH_BITS)
MMC_MODE_WIDTH_BITS_SHIFT);for (; width >= 0; width--) { /* Set the card to use 4 bit*/ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, width);diff --git a/include/mmc.h b/include/mmc.h index 30c2375..ff2f28e 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -47,6 +47,9 @@ #define MMC_MODE_SPI 0x400 #define MMC_MODE_HC 0x800
+#define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT) +#define MMC_MODE_WIDTH_BITS_SHIFT 8
#define SD_DATA_4BIT 0x00040000
#define IS_SD(x) (x->version & SD_VERSION_SD)
Do you have any opinions/comments about this patch? It has already spent some time on the mainling list and nobody complaint :-)