Support the 88E1510 PHY which is very similar to the 88E1518. I also set the INTn output and configured the LEDs.
Signed-off-by: Clemens Gruber clemens.gruber@pqgruber.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Hao Zhang hzhang@ti.com Cc: Michal Simek michal.simek@xilinx.com
--- This replaces the previously sent patch http://patchwork.ozlabs.org/patch/478488/ --- drivers/net/phy/marvell.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index cff5c87..eab1558 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -336,6 +336,25 @@ static int m88e1518_config(struct phy_device *phydev) return m88e1111s_config(phydev); }
+/* Marvell 88E1510 */ +static int m88e1510_config(struct phy_device *phydev) +{ + /* Select page 3 */ + phy_write(phydev, MDIO_DEVAD_NONE, 22, 3); + + /* Enable INTn output on LED[2] */ + m88e1518_phy_writebits(phydev, 18, 7, 1, 1); + + /* Configure LEDs */ + m88e1518_phy_writebits(phydev, 16, 0, 4, 3); /* LED[0]:0011 (ACT) */ + m88e1518_phy_writebits(phydev, 16, 4, 4, 6); /* LED[1]:0110 (LINK) */ + + /* Reset page selection */ + phy_write(phydev, MDIO_DEVAD_NONE, 22, 0); + + return m88e1518_config(phydev); +} + /* Marvell 88E1118 */ static int m88e1118_config(struct phy_device *phydev) { @@ -548,6 +567,16 @@ static struct phy_driver M88E1149S_driver = { .shutdown = &genphy_shutdown, };
+static struct phy_driver M88E1510_driver = { + .name = "Marvell 88E1510", + .uid = 0x1410dd0, + .mask = 0xffffff0, + .features = PHY_GBIT_FEATURES, + .config = &m88e1510_config, + .startup = &m88e1011s_startup, + .shutdown = &genphy_shutdown, +}; + static struct phy_driver M88E1518_driver = { .name = "Marvell 88E1518", .uid = 0x1410dd1, @@ -578,6 +607,7 @@ int phy_marvell_init(void) phy_register(&M88E1118R_driver); phy_register(&M88E1111S_driver); phy_register(&M88E1011S_driver); + phy_register(&M88E1510_driver); phy_register(&M88E1518_driver);
return 0;