[U-Boot] [PATCH 75/93] arm: Remove omap3_beagle board

19 Nov 2018

This board has not been converted to CONFIG_DM_BLK by the deadline.
Remove it.
Signed-off-by: Simon Glass sjg@chromium.org
---
arch/arm/mach-omap2/omap3/Kconfig |   1 -
 board/ti/beagle/Kconfig           |  12 -
 board/ti/beagle/MAINTAINERS       |   6 -
 board/ti/beagle/Makefile          |   7 -
 board/ti/beagle/beagle.c          | 591 ------------------------------
 board/ti/beagle/beagle.h          | 545 ---------------------------
 board/ti/beagle/led.c             |  71 ----
 configs/omap3_beagle_defconfig    |  82 -----
 include/configs/omap3_beagle.h    | 233 ------------
 9 files changed, 1548 deletions(-)
 delete mode 100644 board/ti/beagle/Kconfig
 delete mode 100644 board/ti/beagle/MAINTAINERS
 delete mode 100644 board/ti/beagle/Makefile
 delete mode 100644 board/ti/beagle/beagle.c
 delete mode 100644 board/ti/beagle/beagle.h
 delete mode 100644 board/ti/beagle/led.c
 delete mode 100644 configs/omap3_beagle_defconfig
 delete mode 100644 include/configs/omap3_beagle.h

diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig
index 6e3942ad2d3..6f6ad424f84 100644
--- a/arch/arm/mach-omap2/omap3/Kconfig
+++ b/arch/arm/mach-omap2/omap3/Kconfig
@@ -195,7 +195,6 @@ config SYS_SOC
source "board/logicpd/am3517evm/Kconfig"
 source "board/teejet/mt_ventoux/Kconfig"
-source "board/ti/beagle/Kconfig"
 source "board/compulab/cm_t35/Kconfig"
 source "board/compulab/cm_t3517/Kconfig"
 source "board/ti/evm/Kconfig"
diff --git a/board/ti/beagle/Kconfig b/board/ti/beagle/Kconfig
deleted file mode 100644
index c2eff9e71b0..00000000000
--- a/board/ti/beagle/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OMAP3_BEAGLE
-
-config SYS_BOARD
-	default "beagle"
-
-config SYS_VENDOR
-	default "ti"
-
-config SYS_CONFIG_NAME
-	default "omap3_beagle"
-
-endif
diff --git a/board/ti/beagle/MAINTAINERS b/board/ti/beagle/MAINTAINERS
deleted file mode 100644
index c1d81d4174e..00000000000
--- a/board/ti/beagle/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-BEAGLE BOARD
-M:	Tom Rini trini@konsulko.com
-S:	Maintained
-F:	board/ti/beagle/
-F:	include/configs/omap3_beagle.h
-F:	configs/omap3_beagle_defconfig
diff --git a/board/ti/beagle/Makefile b/board/ti/beagle/Makefile
deleted file mode 100644
index fc9288cf186..00000000000
--- a/board/ti/beagle/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y	:= beagle.o
-obj-$(CONFIG_LED_STATUS) += led.o
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
deleted file mode 100644
index 826aace3fba..00000000000
--- a/board/ti/beagle/beagle.c
+++ /dev/null
@@ -1,591 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2004-2011
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- *	Sunil Kumar sunilsaini05@gmail.com
- *	Shashi Ranjan shashiranjanmca05@gmail.com
- *
- * Derived from Beagle Board and 3430 SDP code by
- *	Richard Woodruff r-woodruff2@ti.com
- *	Syed Mohammed Khasim khasim@ti.com
- *
- */
-#include <common.h>
-#include <dm.h>
-#include <ns16550.h>
-#ifdef CONFIG_LED_STATUS
-#include <status_led.h>
-#endif
-#include <twl4030.h>
-#include <linux/mtd/rawnand.h>
-#include <asm/io.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/omap_musb.h>
-#include <linux/errno.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb/musb.h>
-#include "beagle.h"
-#include <command.h>
-
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/ehci-omap.h>
-#endif
-
-#define TWL4030_I2C_BUS			0
-#define EXPANSION_EEPROM_I2C_BUS	1
-#define EXPANSION_EEPROM_I2C_ADDRESS	0x50
-
-#define TINCANTOOLS_ZIPPY		0x01000100
-#define TINCANTOOLS_ZIPPY2		0x02000100
-#define TINCANTOOLS_TRAINER		0x04000100
-#define TINCANTOOLS_SHOWDOG		0x03000100
-#define KBADC_BEAGLEFPGA		0x01000600
-#define LW_BEAGLETOUCH			0x01000700
-#define BRAINMUX_LCDOG			0x01000800
-#define BRAINMUX_LCDOGTOUCH		0x02000800
-#define BBTOYS_WIFI			0x01000B00
-#define BBTOYS_VGA			0x02000B00
-#define BBTOYS_LCD			0x03000B00
-#define BCT_BRETTL3			0x01000F00
-#define BCT_BRETTL4			0x02000F00
-#define LSR_COM6L_ADPT			0x01001300
-#define BEAGLE_NO_EEPROM		0xffffffff
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct {
-	unsigned int device_vendor;
-	unsigned char revision;
-	unsigned char content;
-	char fab_revision[8];
-	char env_var[16];
-	char env_setting[64];
-} expansion_config;
-
-static const struct ns16550_platdata beagle_serial = {
-	.base = OMAP34XX_UART3,
-	.reg_shift = 2,
-	.clock = V_NS16550_CLK,
-	.fcr = UART_FCR_DEFVAL,
-};
-
-U_BOOT_DEVICE(beagle_uart) = {
-	"ns16550_serial",
-	&beagle_serial
-};
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
-	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-	/* board id for Linux */
-	gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE;
-	/* boot param addr */
-	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
-	status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON);
-#endif
-
-	return 0;
-}
-
-#if defined(CONFIG_SPL_OS_BOOT)
-int spl_start_uboot(void)
-{
-	/* break into full u-boot on 'c' */
-	if (serial_tstc() && serial_getc() == 'c')
-		return 1;
-
-	return 0;
-}
-#endif /* CONFIG_SPL_OS_BOOT */
-
-/*
- * Routine: get_board_revision
- * Description: Detect if we are running on a Beagle revision Ax/Bx,
- *		C1/2/3, C4, xM Ax/Bx or xM Cx. This can be done by reading
- *		the level of GPIO173, GPIO172 and GPIO171. This should
- *		result in
- *		GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx
- *		GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3
- *		GPIO173, GPIO172, GPIO171: 1 0 1 => C4
- *		GPIO173, GPIO172, GPIO171: 0 1 0 => xM Cx
- *		GPIO173, GPIO172, GPIO171: 0 0 0 => xM Ax/Bx
- */
-static int get_board_revision(void)
-{
-	static int revision = -1;
-
-	if (revision == -1) {
-		if (!gpio_request(171, "rev0") &&
-		    !gpio_request(172, "rev1") &&
-		    !gpio_request(173, "rev2")) {
-			gpio_direction_input(171);
-			gpio_direction_input(172);
-			gpio_direction_input(173);
-
-			revision = gpio_get_value(173) << 2 |
-				gpio_get_value(172) << 1 |
-				gpio_get_value(171);
-		} else {
-			printf("Error: unable to acquire board revision GPIOs\n");
-		}
-	}
-
-	return revision;
-}
-
-#ifdef CONFIG_SPL_BUILD
-/*
- * Routine: get_board_mem_timings
- * Description: If we use SPL then there is no x-loader nor config header
- * so we have to setup the DDR timings ourself on both banks.
- */
-void get_board_mem_timings(struct board_sdrc_timings *timings)
-{
-	int pop_mfr, pop_id;
-
-	/*
-	 * We need to identify what PoP memory is on the board so that
-	 * we know what timings to use.  If we can't identify it then
-	 * we know it's an xM.  To map the ID values please see nand_ids.c
-	 */
-	identify_nand_chip(&pop_mfr, &pop_id);
-
-	timings->mr = MICRON_V_MR_165;
-	switch (get_board_revision()) {
-	case REVISION_C4:
-		if (pop_mfr == NAND_MFR_STMICRO && pop_id == 0xba) {
-			/* 512MB DDR */
-			timings->mcfg = NUMONYX_V_MCFG_165(512 << 20);
-			timings->ctrla = NUMONYX_V_ACTIMA_165;
-			timings->ctrlb = NUMONYX_V_ACTIMB_165;
-			timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
-			break;
-		} else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xba) {
-			/* Beagleboard Rev C4, 512MB Nand/256MB DDR*/
-			timings->mcfg = MICRON_V_MCFG_165(128 << 20);
-			timings->ctrla = MICRON_V_ACTIMA_165;
-			timings->ctrlb = MICRON_V_ACTIMB_165;
-			timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
-			break;
-		} else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xbc) {
-			/* Beagleboard Rev C5, 256MB DDR */
-			timings->mcfg = MICRON_V_MCFG_200(256 << 20);
-			timings->ctrla = MICRON_V_ACTIMA_200;
-			timings->ctrlb = MICRON_V_ACTIMB_200;
-			timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
-			break;
-		}
-	case REVISION_XM_AB:
-	case REVISION_XM_C:
-		if (pop_mfr == 0) {
-			/* 256MB DDR */
-			timings->mcfg = MICRON_V_MCFG_200(256 << 20);
-			timings->ctrla = MICRON_V_ACTIMA_200;
-			timings->ctrlb = MICRON_V_ACTIMB_200;
-			timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
-		} else {
-			/* 512MB DDR */
-			timings->mcfg = NUMONYX_V_MCFG_165(512 << 20);
-			timings->ctrla = NUMONYX_V_ACTIMA_165;
-			timings->ctrlb = NUMONYX_V_ACTIMB_165;
-			timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
-		}
-		break;
-	default:
-		/* Assume 128MB and Micron/165MHz timings to be safe */
-		timings->mcfg = MICRON_V_MCFG_165(128 << 20);
-		timings->ctrla = MICRON_V_ACTIMA_165;
-		timings->ctrlb = MICRON_V_ACTIMB_165;
-		timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
-	}
-}
-#endif
-
-/*
- * Routine: get_expansion_id
- * Description: This function checks for expansion board by checking I2C
- *		bus 1 for the availability of an AT24C01B serial EEPROM.
- *		returns the device_vendor field from the EEPROM
- */
-static unsigned int get_expansion_id(void)
-{
-	i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
-
-	/* return BEAGLE_NO_EEPROM if eeprom doesn't respond */
-	if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
-		i2c_set_bus_num(TWL4030_I2C_BUS);
-		return BEAGLE_NO_EEPROM;
-	}
-
-	/* read configuration data */
-	i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
-		 sizeof(expansion_config));
-
-	/* retry reading configuration data with 16bit addressing */
-	if ((expansion_config.device_vendor == 0xFFFFFF00) ||
-	    (expansion_config.device_vendor == 0xFFFFFFFF)) {
-		printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n");
-		i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config,
-			 sizeof(expansion_config));
-	}
-
-	i2c_set_bus_num(TWL4030_I2C_BUS);
-
-	return expansion_config.device_vendor;
-}
-
-#ifdef CONFIG_VIDEO_OMAP3
-/*
- * Configure DSS to display background color on DVID
- * Configure VENC to display color bar on S-Video
- */
-static void beagle_display_init(void)
-{
-	omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH);
-	switch (get_board_revision()) {
-	case REVISION_AXBX:
-	case REVISION_CX:
-	case REVISION_C4:
-		omap3_dss_panel_config(&dvid_cfg);
-		break;
-	case REVISION_XM_AB:
-	case REVISION_XM_C:
-	default:
-		omap3_dss_panel_config(&dvid_cfg_xm);
-		break;
-	}
-}
-
-/*
- * Enable DVI power
- */
-static void beagle_dvi_pup(void)
-{
-	uchar val;
-
-	switch (get_board_revision()) {
-	case REVISION_AXBX:
-	case REVISION_CX:
-	case REVISION_C4:
-		gpio_request(170, "dvi");
-		gpio_direction_output(170, 0);
-		gpio_set_value(170, 1);
-		break;
-	case REVISION_XM_AB:
-	case REVISION_XM_C:
-	default:
-		#define GPIODATADIR1 (TWL4030_BASEADD_GPIO+3)
-		#define GPIODATAOUT1 (TWL4030_BASEADD_GPIO+6)
-
-		i2c_read(TWL4030_CHIP_GPIO, GPIODATADIR1, 1, &val, 1);
-		val |= 4;
-		i2c_write(TWL4030_CHIP_GPIO, GPIODATADIR1, 1, &val, 1);
-
-		i2c_read(TWL4030_CHIP_GPIO, GPIODATAOUT1, 1, &val, 1);
-		val |= 4;
-		i2c_write(TWL4030_CHIP_GPIO, GPIODATAOUT1, 1, &val, 1);
-		break;
-	}
-}
-#endif
-
-#ifdef CONFIG_USB_MUSB_OMAP2PLUS
-static struct musb_hdrc_config musb_config = {
-	.multipoint     = 1,
-	.dyn_fifo       = 1,
-	.num_eps        = 16,
-	.ram_bits       = 12,
-};
-
-static struct omap_musb_board_data musb_board_data = {
-	.interface_type	= MUSB_INTERFACE_ULPI,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_USB_MUSB_HOST)
-	.mode           = MUSB_HOST,
-#elif defined(CONFIG_USB_MUSB_GADGET)
-	.mode		= MUSB_PERIPHERAL,
-#else
-#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET"
-#endif
-	.config         = &musb_config,
-	.power          = 100,
-	.platform_ops	= &omap2430_ops,
-	.board_data	= &musb_board_data,
-};
-#endif
-
-/*
- * Routine: misc_init_r
- * Description: Configure board specific parts
- */
-int misc_init_r(void)
-{
-	struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
-	struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
-	struct control_prog_io *prog_io_base = (struct control_prog_io *)OMAP34XX_CTRL_BASE;
-	bool generate_fake_mac = false;
-	u32 value;
-
-	/* Enable i2c2 pullup resisters */
-	value = readl(&prog_io_base->io1);
-	value &= ~(PRG_I2C2_PULLUPRESX);
-	writel(value, &prog_io_base->io1);
-
-	switch (get_board_revision()) {
-	case REVISION_AXBX:
-		printf("Beagle Rev Ax/Bx\n");
-		env_set("beaglerev", "AxBx");
-		break;
-	case REVISION_CX:
-		printf("Beagle Rev C1/C2/C3\n");
-		env_set("beaglerev", "Cx");
-		MUX_BEAGLE_C();
-		break;
-	case REVISION_C4:
-		printf("Beagle Rev C4\n");
-		env_set("beaglerev", "C4");
-		MUX_BEAGLE_C();
-		/* Set VAUX2 to 1.8V for EHCI PHY */
-		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
-					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
-					TWL4030_PM_RECEIVER_DEV_GRP_P1);
-		break;
-	case REVISION_XM_AB:
-		printf("Beagle xM Rev A/B\n");
-		env_set("beaglerev", "xMAB");
-		MUX_BEAGLE_XM();
-		/* Set VAUX2 to 1.8V for EHCI PHY */
-		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
-					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
-					TWL4030_PM_RECEIVER_DEV_GRP_P1);
-		generate_fake_mac = true;
-		break;
-	case REVISION_XM_C:
-		printf("Beagle xM Rev C\n");
-		env_set("beaglerev", "xMC");
-		MUX_BEAGLE_XM();
-		/* Set VAUX2 to 1.8V for EHCI PHY */
-		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
-					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
-					TWL4030_PM_RECEIVER_DEV_GRP_P1);
-		generate_fake_mac = true;
-		break;
-	default:
-		printf("Beagle unknown 0x%02x\n", get_board_revision());
-		MUX_BEAGLE_XM();
-		/* Set VAUX2 to 1.8V for EHCI PHY */
-		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
-					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
-					TWL4030_PM_RECEIVER_DEV_GRP_P1);
-		generate_fake_mac = true;
-	}
-
-	switch (get_expansion_id()) {
-	case TINCANTOOLS_ZIPPY:
-		printf("Recognized Tincantools Zippy board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_TINCANTOOLS_ZIPPY();
-		env_set("buddy", "zippy");
-		break;
-	case TINCANTOOLS_ZIPPY2:
-		printf("Recognized Tincantools Zippy2 board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_TINCANTOOLS_ZIPPY();
-		env_set("buddy", "zippy2");
-		break;
-	case TINCANTOOLS_TRAINER:
-		printf("Recognized Tincantools Trainer board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		MUX_TINCANTOOLS_ZIPPY();
-		MUX_TINCANTOOLS_TRAINER();
-		env_set("buddy", "trainer");
-		break;
-	case TINCANTOOLS_SHOWDOG:
-		printf("Recognized Tincantools Showdow board (rev %d %s)\n",
-			expansion_config.revision,
-			expansion_config.fab_revision);
-		/* Place holder for DSS2 definition for showdog lcd */
-		env_set("defaultdisplay", "showdoglcd");
-		env_set("buddy", "showdog");
-		break;
-	case KBADC_BEAGLEFPGA:
-		printf("Recognized KBADC Beagle FPGA board\n");
-		MUX_KBADC_BEAGLEFPGA();
-		env_set("buddy", "beaglefpga");
-		break;
-	case LW_BEAGLETOUCH:
-		printf("Recognized Liquidware BeagleTouch board\n");
-		env_set("buddy", "beagletouch");
-		break;
-	case BRAINMUX_LCDOG:
-		printf("Recognized Brainmux LCDog board\n");
-		env_set("buddy", "lcdog");
-		break;
-	case BRAINMUX_LCDOGTOUCH:
-		printf("Recognized Brainmux LCDog Touch board\n");
-		env_set("buddy", "lcdogtouch");
-		break;
-	case BBTOYS_WIFI:
-		printf("Recognized BeagleBoardToys WiFi board\n");
-		MUX_BBTOYS_WIFI()
-		env_set("buddy", "bbtoys-wifi");
-		break;
-	case BBTOYS_VGA:
-		printf("Recognized BeagleBoardToys VGA board\n");
-		break;
-	case BBTOYS_LCD:
-		printf("Recognized BeagleBoardToys LCD board\n");
-		break;
-	case BCT_BRETTL3:
-		printf("Recognized bct electronic GmbH brettl3 board\n");
-		break;
-	case BCT_BRETTL4:
-		printf("Recognized bct electronic GmbH brettl4 board\n");
-		break;
-	case LSR_COM6L_ADPT:
-		printf("Recognized LSR COM6L Adapter Board\n");
-		MUX_BBTOYS_WIFI()
-		env_set("buddy", "lsr-com6l-adpt");
-		break;
-	case BEAGLE_NO_EEPROM:
-		printf("No EEPROM on expansion board\n");
-		env_set("buddy", "none");
-		break;
-	default:
-		printf("Unrecognized expansion board: %x\n",
-			expansion_config.device_vendor);
-		env_set("buddy", "unknown");
-	}
-
-	if (expansion_config.content == 1)
-		env_set(expansion_config.env_var, expansion_config.env_setting);
-
-	twl4030_power_init();
-	switch (get_board_revision()) {
-	case REVISION_XM_AB:
-		twl4030_led_init(TWL4030_LED_LEDEN_LEDBON);
-		break;
-	default:
-		twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
-		break;
-	}
-
-	/* Set GPIO states before they are made outputs */
-	writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,
-		&gpio6_base->setdataout);
-	writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
-		GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
-
-	/* Configure GPIOs to output */
-	writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
-	writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
-		GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
-
-	omap_die_id_display();
-
-#ifdef CONFIG_VIDEO_OMAP3
-	beagle_dvi_pup();
-	beagle_display_init();
-	omap3_dss_enable();
-#endif
-
-#ifdef CONFIG_USB_MUSB_OMAP2PLUS
-	musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE);
-#endif
-
-	if (generate_fake_mac)
-		omap_die_id_usbethaddr();
-
-#if defined(CONFIG_MTDIDS_DEFAULT) && defined(CONFIG_MTDPARTS_DEFAULT)
-	if (strlen(CONFIG_MTDIDS_DEFAULT))
-		env_set("mtdids", CONFIG_MTDIDS_DEFAULT);
-
-	if (strlen(CONFIG_MTDPARTS_DEFAULT))
-		env_set("mtdparts", CONFIG_MTDPARTS_DEFAULT);
-#endif
-
-	return 0;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *		hardware. Many pins need to be moved from protect to primary
- *		mode.
- */
-void set_muxconf_regs(void)
-{
-	MUX_BEAGLE();
-}
-
-#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
-{
-	return omap_mmc_init(0, 0, 0, -1, -1);
-}
-#endif
-
-#if defined(CONFIG_MMC)
-void board_mmc_power_init(void)
-{
-	twl4030_power_mmc_init(0);
-}
-#endif
-
-#if defined(CONFIG_USB_EHCI_HCD) && !defined(CONFIG_SPL_BUILD)
-/* Call usb_stop() before starting the kernel */
-void show_boot_progress(int val)
-{
-	if (val == BOOTSTAGE_ID_RUN_OS)
-		usb_stop();
-}
-
-static struct omap_usbhs_board_data usbhs_bdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(int index)
-{
-	return omap_ehci_hcd_stop();
-}
-
-#endif /* CONFIG_USB_EHCI_HCD */
-
-#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)
-int board_eth_init(bd_t *bis)
-{
-	return usb_eth_initialize(bis);
-}
-#endif
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
deleted file mode 100644
index ce78ea661b9..00000000000
--- a/board/ti/beagle/beagle.h
+++ /dev/null
@@ -1,545 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2008
- * Dirk Behme dirk.behme@gmail.com
- */
-#ifndef _BEAGLE_H_
-#define _BEAGLE_H_
-
-#include <asm/arch/dss.h>
-
-const omap3_sysinfo sysinfo = {
-	DDR_STACKED,
-	"OMAP3 Beagle board",
-#if defined(CONFIG_ENV_IS_IN_ONENAND)
-	"OneNAND",
-#else
-	"NAND",
-#endif
-};
-
-/* BeagleBoard revisions */
-#define REVISION_AXBX	0x7
-#define REVISION_CX	0x6
-#define REVISION_C4	0x5
-#define REVISION_XM_AB	0x0
-#define REVISION_XM_C	0x2
-
-/*
- * IEN  - Input Enable
- * IDIS - Input Disable
- * PTD  - Pull type Down
- * PTU  - Pull type Up
- * DIS  - Pull type selection is inactive
- * EN   - Pull type selection is active
- * M0   - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_BEAGLE() \
- /*SDRC*/\
-	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) /*SDRC_D0*/\
-	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) /*SDRC_D1*/\
-	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) /*SDRC_D2*/\
-	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) /*SDRC_D3*/\
-	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) /*SDRC_D4*/\
-	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) /*SDRC_D5*/\
-	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) /*SDRC_D6*/\
-	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) /*SDRC_D7*/\
-	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) /*SDRC_D8*/\
-	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) /*SDRC_D9*/\
-	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) /*SDRC_D10*/\
-	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) /*SDRC_D11*/\
-	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) /*SDRC_D12*/\
-	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) /*SDRC_D13*/\
-	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) /*SDRC_D14*/\
-	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) /*SDRC_D15*/\
-	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) /*SDRC_D16*/\
-	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) /*SDRC_D17*/\
-	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) /*SDRC_D18*/\
-	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) /*SDRC_D19*/\
-	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) /*SDRC_D20*/\
-	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) /*SDRC_D21*/\
-	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) /*SDRC_D22*/\
-	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) /*SDRC_D23*/\
-	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) /*SDRC_D24*/\
-	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) /*SDRC_D25*/\
-	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) /*SDRC_D26*/\
-	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) /*SDRC_D27*/\
-	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) /*SDRC_D28*/\
-	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) /*SDRC_D29*/\
-	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) /*SDRC_D30*/\
-	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) /*SDRC_D31*/\
-	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) /*SDRC_CLK*/\
-	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS0*/\
-	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS1*/\
-	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS2*/\
-	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS3*/\
- /*GPMC*/\
-	MUX_VAL(CP(GPMC_A1),		(IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
-	MUX_VAL(CP(GPMC_A2),		(IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
-	MUX_VAL(CP(GPMC_A3),		(IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
-	MUX_VAL(CP(GPMC_A4),		(IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
-	MUX_VAL(CP(GPMC_A5),		(IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
-	MUX_VAL(CP(GPMC_A6),		(IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
-	MUX_VAL(CP(GPMC_A7),		(IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
-	MUX_VAL(CP(GPMC_A8),		(IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
-	MUX_VAL(CP(GPMC_A9),		(IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
-	MUX_VAL(CP(GPMC_A10),		(IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
-	MUX_VAL(CP(GPMC_D0),		(IEN  | PTD | DIS | M0)) /*GPMC_D0*/\
-	MUX_VAL(CP(GPMC_D1),		(IEN  | PTD | DIS | M0)) /*GPMC_D1*/\
-	MUX_VAL(CP(GPMC_D2),		(IEN  | PTD | DIS | M0)) /*GPMC_D2*/\
-	MUX_VAL(CP(GPMC_D3),		(IEN  | PTD | DIS | M0)) /*GPMC_D3*/\
-	MUX_VAL(CP(GPMC_D4),		(IEN  | PTD | DIS | M0)) /*GPMC_D4*/\
-	MUX_VAL(CP(GPMC_D5),		(IEN  | PTD | DIS | M0)) /*GPMC_D5*/\
-	MUX_VAL(CP(GPMC_D6),		(IEN  | PTD | DIS | M0)) /*GPMC_D6*/\
-	MUX_VAL(CP(GPMC_D7),		(IEN  | PTD | DIS | M0)) /*GPMC_D7*/\
-	MUX_VAL(CP(GPMC_D8),		(IEN  | PTD | DIS | M0)) /*GPMC_D8*/\
-	MUX_VAL(CP(GPMC_D9),		(IEN  | PTD | DIS | M0)) /*GPMC_D9*/\
-	MUX_VAL(CP(GPMC_D10),		(IEN  | PTD | DIS | M0)) /*GPMC_D10*/\
-	MUX_VAL(CP(GPMC_D11),		(IEN  | PTD | DIS | M0)) /*GPMC_D11*/\
-	MUX_VAL(CP(GPMC_D12),		(IEN  | PTD | DIS | M0)) /*GPMC_D12*/\
-	MUX_VAL(CP(GPMC_D13),		(IEN  | PTD | DIS | M0)) /*GPMC_D13*/\
-	MUX_VAL(CP(GPMC_D14),		(IEN  | PTD | DIS | M0)) /*GPMC_D14*/\
-	MUX_VAL(CP(GPMC_D15),		(IEN  | PTD | DIS | M0)) /*GPMC_D15*/\
-	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS0*/\
-	MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS1*/\
-	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS2*/\
-	MUX_VAL(CP(GPMC_NCS3),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS3*/\
-	MUX_VAL(CP(GPMC_NCS4),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS4*/\
-	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\
-	MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTD | DIS | M1)) /*SYS_nDMA_REQ2*/\
-	MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | EN  | M1)) /*SYS_nDMA_REQ3*/\
-	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTD | DIS | M0)) /*GPMC_nBE1*/\
-	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT2*/\
-	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT3*/\
-	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
-	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
-	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
-	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
-	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\
-	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M0)) /*GPMC_nWP*/\
-	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT0*/\
-	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT1*/\
- /*DSS*/\
-	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
-	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
-	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
-	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
-	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
-	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
-	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
-	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
-	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
-	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
-	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
-	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
-	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
-	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
-	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
-	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
-	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
-	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
-	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
-	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
-	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
-	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
-	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
-	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
-	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
-	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
-	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
-	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
- /*CAMERA*/\
-	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) /*CAM_HS */\
-	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) /*CAM_VS */\
-	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\
-	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) /*CAM_PCLK*/\
-	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
-	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) /*CAM_D0*/\
-	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) /*CAM_D1*/\
-	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) /*CAM_D2*/\
-	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) /*CAM_D3*/\
-	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) /*CAM_D4*/\
-	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) /*CAM_D5*/\
-	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) /*CAM_D6*/\
-	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) /*CAM_D7*/\
-	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) /*CAM_D8*/\
-	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) /*CAM_D9*/\
-	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) /*CAM_D10*/\
-	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) /*CAM_D11*/\
-	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
-	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
-	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
-	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) /*CSI2_DX0*/\
-	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) /*CSI2_DY0*/\
-	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) /*CSI2_DX1*/\
-	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) /*CSI2_DY1*/\
- /*Audio Interface */\
-	MUX_VAL(CP(MCBSP2_FSX),		(IEN  | PTD | DIS | M0)) /*McBSP2_FSX*/\
-	MUX_VAL(CP(MCBSP2_CLKX),	(IEN  | PTD | DIS | M0)) /*McBSP2_CLKX*/\
-	MUX_VAL(CP(MCBSP2_DR),		(IEN  | PTD | DIS | M0)) /*McBSP2_DR*/\
-	MUX_VAL(CP(MCBSP2_DX),		(IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
- /*Expansion card */\
-	MUX_VAL(CP(MMC1_CLK),		(IDIS | PTU | EN  | M0)) /*MMC1_CLK*/\
-	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0)) /*MMC1_CMD*/\
-	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT0*/\
-	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT1*/\
-	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT2*/\
-	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT3*/\
-	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT4*/\
-	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT5*/\
-	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT6*/\
-	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT7*/\
- /*Wireless LAN */\
-	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN  | M4)) /*GPIO_130*/\
-	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | EN  | M4)) /*GPIO_131*/\
-	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | EN  | M4)) /*GPIO_132*/\
-	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | EN  | M4)) /*GPIO_133*/\
-	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | EN  | M4)) /*GPIO_134*/\
-	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | EN  | M4)) /*GPIO_135*/\
-	MUX_VAL(CP(MMC2_DAT4),		(IEN  | PTU | EN  | M4)) /*GPIO_136*/\
-	MUX_VAL(CP(MMC2_DAT5),		(IEN  | PTU | EN  | M4)) /*GPIO_137*/\
-	MUX_VAL(CP(MMC2_DAT6),		(IEN  | PTU | EN  | M4)) /*GPIO_138*/\
-	MUX_VAL(CP(MMC2_DAT7),		(IEN  | PTU | EN  | M4)) /*GPIO_139*/\
- /*Bluetooth*/\
-	MUX_VAL(CP(MCBSP3_DX),		(IEN  | PTD | DIS | M1)) /*UART2_CTS*/\
-	MUX_VAL(CP(MCBSP3_DR),		(IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
-	MUX_VAL(CP(MCBSP3_CLKX),	(IDIS | PTD | DIS | M1)) /*UART2_TX*/\
-	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTD | DIS | M1)) /*UART2_RX*/\
-	MUX_VAL(CP(UART2_CTS),		(IEN  | PTD | DIS | M4)) /*GPIO_144*/\
-	MUX_VAL(CP(UART2_RTS),		(IEN  | PTD | DIS | M4)) /*GPIO_145*/\
-	MUX_VAL(CP(UART2_TX),		(IEN  | PTD | DIS | M4)) /*GPIO_146*/\
-	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M4)) /*GPIO_147*/\
- /*Modem Interface */\
-	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) /*UART1_TX*/\
-	MUX_VAL(CP(UART1_RTS),		(IDIS | PTD | DIS | M4)) /*GPIO_149*/ \
-	MUX_VAL(CP(UART1_CTS),		(IDIS | PTD | DIS | M4)) /*GPIO_150*/ \
-	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) /*UART1_RX*/\
-	MUX_VAL(CP(MCBSP4_CLKX),	(IEN  | PTD | DIS | M1)) /*SSI1_DAT_RX*/\
-	MUX_VAL(CP(MCBSP4_DR),		(IEN  | PTD | DIS | M1)) /*SSI1_FLAG_RX*/\
-	MUX_VAL(CP(MCBSP4_DX),		(IEN  | PTD | DIS | M1)) /*SSI1_RDY_RX*/\
-	MUX_VAL(CP(MCBSP4_FSX),		(IEN  | PTD | DIS | M1)) /*SSI1_WAKE*/\
-	MUX_VAL(CP(MCBSP1_CLKR),	(IDIS | PTD | DIS | M4)) /*GPIO_156*/\
-	MUX_VAL(CP(MCBSP1_FSR),		(IDIS | PTU | EN  | M4)) /*GPIO_157*/\
-	MUX_VAL(CP(MCBSP1_DX),		(IDIS | PTD | DIS | M4)) /*GPIO_158*/\
-	MUX_VAL(CP(MCBSP1_DR),		(IDIS | PTD | DIS | M4)) /*GPIO_159*/\
-	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) /*McBSP_CLKS*/\
-	MUX_VAL(CP(MCBSP1_FSX),		(IDIS | PTD | DIS | M4)) /*GPIO_161*/\
-	MUX_VAL(CP(MCBSP1_CLKX),	(IDIS | PTD | DIS | M4)) /*GPIO_162*/\
- /*Serial Interface*/\
-	MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | EN  | M0)) /*UART3_CTS_RCTX*/\
-	MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\
-	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) /*UART3_RX_IRRX*/\
-	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
-	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) /*HSUSB0_CLK*/\
-	MUX_VAL(CP(HSUSB0_STP),		(IDIS | PTU | EN  | M0)) /*HSUSB0_STP*/\
-	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) /*HSUSB0_DIR*/\
-	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTD | DIS | M0)) /*HSUSB0_NXT*/\
-	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA0*/\
-	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA1*/\
-	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA2*/\
-	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA3*/\
-	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA4*/\
-	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA5*/\
-	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA6*/\
-	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA7*/\
-	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) /*I2C1_SCL*/\
-	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) /*I2C1_SDA*/\
-	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) /*I2C2_SCL*/\
-	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) /*I2C2_SDA*/\
-	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) /*I2C3_SCL*/\
-	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) /*I2C3_SDA*/\
-	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) /*I2C4_SCL*/\
-	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) /*I2C4_SDA*/\
-	MUX_VAL(CP(HDQ_SIO),		(IDIS | PTU | EN  | M4)) /*GPIO_170*/\
-	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTU | EN  | M4)) /*GPIO_171*/\
-	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTU | EN  | M4)) /*GPIO_172*/\
-	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTU | EN  | M4)) /*GPIO_173*/\
-	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) /*McSPI1_CS0*/\
-	MUX_VAL(CP(MCSPI1_CS1),		(IDIS | PTD | EN  | M0)) /*McSPI1_CS1*/\
-	MUX_VAL(CP(MCSPI1_CS2),		(IDIS | PTD | DIS | M4)) /*GPIO_176*/\
- /* USB EHCI (port 2) */\
-	MUX_VAL(CP(MCSPI1_CS3),		(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA2*/\
-	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA7*/\
-	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA4*/\
-	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA5*/\
-	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA6*/\
-	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA3*/\
-	MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\
-	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\
-	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | EN  | M3)) /*HSUSB2_DIR*/\
-	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | EN  | M3)) /*HSUSB2_NXT*/\
-	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA0*/\
-	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | EN  | M3)) /*HSUSB2_DATA1*/\
- /*Control and debug */\
-	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) /*SYS_32K*/\
-	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) /*SYS_CLKREQ*/\
-	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) /*SYS_nIRQ*/\
-	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /*GPIO_2*/\
-	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /*GPIO_3*/\
-	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /*GPIO_4 - MMC1_WP*/\
-	MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /*GPIO_5*/\
-	MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /*GPIO_6*/\
-	MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
-	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /*GPIO_8*/ \
-	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
-	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) /*SYS_CLKOUT1*/\
-	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M4)) /*GPIO_186*/\
-	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | EN  | M3)) /*HSUSB1_STP*/\
-	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\
-	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA0*/\
-	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA1*/\
-	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA2*/\
-	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA7*/\
-	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA4*/\
-	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA5*/\
-	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA6*/\
-	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA3*/\
-	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DIR*/\
-	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_NXT*/\
-	MUX_VAL(CP(D2D_MCAD1),		(IEN  | PTD | EN  | M0)) /*d2d_mcad1*/\
-	MUX_VAL(CP(D2D_MCAD2),		(IEN  | PTD | EN  | M0)) /*d2d_mcad2*/\
-	MUX_VAL(CP(D2D_MCAD3),		(IEN  | PTD | EN  | M0)) /*d2d_mcad3*/\
-	MUX_VAL(CP(D2D_MCAD4),		(IEN  | PTD | EN  | M0)) /*d2d_mcad4*/\
-	MUX_VAL(CP(D2D_MCAD5),		(IEN  | PTD | EN  | M0)) /*d2d_mcad5*/\
-	MUX_VAL(CP(D2D_MCAD6),		(IEN  | PTD | EN  | M0)) /*d2d_mcad6*/\
-	MUX_VAL(CP(D2D_MCAD7),		(IEN  | PTD | EN  | M0)) /*d2d_mcad7*/\
-	MUX_VAL(CP(D2D_MCAD8),		(IEN  | PTD | EN  | M0)) /*d2d_mcad8*/\
-	MUX_VAL(CP(D2D_MCAD9),		(IEN  | PTD | EN  | M0)) /*d2d_mcad9*/\
-	MUX_VAL(CP(D2D_MCAD10),		(IEN  | PTD | EN  | M0)) /*d2d_mcad10*/\
-	MUX_VAL(CP(D2D_MCAD11),		(IEN  | PTD | EN  | M0)) /*d2d_mcad11*/\
-	MUX_VAL(CP(D2D_MCAD12),		(IEN  | PTD | EN  | M0)) /*d2d_mcad12*/\
-	MUX_VAL(CP(D2D_MCAD13),		(IEN  | PTD | EN  | M0)) /*d2d_mcad13*/\
-	MUX_VAL(CP(D2D_MCAD14),		(IEN  | PTD | EN  | M0)) /*d2d_mcad14*/\
-	MUX_VAL(CP(D2D_MCAD15),		(IEN  | PTD | EN  | M0)) /*d2d_mcad15*/\
-	MUX_VAL(CP(D2D_MCAD16),		(IEN  | PTD | EN  | M0)) /*d2d_mcad16*/\
-	MUX_VAL(CP(D2D_MCAD17),		(IEN  | PTD | EN  | M0)) /*d2d_mcad17*/\
-	MUX_VAL(CP(D2D_MCAD18),		(IEN  | PTD | EN  | M0)) /*d2d_mcad18*/\
-	MUX_VAL(CP(D2D_MCAD19),		(IEN  | PTD | EN  | M0)) /*d2d_mcad19*/\
-	MUX_VAL(CP(D2D_MCAD20),		(IEN  | PTD | EN  | M0)) /*d2d_mcad20*/\
-	MUX_VAL(CP(D2D_MCAD21),		(IEN  | PTD | EN  | M0)) /*d2d_mcad21*/\
-	MUX_VAL(CP(D2D_MCAD22),		(IEN  | PTD | EN  | M0)) /*d2d_mcad22*/\
-	MUX_VAL(CP(D2D_MCAD23),		(IEN  | PTD | EN  | M0)) /*d2d_mcad23*/\
-	MUX_VAL(CP(D2D_MCAD24),		(IEN  | PTD | EN  | M0)) /*d2d_mcad24*/\
-	MUX_VAL(CP(D2D_MCAD25),		(IEN  | PTD | EN  | M0)) /*d2d_mcad25*/\
-	MUX_VAL(CP(D2D_MCAD26),		(IEN  | PTD | EN  | M0)) /*d2d_mcad26*/\
-	MUX_VAL(CP(D2D_MCAD27),		(IEN  | PTD | EN  | M0)) /*d2d_mcad27*/\
-	MUX_VAL(CP(D2D_MCAD28),		(IEN  | PTD | EN  | M0)) /*d2d_mcad28*/\
-	MUX_VAL(CP(D2D_MCAD29),		(IEN  | PTD | EN  | M0)) /*d2d_mcad29*/\
-	MUX_VAL(CP(D2D_MCAD30),		(IEN  | PTD | EN  | M0)) /*d2d_mcad30*/\
-	MUX_VAL(CP(D2D_MCAD31),		(IEN  | PTD | EN  | M0)) /*d2d_mcad31*/\
-	MUX_VAL(CP(D2D_MCAD32),		(IEN  | PTD | EN  | M0)) /*d2d_mcad32*/\
-	MUX_VAL(CP(D2D_MCAD33),		(IEN  | PTD | EN  | M0)) /*d2d_mcad33*/\
-	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) /*d2d_mcad34*/\
-	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) /*d2d_mcad35*/\
-	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) /*d2d_mcad36*/\
-	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) /*d2d_clk26mi*/\
-	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) /*d2d_nrespwron*/\
-	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) /*d2d_nreswarm */\
-	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) /*d2d_arm9nirq */\
-	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\
-	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) /*d2d_spint*/\
-	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) /*d2d_frint*/\
-	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq0*/\
-	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq1*/\
-	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq2*/\
-	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq3*/\
-	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtrst*/\
-	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtdi*/\
-	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtdo*/\
-	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtms*/\
-	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtck*/\
-	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) /*d2d_n3grtck*/\
-	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) /*d2d_mstdby*/\
-	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) /*d2d_swakeup*/\
-	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) /*d2d_idlereq*/\
-	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) /*d2d_idleack*/\
-	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) /*d2d_mwrite*/\
-	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) /*d2d_swrite*/\
-	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) /*d2d_mread*/\
-	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) /*d2d_sread*/\
-	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_mbusflag*/\
-	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_sbusflag*/\
-	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
-	MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTU | EN  | M0)) /*sdrc_cke1*/
-
-#define MUX_BEAGLE_C() \
-	MUX_VAL(CP(MCBSP3_DX),		(IEN  | PTD | DIS | M4)) /*GPIO_140*/\
-	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTD | DIS | M4)) /*GPIO_142*/\
-	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTD | DIS | M4)) /*GPIO_141*/\
-	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) /*UART2_CTS*/\
-	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
-	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) /*UART2_TX*/\
-	MUX_VAL(CP(UART2_RX),		(IDIS | PTU | EN  | M4)) /*GPIO_147*/
-
-#define MUX_BEAGLE_XM() \
-	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTD | EN  | M4)) /*GPIO_56*/\
-	MUX_VAL(CP(GPMC_WAIT1),		(IDIS | PTU | EN  | M4)) /*GPIO_63*/\
-	MUX_VAL(CP(MMC1_DAT7),		(IDIS | PTU | EN  | M4)) /*GPIO_129*/\
-	MUX_VAL(CP(HDQ_SIO),		(IDIS | PTU | EN  | M4)) /*GPIO_170*/\
-	MUX_VAL(CP(MCBSP3_DX),		(IEN  | PTD | DIS | M4)) /*GPIO_140*/\
-	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTD | DIS | M4)) /*GPIO_142*/\
-	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTD | DIS | M4)) /*GPIO_141*/\
-	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) /*UART2_CTS*/\
-	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
-	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) /*UART2_TX*/\
-	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M7)) /*safe_mode*/\
-	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M7)) /*safe_mode*/\
-	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M7)) /*safe_mode*/\
-	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M7)) /*safe_mode*/\
-	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M7)) /*safe_mode*/\
-	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M7)) /*safe_mode*/\
-	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M3)) /*DSS_DATA0*/\
-	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M3)) /*DSS_DATA1*/\
-	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M3)) /*DSS_DATA2*/\
-	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M3)) /*DSS_DATA3*/\
-	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M3)) /*DSS_DATA4*/\
-	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M3)) /*DSS_DATA5*/\
-	MUX_VAL(CP(SYS_BOOT0),		(IDIS | PTD | DIS | M3)) /*DSS_DATA18*/\
-	MUX_VAL(CP(SYS_BOOT1),		(IDIS | PTD | DIS | M3)) /*DSS_DATA19*/\
-	MUX_VAL(CP(SYS_BOOT3),		(IDIS | PTD | DIS | M3)) /*DSS_DATA20*/\
-	MUX_VAL(CP(SYS_BOOT4),		(IDIS | PTD | DIS | M3)) /*DSS_DATA21*/\
-	MUX_VAL(CP(SYS_BOOT5),		(IDIS | PTD | DIS | M3)) /*DSS_DATA22*/\
-	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M3)) /*DSS_DATA23*/
-
-#define MUX_TINCANTOOLS_ZIPPY() \
-	MUX_VAL(CP(MMC2_CLK),       (IEN  | PTU | EN  | M0)) /*MMC2_CLK*/\
-	MUX_VAL(CP(MMC2_CMD),       (IEN  | PTU | EN  | M0)) /*MMC2_CMD*/\
-	MUX_VAL(CP(MMC2_DAT0),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT0*/\
-	MUX_VAL(CP(MMC2_DAT1),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT1*/\
-	MUX_VAL(CP(MMC2_DAT2),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT2*/\
-	MUX_VAL(CP(MMC2_DAT3),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT3*/\
-	MUX_VAL(CP(MMC2_DAT4),      (IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT0*/\
-	MUX_VAL(CP(MMC2_DAT5),      (IEN  | PTU | EN  | M1)) /*MMC2_DIR_DAT1*/\
-	MUX_VAL(CP(MMC2_DAT6),      (IEN  | PTU | EN  | M1)) /*MMC2_DIR_CMD*/\
-	MUX_VAL(CP(MMC2_DAT7),      (IEN  | PTU | EN  | M1)) /*MMC2_CLKIN*/\
-	MUX_VAL(CP(MCBSP1_CLKR),    (IEN  | PTU | EN  | M1)) /*MCSPI4_CLK*/\
-	MUX_VAL(CP(MCBSP1_FSR),     (IEN  | PTU | EN  | M4)) /*GPIO_157*/\
-	MUX_VAL(CP(MCBSP1_DX),      (IEN  | PTD | EN  | M1)) /*MCSPI4_SIMO*/\
-	MUX_VAL(CP(MCBSP1_DR),      (IEN  | PTD | DIS | M1)) /*MCSPI4_SOMI*/\
-	MUX_VAL(CP(MCBSP1_FSX),     (IEN  | PTD | EN  | M1)) /*MCSPI4_CS0*/\
-	MUX_VAL(CP(MCBSP1_CLKX),    (IEN  | PTD | DIS | M4)) /*GPIO_162*/\
-	MUX_VAL(CP(MCBSP3_DX),      (IEN  | PTD | DIS | M4)) /*GPIO_140*/\
-	MUX_VAL(CP(MCBSP3_DR),      (IEN  | PTD | DIS | M4)) /*GPIO_142*/\
-	MUX_VAL(CP(MCBSP3_CLKX),    (IEN  | PTD | DIS | M4)) /*GPIO_141*/
-
-#define MUX_TINCANTOOLS_TRAINER() \
-	MUX_VAL(CP(MMC2_CLK),       (IEN  | PTU | EN  | M4)) /*GPIO_130*/\
-	MUX_VAL(CP(MMC2_CMD),       (IEN  | PTU | EN  | M4)) /*GPIO_131*/\
-	MUX_VAL(CP(MMC2_DAT0),      (IEN  | PTU | EN  | M4)) /*GPIO_132*/\
-	MUX_VAL(CP(MMC2_DAT1),      (IEN  | PTU | EN  | M4)) /*GPIO_133*/\
-	MUX_VAL(CP(MMC2_DAT2),      (IEN  | PTU | EN  | M4)) /*GPIO_134*/\
-	MUX_VAL(CP(MMC2_DAT3),      (IEN  | PTU | EN  | M4)) /*GPIO_135*/\
-	MUX_VAL(CP(MMC2_DAT4),      (IEN  | PTU | EN  | M4)) /*GPIO_136*/\
-	MUX_VAL(CP(MMC2_DAT5),      (IEN  | PTU | EN  | M4)) /*GPIO_137*/\
-	MUX_VAL(CP(MMC2_DAT6),      (IEN  | PTU | EN  | M4)) /*GPIO_138*/\
-	MUX_VAL(CP(MMC2_DAT7),      (IEN  | PTU | EN  | M4)) /*GPIO_139*/\
-	MUX_VAL(CP(MCBSP3_DX),      (IEN  | PTU | EN  | M4)) /*GPIO_140*/\
-	MUX_VAL(CP(MCBSP3_CLKX),    (IEN  | PTU | EN  | M4)) /*GPIO_141*/\
-	MUX_VAL(CP(MCBSP1_CLKX),    (IEN  | PTU | EN  | M4)) /*GPIO_162*/
-
-#define MUX_KBADC_BEAGLEFPGA() \
-	MUX_VAL(CP(MCBSP1_CLKR),    (IEN  | PTU | DIS | M1)) /*MCSPI4_CLK*/\
-	MUX_VAL(CP(MCBSP1_DX),      (IDIS | PTU | DIS | M1)) /*MCSPI4_SIMO*/\
-	MUX_VAL(CP(MCBSP1_DR),      (IEN  | PTU | EN  | M1)) /*MCSPI4_SOMI*/\
-	MUX_VAL(CP(MCBSP1_FSX),     (IDIS | PTU | DIS | M1)) /*MCSPI4_CS0*/
-
-#define MUX_BBTOYS_WIFI() \
-	MUX_VAL(CP(MMC2_CLK),       (IEN  | PTU | EN  | M0)) /*MMC2_CLK*/\
-	MUX_VAL(CP(MMC2_CMD),       (IEN  | PTU | EN  | M0)) /*MMC2_CMD*/\
-	MUX_VAL(CP(MMC2_DAT0),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT0*/\
-	MUX_VAL(CP(MMC2_DAT1),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT1*/\
-	MUX_VAL(CP(MMC2_DAT2),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT2*/\
-	MUX_VAL(CP(MMC2_DAT3),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT3*/\
-	MUX_VAL(CP(MMC2_DAT4),      (IDIS | PTU | EN  | M4)) /*GPIO_136 FM_EN/BT_WU*/\
-	MUX_VAL(CP(MMC2_DAT5),      (IEN  | PTU | EN  | M4)) /*GPIO_137 WLAN_IRQ*/\
-	MUX_VAL(CP(MMC2_DAT6),      (IDIS | PTU | EN  | M4)) /*GPIO_138 BT_EN*/\
-	MUX_VAL(CP(MMC2_DAT7),      (IDIS | PTU | EN  | M4)) /*GPIO_139 WLAN_EN*/
-
-/*
- * Display Configuration
- */
-
-#define DVI_BEAGLE_ORANGE_COL		0x00FF8000
-#define VENC_HEIGHT			0x00ef
-#define VENC_WIDTH			0x027f
-
-/*
- * Configure VENC in DSS for Beagle to generate Color Bar
- *
- * Kindly refer to OMAP TRM for definition of these values.
- */
-static const struct venc_regs venc_config_std_tv = {
-	.status					= 0x0000001B,
-	.f_control				= 0x00000040,
-	.vidout_ctrl				= 0x00000000,
-	.sync_ctrl				= 0x00008000,
-	.llen					= 0x00008359,
-	.flens					= 0x0000020C,
-	.hfltr_ctrl				= 0x00000000,
-	.cc_carr_wss_carr			= 0x043F2631,
-	.c_phase				= 0x00000024,
-	.gain_u					= 0x00000130,
-	.gain_v					= 0x00000198,
-	.gain_y					= 0x000001C0,
-	.black_level				= 0x0000006A,
-	.blank_level				= 0x0000005C,
-	.x_color				= 0x00000000,
-	.m_control				= 0x00000001,
-	.bstamp_wss_data			= 0x0000003F,
-	.s_carr					= 0x21F07C1F,
-	.line21					= 0x00000000,
-	.ln_sel					= 0x00000015,
-	.l21__wc_ctl				= 0x00001400,
-	.htrigger_vtrigger			= 0x00000000,
-	.savid__eavid				= 0x069300F4,
-	.flen__fal				= 0x0016020C,
-	.lal__phase_reset			= 0x00060107,
-	.hs_int_start_stop_x			= 0x008D034E,
-	.hs_ext_start_stop_x			= 0x000F0359,
-	.vs_int_start_x				= 0x01A00000,
-	.vs_int_stop_x__vs_int_start_y		= 0x020501A0,
-	.vs_int_stop_y__vs_ext_start_x		= 0x01AC0024,
-	.vs_ext_stop_x__vs_ext_start_y		= 0x020D01AC,
-	.vs_ext_stop_y				= 0x00000006,
-	.avid_start_stop_x			= 0x03480079,
-	.avid_start_stop_y			= 0x02040024,
-	.fid_int_start_x__fid_int_start_y	= 0x0001008A,
-	.fid_int_offset_y__fid_ext_start_x	= 0x01AC0106,
-	.fid_ext_start_y__fid_ext_offset_y	= 0x01060006,
-	.tvdetgp_int_start_stop_x		= 0x00140001,
-	.tvdetgp_int_start_stop_y		= 0x00010001,
-	.gen_ctrl				= 0x00FF0000,
-	.output_control				= 0x0000000D,
-	.dac_b__dac_c				= 0x00000000
-};
-
-/*
- * Configure Timings for DVI D
- */
-static const struct panel_config dvid_cfg = {
-	.timing_h	= 0x0ff03f31, /* Horizontal timing */
-	.timing_v	= 0x01400504, /* Vertical timing */
-	.pol_freq	= 0x00007028, /* Pol Freq */
-	.divisor	= 0x00010006, /* 72Mhz Pixel Clock */
-	.lcd_size	= 0x02ff03ff, /* 1024x768 */
-	.panel_type	= 0x01, /* TFT */
-	.data_lines	= 0x03, /* 24 Bit RGB */
-	.load_mode	= 0x02, /* Frame Mode */
-	.panel_color	= DVI_BEAGLE_ORANGE_COL, /* ORANGE */
-	.gfx_format	= GFXFORMAT_RGB24_UNPACKED,
-};
-
-static const struct panel_config dvid_cfg_xm = {
-	.timing_h	= 0x1a4024c9, /* Horizontal timing */
-	.timing_v	= 0x02c00509, /* Vertical timing */
-	.pol_freq	= 0x00007028, /* Pol Freq */
-	.divisor	= 0x00010001, /* 96MHz Pixel Clock */
-	.lcd_size	= 0x02ff03ff, /* 1024x768 */
-	.panel_type	= 0x01, /* TFT */
-	.data_lines	= 0x03, /* 24 Bit RGB */
-	.load_mode	= 0x02, /* Frame Mode */
-	.panel_color	= DVI_BEAGLE_ORANGE_COL, /* ORANGE */
-	.gfx_format	= GFXFORMAT_RGB24_UNPACKED,
-};
-#endif
diff --git a/board/ti/beagle/led.c b/board/ti/beagle/led.c
deleted file mode 100644
index e21c0169db7..00000000000
--- a/board/ti/beagle/led.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (c) 2010 Texas Instruments, Inc.
- * Jason Kridner jkridner@beagleboard.org
- */
-#include <common.h>
-#include <status_led.h>
-#include <asm/arch/cpu.h>
-#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-
-/* GPIO pins for the LEDs */
-#define BEAGLE_LED_USR0	150
-#define BEAGLE_LED_USR1	149
-
-#ifdef CONFIG_LED_STATUS_GREEN
-void green_led_off(void)
-{
-	__led_set(CONFIG_LED_STATUS_GREEN, 0);
-}
-
-void green_led_on(void)
-{
-	__led_set(CONFIG_LED_STATUS_GREEN, 1);
-}
-#endif
-
-static int get_led_gpio(led_id_t mask)
-{
-#ifdef CONFIG_LED_STATUS0
-	if (CONFIG_LED_STATUS_BIT & mask)
-		return BEAGLE_LED_USR0;
-#endif
-#ifdef CONFIG_LED_STATUS1
-	if (CONFIG_LED_STATUS_BIT1 & mask)
-		return BEAGLE_LED_USR1;
-#endif
-
-	return 0;
-}
-
-void __led_init (led_id_t mask, int state)
-{
-	int toggle_gpio;
-
-	toggle_gpio = get_led_gpio(mask);
-
-	if (toggle_gpio && !gpio_request(toggle_gpio, "led"))
-		__led_set(mask, state);
-}
-
-void __led_toggle (led_id_t mask)
-{
-	int state, toggle_gpio;
-
-	toggle_gpio = get_led_gpio(mask);
-	if (toggle_gpio) {
-		state = gpio_get_value(toggle_gpio);
-		gpio_direction_output(toggle_gpio, !state);
-	}
-}
-
-void __led_set (led_id_t mask, int state)
-{
-	int toggle_gpio;
-
-	toggle_gpio = get_led_gpio(mask);
-	if (toggle_gpio)
-		gpio_direction_output(toggle_gpio, state);
-}
diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig
deleted file mode 100644
index 4fb8aec57db..00000000000
--- a/configs/omap3_beagle_defconfig
+++ /dev/null
@@ -1,82 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_SYS_TEXT_BASE=0x80100000
-CONFIG_TARGET_OMAP3_BEAGLE=y
-CONFIG_SPL=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_DEFAULT_FDT_FILE="omap3-beagle.dtb"
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_SPL_EXT_SUPPORT is not set
-CONFIG_SPL_MTD_SUPPORT=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_PROMPT="BeagleBoard # "
-CONFIG_CMD_SPL=y
-CONFIG_CMD_SPL_NAND_OFS=0x280000
-CONFIG_CMD_SPL_WRITE_SIZE=0x20000
-CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FS_UUID=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)"
-CONFIG_CMD_UBI=y
-# CONFIG_ISO_PARTITION is not set
-CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="omap3-beagle"
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SPL_DM=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x82000000
-CONFIG_LED_STATUS=y
-CONFIG_LED_STATUS0=y
-CONFIG_LED_STATUS_BIT=1
-CONFIG_LED_STATUS_STATE=2
-CONFIG_LED_STATUS1=y
-CONFIG_LED_STATUS_BIT1=2
-CONFIG_LED_STATUS_STATE1=2
-CONFIG_LED_STATUS_BOOT_ENABLE=y
-CONFIG_LED_STATUS_BOOT=1
-CONFIG_LED_STATUS_GREEN_ENABLE=y
-CONFIG_LED_STATUS_GREEN=2
-CONFIG_LED_STATUS_CMD=y
-CONFIG_TWL4030_LED=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_NAND=y
-CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
-CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
-CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
-CONFIG_SPL_NAND_SIMPLE=y
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OMAP3=y
-CONFIG_USB_MUSB_GADGET=y
-CONFIG_USB_MUSB_OMAP2PLUS=y
-CONFIG_TWL4030_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="TI"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0451
-CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
-CONFIG_USB_ETHER=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_USB_ETHER_MCS7830=y
-CONFIG_USB_ETHER_SMSC95XX=y
-CONFIG_VIDEO_OMAP3=y
-CONFIG_FAT_WRITE=y
-CONFIG_BCH=y
-CONFIG_SPL_OF_LIBFDT=y
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
deleted file mode 100644
index 7698a90c4e9..00000000000
--- a/include/configs/omap3_beagle.h
+++ /dev/null
@@ -1,233 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2006-2008
- * Texas Instruments.
- * Richard Woodruff r-woodruff2@ti.com
- * Syed Mohammed Khasim x0khasim@ti.com
- *
- * Configuration settings for the TI OMAP3530 Beagle board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/ti_omap3_common.h>
-
-/*
- * We are only ever GP parts and will utilize all of the "downloaded image"
- * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
- */
-#undef CONFIG_SPL_TEXT_BASE
-#define CONFIG_SPL_TEXT_BASE            0x40200000
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
-/* NAND */
-#if defined(CONFIG_NAND)
-#define CONFIG_SYS_FLASH_BASE		NAND_BASE
-#define CONFIG_SYS_MAX_NAND_DEVICE      1
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT      64
-#define CONFIG_SYS_NAND_PAGE_SIZE       2048
-#define CONFIG_SYS_NAND_OOBSIZE         64
-#define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
-                                         10, 11, 12, 13}
-#define CONFIG_SYS_NAND_ECCSIZE         512
-#define CONFIG_SYS_NAND_ECCBYTES        3
-#define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
-#define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
-#define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
-#define CONFIG_ENV_OFFSET               0x260000
-#define CONFIG_ENV_ADDR                 0x260000
-#define CONFIG_ENV_OVERWRITE
-/* NAND: SPL falcon mode configs */
-#if defined(CONFIG_SPL_OS_BOOT)
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
-#endif /* CONFIG_SPL_OS_BOOT */
-#endif /* CONFIG_NAND */
-
-/* USB EHCI */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	147
-
-/* Enable Multi Bus support for I2C */
-#define CONFIG_I2C_MULTI_BUS
-
-/* DSS Support */
-
-/* TWL4030 LED Support */
-
-/* Environment */
-#define CONFIG_ENV_SIZE                 SZ_128K
-
-#define CONFIG_PREBOOT                  "usb start"
-
-#define MEM_LAYOUT_ENV_SETTINGS \
-	DEFAULT_LINUX_BOOT_ENV
-
-#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
-	"bootcmd_" #devtypel #instance "=" \
-	"setenv mmcdev " #instance "; " \
-	"run mmcboot\0"
-#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
-	#devtypel #instance " "
-
-#if defined(CONFIG_NAND)
-
-#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
-	"bootcmd_" #devtypel #instance "=" \
-	"if test ${mtdids} = '' || test ${mtdparts} = '' ; then " \
-		"echo NAND boot disabled: No mtdids and/or mtdparts; " \
-	"else " \
-		"run nandboot; " \
-	"fi\0"
-#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
-	#devtypel #instance " "
-
-#define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
-	func(LEGACY_MMC, legacy_mmc, 0) \
-	func(UBIFS, ubifs, 0) \
-	func(NAND, nand, 0)
-
-#else /* !CONFIG_NAND */
-
-#define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
-	func(LEGACY_MMC, legacy_mmc, 0)
-
-#endif /* CONFIG_NAND */
-
-#include <config_distro_bootcmd.h>
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	MEM_LAYOUT_ENV_SETTINGS \
-	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"fdt_high=0xffffffff\0" \
-	"console=ttyO2,115200n8\0" \
-	"bootdir=/boot\0" \
-	"bootenv=uEnv.txt\0" \
-	"bootfile=zImage\0" \
-	"bootpart=0:2\0" \
-	"bootubivol=rootfs\0" \
-	"bootubipart=rootfs\0" \
-	"usbtty=cdc_acm\0" \
-	"mpurate=auto\0" \
-	"buddy=none\0" \
-	"camera=none\0" \
-	"vram=12M\0" \
-	"dvimode=640x480MR-16@60\0" \
-	"defaultdisplay=dvi\0" \
-	"defaultargs=setenv defargs " \
-		"mpurate=${mpurate} " \
-		"buddy=${buddy} "\
-		"camera=${camera} "\
-		"vram=${vram} " \
-		"omapfb.mode=dvi:${dvimode} " \
-		"omapdss.def_disp=${defaultdisplay}\0" \
-	"optargs=\0" \
-	"findfdt=" \
-		"if test $beaglerev = AxBx; then " \
-			"setenv fdtfile omap3-beagle.dtb; fi; " \
-		"if test $beaglerev = Cx; then " \
-			"setenv fdtfile omap3-beagle.dtb; fi; " \
-		"if test $beaglerev = C4; then " \
-			"setenv fdtfile omap3-beagle.dtb; fi; " \
-		"if test $beaglerev = xMAB; then " \
-			"setenv fdtfile omap3-beagle-xm-ab.dtb; fi; " \
-		"if test $beaglerev = xMC; then " \
-			"setenv fdtfile omap3-beagle-xm.dtb; fi; " \
-		"if test $fdtfile = undefined; then " \
-			"echo WARNING: Could not determine device tree to use; fi\0" \
-	"mmcdev=0\0" \
-	"mmcpart=2\0" \
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext4 rootwait\0" \
-	"mmcargs=run defaultargs; setenv bootargs console=${console} " \
-		"${mtdparts} " \
-		"${defargs} " \
-		"${optargs} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"userbutton_xm=gpio input 4;\0" \
-	"userbutton_nonxm=gpio input 7;\0" \
-	"userbutton=if gpio input 173; then " \
-			"run userbutton_xm; " \
-		"else " \
-			"run userbutton_nonxm; " \
-		"fi;\0" \
-	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-	"ext4bootenv=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootenv}\0" \
-	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
-		"env import -t ${loadaddr} ${filesize}\0" \
-	"mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \
-		"mmc dev ${mmcdev}; " \
-		"if mmc rescan; then " \
-			"if run userbutton; then " \
-				"setenv bootenv uEnv.txt;" \
-			"else " \
-				"setenv bootenv user.txt;" \
-			"fi;" \
-			"run loadbootenv && run importbootenv; " \
-			"run ext4bootenv && run importbootenv; " \
-			"if test -n $uenvcmd; then " \
-				"echo Running uenvcmd ...; " \
-				"run uenvcmd; " \
-			"fi; " \
-		"fi\0" \
-	"validatefdt=" \
-		"if test $beaglerev = xMAB; then " \
-			"if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
-				"setenv fdtfile omap3-beagle-xm.dtb; " \
-			"fi; " \
-		"fi; \0" \
-	"loadimage=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loaddtb=run validatefdt; ext4load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"mmcboot=run mmcbootenv; " \
-		"if run loadimage && run loaddtb; then " \
-			"echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} ...; " \
-			"run mmcargs; " \
-			"if test ${bootfile} = uImage; then " \
-				"bootm ${loadaddr} - ${fdtaddr}; " \
-			"fi; " \
-			"if test ${bootfile} = zImage; then " \
-				"bootz ${loadaddr} - ${fdtaddr}; " \
-			"fi; " \
-		"fi\0" \
-	"nandroot=ubi0:rootfs ubi.mtd=rootfs rw\0" \
-	"nandrootfstype=ubifs rootwait\0" \
-	"nandargs=run defaultargs; setenv bootargs console=${console} " \
-		"${mtdparts} " \
-		"${defargs} " \
-		"${optargs} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype}\0" \
-	"nandboot=if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb; then " \
-			"echo Booting uImage from NAND MTD 'kernel' partition ...; " \
-			"run nandargs; " \
-			"bootm ${loadaddr} - ${fdtaddr}; " \
-		"fi\0" \
-	"loadramdisk=ext4load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
-	"ramdisk=rootfs.ext2.gz.uboot\0" \
-	"ramdisk_size=16384\0" \
-	"ramroot=/dev/ram rw\0" \
-	"ramrootfstype=ext2\0" \
-	"ramargs=run defaultargs; setenv bootargs console=${console} " \
-		"${mtdparts} " \
-		"${defargs} " \
-		"${optargs} " \
-		"root=${ramroot} ramdisk_size=${ramdisk_size} " \
-	 	"rootfstype=${ramrootfstype}\0" \
-	"ramboot=run mmcbootenv; " \
-		"if run loadimage && run loaddtb && run loadramdisk; then " \
-			"echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} w/ramdisk ...; " \
-			"run ramargs; " \
-			"bootz ${loadaddr} ${rdaddr} ${fdtaddr}; " \
-		"fi\0" \
-	BOOTENV
-
-#endif /* __CONFIG_H */
-- 
2.19.1.1215.g8438c0b245-goog


    