Hi Ye,
On 19/01/2016 14:16, Ye Li wrote:
The i.MX6SX and i.MX6UL has two ENET controllers, add support for reading MAC address from fuse for ENET2.
Signed-off-by: Ye Li ye.li@nxp.com
arch/arm/cpu/armv7/mx6/soc.c | 32 +++++++++++++++++++++-------- arch/arm/include/asm/arch-mx6/imx-regs.h | 19 +---------------- 2 files changed, 24 insertions(+), 27 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index bf5ae8c..e521bf2 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -364,15 +364,29 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) struct fuse_bank4_regs *fuse = (struct fuse_bank4_regs *)bank->fuse_regs;
- u32 value = readl(&fuse->mac_addr_high);
- mac[0] = (value >> 8);
- mac[1] = value ;
- value = readl(&fuse->mac_addr_low);
- mac[2] = value >> 24 ;
- mac[3] = value >> 16 ;
- mac[4] = value >> 8 ;
- mac[5] = value ;
I beg your pardon, but I need your help to better understand it with the manual. References are Application Processor manual for MX6Q and MX6X.
Currently, we support loading the MAC address from fuses (all other i.MX6 with just one FEC) reading the fuses MAC_ADDRESS[31:0] and MAC_ADDRESS[47:32] as stated, for example, in Table 5-19 for i.MX6Q.
In i.MX6SX manual, there is no an additional entry for the second MAC address, and in my understanding GP1[31:0] is used. This is ok if we agree on that, but it should be documented in doc/README.imx6, that already explains the case with a single controller
- if ((is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL)) &&
1 == dev_id) {u32 value = readl(&fuse->mac_addr2);mac[0] = value >> 24 ;mac[1] = value >> 16 ;mac[2] = value >> 8 ;mac[3] = value ;value = readl(&fuse->mac_addr_high);mac[4] = value >> 24 ;mac[5] = value >> 16 ;
I admit I have not understood why the order is exchanged. Should be mac_addr_high not be identical to the two controllers, and just the lower part different ? Here mac_addr_high goes into mac[4,5], while for id = 0 it goes into mac[0,1]. Do I miss something ? Or is the manual not updated ?
- } else {
u32 value = readl(&fuse->mac_addr_high);mac[0] = (value >> 8);mac[1] = value ;value = readl(&fuse->mac_addr_low);mac[2] = value >> 24 ;mac[3] = value >> 16 ;mac[4] = value >> 8 ;mac[5] = value ;- }
} #endif diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index f24525e..d0324a0 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -715,7 +715,6 @@ struct fuse_bank1_regs { u32 rsvd7[3]; };
-#if (defined(CONFIG_MX6SX) || defined(CONFIG_MX6UL)) struct fuse_bank4_regs { u32 sjc_resp_low; u32 rsvd0[3]; @@ -725,29 +724,13 @@ struct fuse_bank4_regs { u32 rsvd2[3]; u32 mac_addr_high; u32 rsvd3[3];
- u32 mac_addr2;
- u32 mac_addr2; /*For i.MX6SX and i.MX6UL*/ u32 rsvd4[7]; u32 gp1; u32 rsvd5[3]; u32 gp2; u32 rsvd6[3];
}; -#else -struct fuse_bank4_regs {
- u32 sjc_resp_low;
- u32 rsvd0[3];
- u32 sjc_resp_high;
- u32 rsvd1[3];
- u32 mac_addr_low;
- u32 rsvd2[3];
- u32 mac_addr_high;
- u32 rsvd3[0xb];
- u32 gp1;
- u32 rsvd4[3];
- u32 gp2;
- u32 rsvd5[3];
-}; -#endif
struct aipstz_regs { u32 mprot0;
Best regards, Stefano Babic