On Mon, Nov 8, 2021 at 10:40 AM Roman Bacik roman.bacik@broadcom.com wrote:
From: Bharat Gooty bharat.gooty@broadcom.com
Broadcom bnxt L2 driver support. Used by the Broadcom iproc platforms.
Signed-off-by: Bharat Gooty bharat.gooty@broadcom.com Reviewed-by: Ramon Fried rfried.dev@gmail.com
Signed-off-by: Roman Bacik roman.bacik@broadcom.com
Changes in v9:
- remove bnxt_ver.h
- add DRIVER_VERSION_* definitions to bnxt.h
- remove pci_read_/pci_write_/pci_map_ definitions from bnxt.h
Changes in v8:
- remove PCICFG_ME_REGISTER
Changes in v7:
- move bnxt_*.h files to drivers/net/bnxt/
- remove display_banner()
- replace pci_map_bar() with dm_pci_map_bar()
- remove changes to dev->flags_
- move PCI DID and VID definitions to include/pci_ids.h
- move bnxt_nics[] to bnxt.c
- move bnxt_alloc_mem to bnxt_read_rom_hw
- return proper error codes in bnxt_read_rom_hwaddr
Changes in v6:
- remove bnxt_eth_* env variables
- clean up include headers
Changes in v5:
- remove bnxt_env_set_ethaddr/bnxt_env_del_ethaddr methods
- add .read_rom_hwaddr = bnxt_read_rom_hwaddr
- move bnxt_bring_pci/bnxt_bring_chip to bnxt_read_rom_hwddr
- move mac copy from priv to plat to bnxt_read_rom_hwaddr
Changes in v4:
- remove static num_cards and use dev_seq(dev) instead
- add .probe
- merged probe/remove methods
- select PCI_INIT_R when BNXT_ETH is selected
Changes in v3:
- change printf to debug in display_banner
- remove get/set/print mac/speed
- remove bnxt_hwrm_set_nvmem
Changes in v2:
- rebase and remove DM_PCI dependency from BNXT_ETH
- remove tautology assignment from debug_resp()
drivers/net/Kconfig | 1 + drivers/net/Makefile | 1 + drivers/net/bnxt/Kconfig | 7 + drivers/net/bnxt/Makefile | 5 + drivers/net/bnxt/bnxt.c | 1706 +++++++++++++++++++++++++++++++++++ drivers/net/bnxt/bnxt.h | 390 ++++++++ drivers/net/bnxt/bnxt_dbg.h | 536 +++++++++++ drivers/net/bnxt/bnxt_hsi.h | 889 ++++++++++++++++++ include/pci_ids.h | 3 + 9 files changed, 3538 insertions(+) create mode 100644 drivers/net/bnxt/Kconfig create mode 100644 drivers/net/bnxt/Makefile create mode 100644 drivers/net/bnxt/bnxt.c create mode 100644 drivers/net/bnxt/bnxt.h create mode 100644 drivers/net/bnxt/bnxt_dbg.h create mode 100644 drivers/net/bnxt/bnxt_hsi.h
+static int bnxt_read_rom_hwaddr(struct udevice *dev) +{
struct eth_pdata *plat = dev_get_plat(dev);struct bnxt *bp = dev_get_priv(dev);int ret;ret = bnxt_alloc_mem(bp);if (ret) {printf("*** error: bnxt_alloc_mem failed! ***\n");return ret;}bp->pdev = (struct udevice *)dev;bnxt_bring_pci(bp);ret = bnxt_bring_chip(bp);if (ret) {printf("*** error: bnxt_bring_chip failed! ***\n");return -ENODATA;}
We will move the code above back to the probe method in v10 as requested. I was wrong, there was no need to move it here. Thanks,
Roman