This patch series add networking capability to K2G ICE EVM based on netcp driver. Networking function has been tested using the latest master branch from u-boot repo. Following boot mode has been tested for networking.
Net boot (tftp images over ethernet interface and boot kernel) log at https://pastebin.ubuntu.com/p/b3nyCXPhWc/ MMC boot: (load images from boot folder of rootfs and boot kernel) log at https://pastebin.ubuntu.com/p/FWycmKd9KB/
Used Linux upstream linux kernel version 4.19.9 for the tests.
Please review and apply if this looks good.
Thanks
Revision history: v2: Collected Reviewed-by for patch 1 and 2. Rebased to latest on master
Murali Karicheri (7): ARM: k2g-ice: Add pinmux support for rgmii interface ARM: k2g-gp-evm: update to rgmii pinmux configuration net: netcp: add support for phy with rgmii ids ARM: k2g: add a workaround to reset the phy k2g: config enable ti phy dp83867 for k2g ARM: dts: k2g-evm: remove unused phy-mode property from phy node ARM: dts: k2g-ice: add dt node for netcp
arch/arm/dts/keystone-k2g-evm.dts | 1 - arch/arm/dts/keystone-k2g-ice.dts | 35 +++++++++++++ .../mach-keystone/include/mach/hardware-k2g.h | 3 ++ arch/arm/mach-keystone/include/mach/mux-k2g.h | 5 ++ board/ti/ks2_evm/board_k2g.c | 15 ++++++ board/ti/ks2_evm/mux-k2g.h | 51 +++++++++++++------ drivers/net/ti/keystone_net.c | 22 +++++++- include/configs/k2g_evm.h | 1 + 8 files changed, 116 insertions(+), 17 deletions(-)