Change pr_* to dev_ or log_ macro and define LOG_CATEGORY.
Signed-off-by: Patrick Delaunay patrick.delaunay@st.com Reviewed-by: Patrice Chotard patrice.chotard@st.com ---
(no changes since v1)
drivers/video/stm32/stm32_ltdc.c | 33 +++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/drivers/video/stm32/stm32_ltdc.c b/drivers/video/stm32/stm32_ltdc.c index 7fff735930..c5c990cc73 100644 --- a/drivers/video/stm32/stm32_ltdc.c +++ b/drivers/video/stm32/stm32_ltdc.c @@ -5,6 +5,8 @@ * Yannick Fertre yannick.fertre@st.com for STMicroelectronics. */
+#define LOG_CATEGORY UCLASS_VIDEO + #include <common.h> #include <clk.h> #include <display.h> @@ -176,13 +178,13 @@ static u32 stm32_ltdc_get_pixel_format(enum video_log2_bpp l2bpp) case VIDEO_BPP2: case VIDEO_BPP4: default: - pr_warn("%s: warning %dbpp not supported yet, %dbpp instead\n", - __func__, VNBITS(l2bpp), VNBITS(VIDEO_BPP16)); + log_warning("warning %dbpp not supported yet, %dbpp instead\n", + VNBITS(l2bpp), VNBITS(VIDEO_BPP16)); pf = PF_RGB565; break; }
- debug("%s: %d bpp -> ltdc pf %d\n", __func__, VNBITS(l2bpp), pf); + log_debug("%d bpp -> ltdc pf %d\n", VNBITS(l2bpp), pf);
return (u32)pf; } @@ -249,7 +251,7 @@ static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv,
/* Signal polarities */ val = 0; - debug("%s: timing->flags 0x%08x\n", __func__, timings->flags); + log_debug("timing->flags 0x%08x\n", timings->flags); if (timings->flags & DISPLAY_FLAGS_HSYNC_HIGH) val |= GCR_HSPOL; if (timings->flags & DISPLAY_FLAGS_VSYNC_HIGH) @@ -379,8 +381,8 @@ static int stm32_ltdc_probe(struct udevice *dev) dev_warn(dev, "fail to set pixel clock %d hz\n", timings.pixelclock.typ);
- debug("%s: Set pixel clock req %d hz get %ld hz\n", __func__, - timings.pixelclock.typ, clk_get_rate(&pclk)); + dev_dbg(dev, "Set pixel clock req %d hz get %ld hz\n", + timings.pixelclock.typ, clk_get_rate(&pclk));
ret = reset_get_by_index(dev, 0, &rst); if (ret) { @@ -394,12 +396,13 @@ static int stm32_ltdc_probe(struct udevice *dev) if (IS_ENABLED(CONFIG_VIDEO_BRIDGE)) { ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &bridge); if (ret) - debug("No video bridge, or no backlight on bridge\n"); + dev_dbg(dev, + "No video bridge, or no backlight on bridge\n");
if (bridge) { ret = video_bridge_attach(bridge); if (ret) { - dev_err(dev, "fail to attach bridge\n"); + dev_err(bridge, "fail to attach bridge\n"); return ret; } } @@ -414,12 +417,12 @@ static int stm32_ltdc_probe(struct udevice *dev) priv->crop_h = timings.vactive.typ; priv->alpha = 0xFF;
- debug("%s: %dx%d %dbpp frame buffer at 0x%lx\n", __func__, - timings.hactive.typ, timings.vactive.typ, - VNBITS(priv->l2bpp), uc_plat->base); - debug("%s: crop %d,%d %dx%d bg 0x%08x alpha %d\n", __func__, - priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h, - priv->bg_col_argb, priv->alpha); + dev_dbg(dev, "%dx%d %dbpp frame buffer at 0x%lx\n", + timings.hactive.typ, timings.vactive.typ, + VNBITS(priv->l2bpp), uc_plat->base); + dev_dbg(dev, "crop %d,%d %dx%d bg 0x%08x alpha %d\n", + priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h, + priv->bg_col_argb, priv->alpha);
/* Configure & start LTDC */ stm32_ltdc_set_mode(priv, &timings); @@ -457,7 +460,7 @@ static int stm32_ltdc_bind(struct udevice *dev) uc_plat->size = CONFIG_VIDEO_STM32_MAX_XRES * CONFIG_VIDEO_STM32_MAX_YRES * (CONFIG_VIDEO_STM32_MAX_BPP >> 3); - debug("%s: frame buffer max size %d bytes\n", __func__, uc_plat->size); + dev_dbg(dev, "frame buffer max size %d bytes\n", uc_plat->size);
return 0; }