-----Original Message----- From: Lei Wen [mailto:leiwen@marvell.com] Sent: Wednesday, October 26, 2011 7:52 AM To: Wolfgang Denk; Albert ARIBAUD; Prafulla Wadaskar; u- boot@lists.denx.de Subject: [PATCH V2] ARM: orion5x: reduce dependence of including platform file
For files like the drivers/serial/serial.c, it must include the platform file, as the CONFIG_SYS_NS16550_COM1 must reference to the definition in the platform definition files.
Include the platform definition file in the config file, so that it would decouple the dependence for the driver files.
Signed-off-by: Lei Wen leiwen@marvell.com
Changelog: V2: seperate orion5x define structure as kirkwood and armada does
arch/arm/cpu/arm926ejs/orion5x/cpu.c | 2 + arch/arm/cpu/arm926ejs/orion5x/dram.c | 1 + arch/arm/cpu/arm926ejs/orion5x/timer.c | 1 + arch/arm/include/asm/arch-orion5x/config.h | 135 ++++++++++++++++++++++ arch/arm/include/asm/arch-orion5x/orion5x.h | 6 - common/cmd_ide.c | 6 - include/configs/edminiv2.h | 166 +--------
I think you are mixing two objective in one patch here.
1. using mv-common.h for orion5x platforms. 2. orion5x: reduce dependence of including platform file (i.e. ide, serial)
May you please split them accordingly?
...snip....
diff --git a/arch/arm/include/asm/arch-orion5x/config.h b/arch/arm/include/asm/arch-orion5x/config.h new file mode 100644 index 0000000..6db3554 --- /dev/null +++ b/arch/arm/include/asm/arch-orion5x/config.h @@ -0,0 +1,135 @@ +/*
- (C) Copyright 2011
- Marvell Semiconductor <www.marvell.com>
- Written-by: Lei Wen leiwen@marvell.com
- See file CREDITS for list of people who contributed to this
- project.
- This program is free software; you can redistribute it
and/or
- modify it under the terms of the GNU General Public License
as
- published by the Free Software Foundation; either version 2
of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be
useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty
of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public
License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA
- */
+/*
- This file should be included in board config header file.
- It supports common definitions for Orion platform
- */
+#ifndef _ORION_CONFIG_H +#define _ORION_CONFIG_H
+#include <asm/arch/orion5x.h> +#define MV_UART_CONSOLE_BASE ORION5X_UART0_BASE
+/*
- Board-specific values for Orion5x MPP low level init:
- MPPs 12 to 15 are SATA LEDs (mode 5)
- Others are GPIO/unused (mode 3 for MPP0, mode 5 for
- MPP16 to MPP19, mode 0 for others
- */
+#define ORION5X_MPP0_7 0x00000003 +#define ORION5X_MPP8_15 0x55550000 +#define ORION5X_MPP16_23 0x00005555
+/*
- Board-specific values for Orion5x GPIO low level init:
- GPIO3 is input (RTC interrupt)
- GPIO16 is Power LED control (0 = on, 1 = off)
- GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
- GPIO18 is Power Button status (0 = Released, 1 = Pressed)
- Last GPIO is 26, further bits are supposed to be 0.
- Enable mask has ones for INPUT, 0 for OUTPUT.
- Default is LED ON.
- */
+#define ORION5X_GPIO_OUT_ENABLE 0x03fcffff +#define ORION5X_GPIO_OUT_VALUE 0x03fcffff
MPP and GPIO configs are specific to each board and must go to board config file
Regards.. Prafulla ..