On Sat, Feb 16, 2019 at 03:08:02PM -0600, Derald D. Woods wrote:
On Sat, Feb 16, 2019 at 03:49:01PM -0500, Tom Rini wrote:
On Sat, Feb 16, 2019 at 01:31:24PM -0600, Adam Ford wrote:
With the generic omap3-u-boot.dtsi file available, this patch increased the memory of the various incarnations of the omap3_logic board, and points their respective u-boot.dtsi files to the newly created generic one, and removes the PLATDATA from the board file.
These are all done at once because the're all utilizing the same omap3logic.c board file.
Signed-off-by: Adam Ford aford173@gmail.com
Ah-haha! Thank you! I also needed to delete the platform data and then beagleboard is also booting.
Can we get a quick summary of the conversion steps? My omap3-evm did not get a serial console when applying patch[1] and using example modifications from patch[2].
I'm cleaning up Beagle now but: - Switch to using the new omap3-u-boot.dtsi - Remove all platdata from the board files - These are a must: CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_OF_CONTROL=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_OF_TRANSLATE=y
And we tend to drop falcon mode due to size, but could find other things instead.