With the 256KB of OCRAM available to SPL now, there should be enough room to enable the pinmuxing in SPL from the device tree. This patch enables SPL_PINCTRL et al and adds the serial and usdhc pin mux references to the -u-boot.dtsi file so the pins can be configured from the device tree. Signed-off-by: Adam Ford aford173@gmail.com Reviewed-by: Fabio Estevam festevam@gmail.com Reviewed-by: Peng Fan peng.fan@nxp.com diff --git a/arch/arm/dts/imx6q-logicpd-u-boot.dtsi b/arch/arm/dts/imx6q-logicpd-u-boot.dtsi index 625bed8f7d..ee44ed91fe 100644 --- a/arch/arm/dts/imx6q-logicpd-u-boot.dtsi +++ b/arch/arm/dts/imx6q-logicpd-u-boot.dtsi @@ -16,3 +16,15 @@ &usdhc2 { u-boot,dm-spl; };
+&pinctrl_uart1 {
- u-boot,dm-spl;
+};
+&pinctrl_usdhc1 {
- u-boot,dm-spl;
+};
+&pinctrl_usdhc2 {
- u-boot,dm-spl;
+}; diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index a9e8cbea94..c120cb2f54 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -78,6 +78,7 @@ CONFIG_PHY_ATHEROS=y CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_REGULATOR=y
Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic