From: Quentin Schulz quentin.schulz@theobroma-systems.com
The SARADC is used on Jaguar for multiple things: - channel 0 is used (at runtime) as a BIOS button, - channel 2 is exposed on the Mezzanine connector for customer specific logic, - channel 5 and 6 are used for identification,
Since the SARADC requires a vref-supply provided by the RK806 PMIC, its support and the support for its regulators are also enabled.
The button, adc, pmic and regulator commands are also enabled for CLI use in U-Boot for debugging and scripting purposes.
The RK806 PMIC on Jaguar being routed on the SPI bus, let's enable Rockchip SPI controller driver.
Finally, the SARADC channel 1 on Jaguar is hardwired so will never change in the lifetime of a unit, for that reason, disable the Rockchip Download Mode check by setting ROCKCHIP_BOOT_MODE_REG symbol to 0.
Cc: Quentin Schulz foss+uboot@0leil.net Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com --- configs/jaguar-rk3588_defconfig | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/configs/jaguar-rk3588_defconfig b/configs/jaguar-rk3588_defconfig index f55bfb1c82b..4a6e1791901 100644 --- a/configs/jaguar-rk3588_defconfig +++ b/configs/jaguar-rk3588_defconfig @@ -15,6 +15,7 @@ CONFIG_ENV_SIZE=0x1f000 CONFIG_DEFAULT_DEVICE_TREE="rk3588-jaguar" CONFIG_ROCKCHIP_RK3588=y CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y +CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0 CONFIG_SPL_SERIAL=y CONFIG_SPL_STACK_R_ADDR=0x600000 CONFIG_TARGET_JAGUAR_RK3588=y @@ -47,6 +48,7 @@ CONFIG_SPL_ATF=y # CONFIG_BOOTM_RTEMS is not set # CONFIG_BOOTM_VXWORKS is not set # CONFIG_CMD_ELF is not set +CONFIG_CMD_ADC=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y @@ -59,6 +61,7 @@ CONFIG_CMD_USB=y # CONFIG_CMD_MII is not set # CONFIG_CMD_BLOCK_CACHE is not set # CONFIG_CMD_EFICONFIG is not set +CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EROFS=y CONFIG_CMD_SQUASHFS=y @@ -73,7 +76,8 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SPL_REGMAP=y CONFIG_SPL_SYSCON=y -# CONFIG_SARADC_ROCKCHIP is not set +CONFIG_BUTTON=y +CONFIG_BUTTON_ADC=y CONFIG_SPL_CLK=y CONFIG_CLK_GPIO=y CONFIG_ROCKCHIP_GPIO=y @@ -101,10 +105,15 @@ CONFIG_DWC_ETH_QOS=y CONFIG_DWC_ETH_QOS_ROCKCHIP=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_SPL_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_SPL_PMIC_RK8XX=y +CONFIG_REGULATOR_RK8XX=y CONFIG_SPL_RAM=y CONFIG_SCSI=y CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550_MEM32=y +CONFIG_ROCKCHIP_SPI=y CONFIG_SYSRESET=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y