- use I/O accessors -> For accessing the FPGA therefore a struct km_bec_fpga is introduced. - no longer externs needed - to defines, that only select functions, don;t assign a numeric value - Codingstyle changes to prevent checkpatch errors/warnings
Signed-off-by: Heiko Schocher hs@denx.de cc: Kim Phillips kim.phillips@freescale.com cc: Holger Brunck holger.brunck@keymile.com cc: Wolfgang Denk wd@denx.de cc: Detlev Zundel dzu@denx.de cc: Valentin Longchamp valentin.longchamp@keymile.com cc: Prafulla Wadaskar prafulla@marvell.com --- Changes for v3: - new in this patchset, to prevent a lot of checkpatch errors/warnings
board/keymile/common/common.c | 347 ++++++++++++++++++-------------------- board/keymile/common/common.h | 39 ++++- board/keymile/km_arm/km_arm.c | 25 ++-- board/keymile/kmeter1/kmeter1.c | 122 +++++++------- board/keymile/mgcoge/mgcoge.c | 82 +++++----- include/configs/keymile-common.h | 62 ++++---- include/configs/km_arm.h | 8 +- include/configs/kmeter1.h | 104 +++++++----- include/configs/mgcoge.h | 107 +++++++----- 9 files changed, 475 insertions(+), 421 deletions(-)
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index 86be9c2..ea32028 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -39,9 +39,7 @@ #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) #include <i2c.h>
-extern int i2c_soft_read_pin (void); - -int ivm_calc_crc (unsigned char *buf, int len) +int ivm_calc_crc(unsigned char *buf, int len) { const unsigned short crc_tab[16] = { 0x0000, 0xCC01, 0xD801, 0x1400, @@ -71,20 +69,20 @@ int ivm_calc_crc (unsigned char *buf, int len) return crc; }
-static int ivm_set_value (char *name, char *value) +static int ivm_set_value(char *name, char *value) { char tempbuf[256];
if (value != NULL) { - sprintf (tempbuf, "%s=%s", name, value); - return set_local_var (tempbuf, 0); + sprintf(tempbuf, "%s=%s", name, value); + return set_local_var(tempbuf, 0); } else { - unset_local_var (name); + unset_local_var(name); } return 0; }
-static int ivm_get_value (unsigned char *buf, int len, char *name, int off, +static int ivm_get_value(unsigned char *buf, int len, char *name, int off, int check) { unsigned short val; @@ -92,21 +90,21 @@ static int ivm_get_value (unsigned char *buf, int len, char *name, int off,
if ((buf[off + 0] != buf[off + 2]) && (buf[off + 2] != buf[off + 4])) { - printf ("%s Error corrupted %s\n", __FUNCTION__, name); + printf("%s Error corrupted %s\n", __func__, name); val = -1; } else { val = buf[off + 0] + (buf[off + 1] << 8); if ((val == 0) && (check == 1)) val = -1; } - sprintf ((char *)valbuf, "%x", val); - ivm_set_value (name, (char *)valbuf); + sprintf((char *)valbuf, "%x", val); + ivm_set_value(name, (char *)valbuf); return val; }
-#define INVENTORYBLOCKSIZE 0x100 -#define INVENTORYDATAADDRESS 0x21 -#define INVENTORYDATASIZE (INVENTORYBLOCKSIZE - INVENTORYDATAADDRESS - 3) +#define INV_BLOCKSIZE 0x100 +#define INV_DATAADDRESS 0x21 +#define INVENTORYDATASIZE (INV_BLOCKSIZE - INV_DATAADDRESS - 3)
#define IVM_POS_SHORT_TEXT 0 #define IVM_POS_MANU_ID 1 @@ -121,19 +119,19 @@ static int ivm_get_value (unsigned char *buf, int len, char *name, int off, #define IVM_POS_HISTORY 10 #define IVM_POS_SYMBOL_ONLY 11
-static char convert_char (char c) +static char convert_char(char c) { return (c < ' ' || c > '~') ? '.' : c; }
-static int ivm_findinventorystring (int type, +static int ivm_findinventorystring(int type, unsigned char* const string, unsigned long maxlen, unsigned char *buf) { int xcode = 0; unsigned long cr = 0; - unsigned long addr = INVENTORYDATAADDRESS; + unsigned long addr = INV_DATAADDRESS; unsigned long size = 0; unsigned long nr = type; int stop = 0; /* stop on semicolon */ @@ -157,8 +155,10 @@ static int ivm_findinventorystring (int type, addr++; }
- /* the expected number of CR was found until the end of the IVM - * content --> fill string */ + /* + * the expected number of CR was found until the end of the IVM + * content --> fill string + */ if (addr < INVENTORYDATASIZE) { /* Copy the IVM string in the corresponding string */ for (; (buf[addr] != '\r') && @@ -170,64 +170,62 @@ static int ivm_findinventorystring (int type, convert_char (buf[addr])); }
- /* copy phase is done: check if everything is ok. If not, + /* + * copy phase is done: check if everything is ok. If not, * the inventory data is most probably corrupted: tell - * the world there is a problem! */ + * the world there is a problem! + */ if (addr == INVENTORYDATASIZE) { xcode = -1; - printf ("Error end of string not found\n"); + printf("Error end of string not found\n"); } else if ((size >= (maxlen - 1)) && (buf[addr] != '\r')) { xcode = -1; - printf ("string too long till next CR\n"); + printf("string too long till next CR\n"); } } else { - /* some CR are missing... - * the inventory data is most probably corrupted */ + /* + * some CR are missing... + * the inventory data is most probably corrupted + */ xcode = -1; - printf ("not enough cr found\n"); + printf("not enough cr found\n"); } return xcode; }
#define GET_STRING(name, which, len) \ - if (ivm_findinventorystring (which, valbuf, len, buf) == 0) { \ - ivm_set_value (name, (char *)valbuf); \ + if (ivm_findinventorystring(which, valbuf, len, buf) == 0) { \ + ivm_set_value(name, (char *)valbuf); \ }
-static int ivm_check_crc (unsigned char *buf, int block) +static int ivm_check_crc(unsigned char *buf, int block) { unsigned long crc; unsigned long crceeprom;
- crc = ivm_calc_crc (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2); + crc = ivm_calc_crc(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2); crceeprom = (buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 1] + \ buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2] * 256); if (crc != crceeprom) { if (block == 0) - printf ("Error CRC Block: %d EEprom: calculated: \ + printf("Error CRC Block: %d EEprom: calculated: \ %lx EEprom: %lx\n", block, crc, crceeprom); return -1; } return 0; }
-static int ivm_analyze_block2 (unsigned char *buf, int len) +static int ivm_analyze_block2(unsigned char *buf, int len) { unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN]; unsigned long count;
/* IVM_MacAddress */ - sprintf ((char *)valbuf, "%02X:%02X:%02X:%02X:%02X:%02X", - buf[1], - buf[2], - buf[3], - buf[4], - buf[5], - buf[6]); - ivm_set_value ("IVM_MacAddress", (char *)valbuf); - if (getenv ("ethaddr") == NULL) - setenv ((char *)"ethaddr", (char *)valbuf); + sprintf((char *)valbuf, "%pM", buf); + ivm_set_value("IVM_MacAddress", (char *)valbuf); + if (getenv("ethaddr") == NULL) + setenv((char *)"ethaddr", (char *)valbuf); /* IVM_MacCount */ count = (buf[10] << 24) + (buf[11] << 16) + @@ -235,48 +233,52 @@ static int ivm_analyze_block2 (unsigned char *buf, int len) buf[13]; if (count == 0xffffffff) count = 1; - sprintf ((char *)valbuf, "%lx", count); - ivm_set_value ("IVM_MacCount", (char *)valbuf); + sprintf((char *)valbuf, "%lx", count); + ivm_set_value("IVM_MacCount", (char *)valbuf); return 0; }
-int ivm_analyze_eeprom (unsigned char *buf, int len) +int ivm_analyze_eeprom(unsigned char *buf, int len) { unsigned short val; unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN]; unsigned char *tmp;
- if (ivm_check_crc (buf, 0) != 0) + if (ivm_check_crc(buf, 0) != 0) return -1;
- ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_BoardId", 0, 1); - val = ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_HWKey", 6, 1); + ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, + "IVM_BoardId", 0, 1); + val = ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, + "IVM_HWKey", 6, 1); if (val != 0xffff) { - sprintf ((char *)valbuf, "%x", ((val /100) % 10)); - ivm_set_value ("IVM_HWVariant", (char *)valbuf); - sprintf ((char *)valbuf, "%x", (val % 100)); - ivm_set_value ("IVM_HWVersion", (char *)valbuf); + sprintf((char *)valbuf, "%x", ((val / 100) % 10)); + ivm_set_value("IVM_HWVariant", (char *)valbuf); + sprintf((char *)valbuf, "%x", (val % 100)); + ivm_set_value("IVM_HWVersion", (char *)valbuf); } - ivm_get_value (buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, "IVM_Functions", 12, 0); + ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN, + "IVM_Functions", 12, 0);
GET_STRING("IVM_Symbol", IVM_POS_SYMBOL_ONLY, 8) GET_STRING("IVM_DeviceName", IVM_POS_SHORT_TEXT, 64) tmp = (unsigned char *) getenv("IVM_DeviceName"); if (tmp) { - int len = strlen ((char *)tmp); + int len = strlen((char *)tmp); int i = 0;
while (i < len) { if (tmp[i] == ';') { - ivm_set_value ("IVM_ShortText", (char *)&tmp[i + 1]); + ivm_set_value("IVM_ShortText", + (char *)&tmp[i + 1]); break; } i++; } if (i >= len) - ivm_set_value ("IVM_ShortText", NULL); + ivm_set_value("IVM_ShortText", NULL); } else { - ivm_set_value ("IVM_ShortText", NULL); + ivm_set_value("IVM_ShortText", NULL); } GET_STRING("IVM_ManufacturerID", IVM_POS_MANU_ID, 32) GET_STRING("IVM_ManufacturerSerialNumber", IVM_POS_MANU_SERIAL, 20) @@ -288,14 +290,15 @@ int ivm_analyze_eeprom (unsigned char *buf, int len) GET_STRING("IVM_CustomerID", IVM_POS_CUSTOMER_ID, 32) GET_STRING("IVM_CustomerProductID", IVM_POS_CUSTOMER_PROD_ID, 32)
- if (ivm_check_crc (&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], 2) != 0) + if (ivm_check_crc(&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], 2) != 0) return 0; - ivm_analyze_block2 (&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], CONFIG_SYS_IVM_EEPROM_PAGE_LEN); + ivm_analyze_block2(&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], + CONFIG_SYS_IVM_EEPROM_PAGE_LEN);
return 0; }
-int ivm_read_eeprom (void) +int ivm_read_eeprom(void) { #if defined(CONFIG_I2C_MUX) I2C_MUX_DEVICE *dev = NULL; @@ -303,33 +306,36 @@ int ivm_read_eeprom (void) uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN]; uchar *buf; unsigned dev_addr = CONFIG_SYS_IVM_EEPROM_ADR; + int ret;
#if defined(CONFIG_I2C_MUX) /* First init the Bus, select the Bus */ #if defined(CONFIG_SYS_I2C_IVM_BUS) - dev = i2c_mux_ident_muxstring ((uchar *)CONFIG_SYS_I2C_IVM_BUS); + dev = i2c_mux_ident_muxstring((uchar *)CONFIG_SYS_I2C_IVM_BUS); #else - buf = (unsigned char *) getenv ("EEprom_ivm"); + buf = (unsigned char *) getenv("EEprom_ivm"); if (buf != NULL) - dev = i2c_mux_ident_muxstring (buf); + dev = i2c_mux_ident_muxstring(buf); #endif if (dev == NULL) { - printf ("Error couldnt add Bus for IVM\n"); + printf("Error couldnt add Bus for IVM\n"); return -1; } - i2c_set_bus_num (dev->busid); + i2c_set_bus_num(dev->busid); #endif
- buf = (unsigned char *) getenv ("EEprom_ivm_addr"); + buf = (unsigned char *) getenv("EEprom_ivm_addr"); if (buf != NULL) - dev_addr = simple_strtoul ((char *)buf, NULL, 16); + dev_addr = simple_strtoul((char *)buf, NULL, 16);
- if (i2c_read(dev_addr, 0, 1, i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN) != 0) { + ret = i2c_read(dev_addr, 0, 1, i2c_buffer, + CONFIG_SYS_IVM_EEPROM_MAX_LEN); + if (ret != 0) { printf ("Error reading EEprom\n"); return -2; }
- return ivm_analyze_eeprom (i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN); + return ivm_analyze_eeprom(i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN); }
#if defined(CONFIG_SYS_I2C_INIT_BOARD) @@ -339,145 +345,117 @@ int ivm_read_eeprom (void) #if defined(CONFIG_MGCOGE) #define SDA_MASK 0x00010000 #define SCL_MASK 0x00020000 -static void set_pin (int state, unsigned long mask) +static void set_pin(int state, unsigned long mask) { - volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3); + ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
if (state) - iop->pdat |= (mask); + setbits_be32(&iop->pdat, mask); else - iop->pdat &= ~(mask); + clrbits_be32(&iop->pdat, mask);
- iop->pdir |= (mask); + setbits_be32(&iop->pdir, mask); }
-static int get_pin (unsigned long mask) +static int get_pin(unsigned long mask) { - volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3); + ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
- iop->pdir &= ~(mask); - return (0 != (iop->pdat & (mask))); + clrbits_be32(&iop->pdir, mask); + return 0 != (in_be32(&iop->pdat) & mask); }
-static void set_sda (int state) +static void set_sda(int state) { - set_pin (state, SDA_MASK); + set_pin(state, SDA_MASK); }
-static void set_scl (int state) +static void set_scl(int state) { - set_pin (state, SCL_MASK); + set_pin(state, SCL_MASK); }
-static int get_sda (void) +static int get_sda(void) { - return get_pin (SDA_MASK); + return get_pin(SDA_MASK); }
-static int get_scl (void) +static int get_scl(void) { - return get_pin (SCL_MASK); + return get_pin(SCL_MASK); }
#if defined(CONFIG_HARD_I2C) -static void setports (int gpio) +static void setports(int gpio) { - volatile ioport_t *iop = ioport_addr ((immap_t *)CONFIG_SYS_IMMR, 3); + ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
if (gpio) { - iop->ppar &= ~(SDA_MASK | SCL_MASK); - iop->podr &= ~(SDA_MASK | SCL_MASK); + clrbits_be32(&iop->ppar, (SDA_MASK | SCL_MASK)); + clrbits_be32(&iop->podr, (SDA_MASK | SCL_MASK)); } else { - iop->ppar |= (SDA_MASK | SCL_MASK); - iop->pdir &= ~(SDA_MASK | SCL_MASK); - iop->podr |= (SDA_MASK | SCL_MASK); + setbits_be32(&iop->ppar, (SDA_MASK | SCL_MASK)); + clrbits_be32(&iop->pdir, (SDA_MASK | SCL_MASK)); + setbits_be32(&iop->podr, (SDA_MASK | SCL_MASK)); } } #endif #endif
-#if defined(CONFIG_KM8XX) -static void set_sda (int state) -{ - I2C_SDA(state); -} - -static void set_scl (int state) -{ - I2C_SCL(state); -} - -static int get_sda (void) -{ - return I2C_READ; -} - -static int get_scl (void) -{ - int val; - - *(unsigned short *)(I2C_BASE_DIR) &= ~SCL_CONF; - udelay (1); - val = *(unsigned char *)(I2C_BASE_PORT); - - return ((val & SCL_BIT) == SCL_BIT); -} -#endif - #if !defined(CONFIG_KMETER1) -static void writeStartSeq (void) +static void writeStartSeq(void) { - set_sda (1); - udelay (DELAY_HALF_PERIOD); - set_scl (1); - udelay (DELAY_HALF_PERIOD); - set_sda (0); - udelay (DELAY_HALF_PERIOD); - set_scl (0); - udelay (DELAY_HALF_PERIOD); + set_sda(1); + udelay(DELAY_HALF_PERIOD); + set_scl(1); + udelay(DELAY_HALF_PERIOD); + set_sda(0); + udelay(DELAY_HALF_PERIOD); + set_scl(0); + udelay(DELAY_HALF_PERIOD); }
-/* I2C is a synchronous protocol and resets of the processor in the middle - of an access can block the I2C Bus until a powerdown of the full unit is - done. This function toggles the SCL until the SCL and SCA line are - released, but max. 16 times, after this a I2C start-sequence is sent. - This I2C Deblocking mechanism was developed by Keymile in association - with Anatech and Atmel in 1998. +/* + * I2C is a synchronous protocol and resets of the processor in the middle + * of an access can block the I2C Bus until a powerdown of the full unit is + * done. This function toggles the SCL until the SCL and SCA line are + * released, but max. 16 times, after this a I2C start-sequence is sent. + * This I2C Deblocking mechanism was developed by Keymile in association + * with Anatech and Atmel in 1998. */ -static int i2c_make_abort (void) +static int i2c_make_abort(void) { int scl_state = 0; int sda_state = 0; int i = 0; int ret = 0;
- if (!get_sda ()) { + if (!get_sda()) { ret = -1; while (i < 16) { i++; - set_scl (0); - udelay (DELAY_ABORT_SEQ); - set_scl (1); - udelay (DELAY_ABORT_SEQ); - scl_state = get_scl (); - sda_state = get_sda (); + set_scl(0); + udelay(DELAY_ABORT_SEQ); + set_scl(1); + udelay(DELAY_ABORT_SEQ); + scl_state = get_scl(); + sda_state = get_sda(); if (scl_state && sda_state) { ret = 0; break; } } } - if (ret == 0) { - for (i =0; i < 5; i++) { - writeStartSeq (); - } - } - get_sda (); + if (ret == 0) + for (i = 0; i < 5; i++) + writeStartSeq(); + + get_sda(); return ret; } #endif
-/** +/* * i2c_init_board - reset i2c bus. When the board is powercycled during a * bus transfer it might hang; for details see doc/I2C_Edge_Conditions. */ @@ -488,36 +466,37 @@ void i2c_init_board(void) dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET); uchar dummy;
- out_8 (&dev->cr, (I2C_CR_MSTA)); - out_8 (&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA)); + out_8(&dev->cr, (I2C_CR_MSTA)); + out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA)); dummy = in_8(&dev->dr); dummy = in_8(&dev->dr); if (dummy != 0xff) { dummy = in_8(&dev->dr); } - out_8 (&dev->cr, (I2C_CR_MEN)); - out_8 (&dev->cr, 0x00); - out_8 (&dev->cr, (I2C_CR_MEN)); - + out_8(&dev->cr, (I2C_CR_MEN)); + out_8(&dev->cr, 0x00); + out_8(&dev->cr, (I2C_CR_MEN)); #else #if defined(CONFIG_HARD_I2C) && !defined(MACH_TYPE_KM_KIRKWOOD) - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; - volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; + immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; + i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
- /* disable I2C controller first, otherwhise it thinks we want to */ - /* talk to the slave port... */ - i2c->i2c_i2mod &= ~0x01; + /* + * disable I2C controller first, otherwhise it thinks we want to + * talk to the slave port... + */ + clrbits_8(&i2c->i2c_i2mod, 0x01);
/* Set the PortPins to GPIO */ - setports (1); + setports(1); #endif
/* Now run the AbortSequence() */ - i2c_make_abort (); + i2c_make_abort();
#if defined(CONFIG_HARD_I2C) /* Set the PortPins back to use for I2C */ - setports (0); + setports(0); #endif #endif } @@ -525,7 +504,7 @@ void i2c_init_board(void) #endif
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) -int fdt_set_node_and_value (void *blob, +int fdt_set_node_and_value(void *blob, char *nodename, char *regname, void *var, @@ -534,21 +513,22 @@ int fdt_set_node_and_value (void *blob, int ret = 0; int nodeoffset = 0;
- nodeoffset = fdt_path_offset (blob, nodename); + nodeoffset = fdt_path_offset(blob, nodename); if (nodeoffset >= 0) { - ret = fdt_setprop (blob, nodeoffset, regname, var, + ret = fdt_setprop(blob, nodeoffset, regname, var, size); if (ret < 0) printf("ft_blob_update(): cannot set %s/%s " "property err:%s\n", nodename, regname, - fdt_strerror (ret)); + fdt_strerror(ret)); } else { printf("ft_blob_update(): cannot find %s node " - "err:%s\n", nodename, fdt_strerror (nodeoffset)); + "err:%s\n", nodename, fdt_strerror(nodeoffset)); } return ret; } -int fdt_get_node_and_value (void *blob, + +int fdt_get_node_and_value(void *blob, char *nodename, char *propname, void **var) @@ -556,42 +536,43 @@ int fdt_get_node_and_value (void *blob, int len; int nodeoffset = 0;
- nodeoffset = fdt_path_offset (blob, nodename); + nodeoffset = fdt_path_offset(blob, nodename); if (nodeoffset >= 0) { - *var = (void *)fdt_getprop (blob, nodeoffset, propname, &len); + *var = (void *)fdt_getprop(blob, nodeoffset, propname, &len); if (len == 0) { /* no value */ - printf ("%s no value\n", __FUNCTION__); + printf("%s no value\n", __func__); return -1; } else if (len > 0) { return len; } else { - printf ("libfdt fdt_getprop(): %s\n", + printf("libfdt fdt_getprop(): %s\n", fdt_strerror(len)); return -2; } } else { - printf("%s: cannot find %s node err:%s\n", __FUNCTION__, - nodename, fdt_strerror (nodeoffset)); + printf("%s: cannot find %s node err:%s\n", __func__, + nodename, fdt_strerror(nodeoffset)); return -3; } } #endif
#if !defined(MACH_TYPE_KM_KIRKWOOD) -int ethernet_present (void) +int ethernet_present(void) { - return (in_8((u8 *)CONFIG_SYS_PIGGY_BASE + CONFIG_SYS_SLOT_ID_OFF) & 0x80); + struct km_bec_fpga *base = (struct km_bec_fpga *)CONFIG_SYS_PIGGY_BASE; + + return in_8(&base->bprth) & PIGGY_PRESENT; } #endif
-int board_eth_init (bd_t *bis) +int board_eth_init(bd_t *bis) { #ifdef CONFIG_KEYMILE_HDLC_ENET - (void)keymile_hdlc_enet_initialize (bis); + (void)keymile_hdlc_enet_initialize(bis); #endif - if (ethernet_present ()) { + if (ethernet_present()) return -1; - } return 0; } diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h index a38c727..e0d2603 100644 --- a/board/keymile/common/common.h +++ b/board/keymile/common/common.h @@ -11,20 +11,49 @@ #ifndef __KEYMILE_COMMON_H #define __KEYMILE_COMMON_H
-int ethernet_present (void); -int ivm_read_eeprom (void); +#define WRG_RESET 0x80 +#define H_OPORTS_14 0x40 +#define WRG_LED 0x02 +#define WRL_BOOT 0x01 + +#define H_OPORTS_SCC4_ENA 0x10 +#define H_OPORTS_SCC4_FD_ENA 0x04 +#define H_OPORTS_FCC1_PW_DWN 0x01 + +#define PIGGY_PRESENT 0x80 + +struct km_bec_fpga { + unsigned char id; + unsigned char rev; + unsigned char oprth; + unsigned char oprtl; + unsigned char res1[3]; + unsigned char bprth; + unsigned char bprtl; + unsigned char res2[6]; + unsigned char prst; + unsigned char res3[0xfff0]; + unsigned char pgy_id; + unsigned char pgy_rev; + unsigned char pgy_out; +}; + +int ethernet_present(void); +int ivm_read_eeprom(void);
#ifdef CONFIG_KEYMILE_HDLC_ENET -int keymile_hdlc_enet_initialize (bd_t *bis); +int keymile_hdlc_enet_initialize(bd_t *bis); #endif
-int fdt_set_node_and_value (void *blob, +int fdt_set_node_and_value(void *blob, char *nodename, char *regname, void *var, int size); -int fdt_get_node_and_value (void *blob, +int fdt_get_node_and_value(void *blob, char *nodename, char *propname, void **var); + +int i2c_soft_read_pin(void); #endif /* __KEYMILE_COMMON_H */ diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 5c1e822..9d0892d 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -42,7 +42,6 @@ DECLARE_GLOBAL_DATA_PTR;
static int io_dev; -extern I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf);
/* Multi-Purpose Pins Functionality configuration */ u32 kwmpp_config[] = { @@ -111,12 +110,12 @@ int ethernet_present(void) int ret = 0;
if (i2c_read(0x10, 2, 1, &buf, 1) != 0) { - printf ("%s: Error reading Boco\n", __FUNCTION__); + printf("%s: Error reading Boco\n", __func__); return -1; } - if ((buf & 0x40) == 0x40) { + if ((buf & 0x40) == 0x40) ret = 1; - } + return ret; }
@@ -265,15 +264,15 @@ void reset_phy(void) }
#if defined(CONFIG_HUSH_INIT_VAR) -int hush_init_var (void) +int hush_init_var(void) { - ivm_read_eeprom (); + ivm_read_eeprom(); return 0; } #endif
#if defined(CONFIG_BOOTCOUNT_LIMIT) -void bootcount_store (ulong a) +void bootcount_store(ulong a) { volatile ulong *save_addr; volatile ulong size = 0; @@ -286,7 +285,7 @@ void bootcount_store (ulong a) writel(BOOTCOUNT_MAGIC, &save_addr[1]); }
-ulong bootcount_load (void) +ulong bootcount_load(void) { volatile ulong *save_addr; volatile ulong size = 0; @@ -303,31 +302,31 @@ ulong bootcount_load (void) #endif
#if defined(CONFIG_SOFT_I2C) -void set_sda (int state) +void set_sda(int state) { I2C_ACTIVE; I2C_SDA(state); }
-void set_scl (int state) +void set_scl(int state) { I2C_SCL(state); }
-int get_sda (void) +int get_sda(void) { I2C_TRISTATE; return I2C_READ; }
-int get_scl (void) +int get_scl(void) { return (kw_gpio_get_value(SUEN3_SCL_PIN) ? 1 : 0); } #endif
#if defined(CONFIG_SYS_EEPROM_WREN) -int eeprom_write_enable (unsigned dev_addr, int state) +int eeprom_write_enable(unsigned dev_addr, int state) { kw_gpio_set_value(SUEN3_ENV_WP, !state);
diff --git a/board/keymile/kmeter1/kmeter1.c b/board/keymile/kmeter1/kmeter1.c index bbcaf5d..bfc9174 100644 --- a/board/keymile/kmeter1/kmeter1.c +++ b/board/keymile/kmeter1/kmeter1.c @@ -30,8 +30,6 @@
#include "../common/common.h"
-extern void disable_addr_trans (void); -extern void enable_addr_trans (void); const qe_iop_conf_t qe_iop_conf_tab[] = { /* port pin dir open_drain assign */
@@ -62,131 +60,140 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { {0, 0, 0, 0, QE_IOP_TAB_END}, };
-static int board_init_i2c_busses (void) +static int board_init_i2c_busses(void) { I2C_MUX_DEVICE *dev = NULL; uchar *buf;
/* Set up the Bus for the DTTs */ - buf = (unsigned char *) getenv ("dtt_bus"); + buf = (unsigned char *) getenv("dtt_bus"); if (buf != NULL) - dev = i2c_mux_ident_muxstring (buf); + dev = i2c_mux_ident_muxstring(buf); if (dev == NULL) { - printf ("Error couldn't add Bus for DTT\n"); - printf ("please setup dtt_bus to where your\n"); - printf ("DTT is found.\n"); + printf("Error couldn't add Bus for DTT\n"); + printf("please setup dtt_bus to where your\n"); + printf("DTT is found.\n"); } return 0; }
-int board_early_init_r (void) +int board_early_init_r(void) { + struct km_bec_fpga *base = (struct km_bec_fpga *)CONFIG_SYS_PIGGY_BASE; unsigned short svid;
/* * Because of errata in the UCCs, we have to write to the reserved * registers to slow the clocks down. */ - svid = SVR_REV(mfspr (SVR)); + svid = SVR_REV(mfspr(SVR)); switch (svid) { case 0x0020: + /* + * MPC8360ECE.pdf QE_ENET10 table 4: + * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2) + * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1) + */ setbits_be32((void *)(CONFIG_SYS_IMMR + 0x14a8), 0x0c003000); break; case 0x0021: + /* + * MPC8360ECE.pdf QE_ENET10 table 4: + * IMMR + 0x14AC[24:27] = 1010 + */ clrsetbits_be32((void *)(CONFIG_SYS_IMMR + 0x14ac), 0x00000050, 0x000000a0); break; } /* enable the PHY on the PIGGY */ - setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x10003), 0x01); + setbits_8(&base->pgy_out, 0x01); /* enable the Unit LED (green) */ - setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x00002), 0x01); + setbits_8(&base->oprth, WRL_BOOT); /* take FE/GbE PHYs out of reset */ - setbits (8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x0000f), 0x1c); + setbits_8(&base->prst, 0x1c);
return 0; }
-int misc_init_r (void) +int misc_init_r(void) { /* add board specific i2c busses */ - board_init_i2c_busses (); + board_init_i2c_busses(); return 0; }
int fixed_sdram(void) { - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + immap_t *im = (immap_t *)CONFIG_SYS_IMMR; u32 msize = 0; u32 ddr_size; u32 ddr_size_log2;
- im->sysconf.ddrlaw[0].ar = LAWAR_EN | 0x1e; - im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; - im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; - im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; - im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; - im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; - im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; - udelay (200); - im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; + out_be32(&im->sysconf.ddrlaw[0].ar, (LAWAR_EN | 0x1e)); + out_be32(&im->ddr.csbnds[0].csbnds, CONFIG_SYS_DDR_CS0_BNDS); + out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG); + out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); + out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); + out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); + out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); + out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG); + out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2); + out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE); + out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2); + out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL); + out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL); + udelay(200); + out_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
msize = CONFIG_SYS_DDR_SIZE << 20; - disable_addr_trans (); - msize = get_ram_size (CONFIG_SYS_DDR_BASE, msize); - enable_addr_trans (); + disable_addr_trans(); + msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize); + enable_addr_trans(); msize /= (1024 * 1024); if (CONFIG_SYS_DDR_SIZE != msize) { for (ddr_size = msize << 20, ddr_size_log2 = 0; - (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) + (ddr_size > 1); + ddr_size = ddr_size >> 1, ddr_size_log2++) if (ddr_size & 1) return -1; - im->sysconf.ddrlaw[0].ar = - LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); - im->ddr.csbnds[0].csbnds = (((msize / 16) - 1) & 0xff); + out_be32(&im->sysconf.ddrlaw[0].ar, + (LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE))); + out_be32(&im->ddr.csbnds[0].csbnds, + (((msize / 16) - 1) & 0xff)); }
return msize; }
-phys_size_t initdram (int board_type) +phys_size_t initdram(int board_type) { -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - extern void ddr_enable_ecc (unsigned int dram_size); -#endif - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + immap_t *im = (immap_t *)CONFIG_SYS_IMMR; u32 msize = 0;
- if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im) return -1;
- /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; - msize = fixed_sdram (); + out_be32(&im->sysconf.ddrlaw[0].bar, + CONFIG_SYS_DDR_BASE & LAWBAR_BAR); + msize = fixed_sdram();
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* * Initialize DDR ECC byte */ - ddr_enable_ecc (msize * 1024 * 1024); + ddr_enable_ecc(msize * 1024 * 1024); #endif
/* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); }
-int checkboard (void) +int checkboard(void) { - puts ("Board: Keymile kmeter1"); - if (ethernet_present ()) - puts (" with PIGGY."); - puts ("\n"); + puts("Board: Keymile kmeter1"); + if (ethernet_present()) + puts(" with PIGGY."); + puts("\n"); return 0; }
@@ -194,13 +201,13 @@ int checkboard (void) /* * update property in the blob */ -void ft_blob_update (void *blob, bd_t *bd) +void ft_blob_update(void *blob, bd_t *bd) { /* no board specific update */ }
-void ft_board_setup (void *blob, bd_t *bd) +void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup (blob, bd); ft_blob_update (blob, bd); @@ -208,10 +215,9 @@ void ft_board_setup (void *blob, bd_t *bd) #endif
#if defined(CONFIG_HUSH_INIT_VAR) -extern int ivm_read_eeprom (void); -int hush_init_var (void) +int hush_init_var(void) { - ivm_read_eeprom (); + ivm_read_eeprom(); return 0; } #endif diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c index 5c9496c..de80aa5 100644 --- a/board/keymile/mgcoge/mgcoge.c +++ b/board/keymile/mgcoge/mgcoge.c @@ -195,33 +195,30 @@ const iop_conf_t iop_conf_tab[4][32] = { } };
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx +/* + * Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx * * This routine performs standard 8260 initialization sequence * and calculates the available memory size. It may be called * several times to try different SDRAM configurations on both * 60x and local buses. */ -static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, - ulong orx, volatile uchar * base) +static long int try_init(memctl8260_t *memctl, ulong sdmr, + ulong orx, uchar *base) { - volatile uchar c = 0xff; - volatile uint *sdmr_ptr; - volatile uint *orx_ptr; + uchar c = 0xff; ulong maxsize, size; int i;
- /* We must be able to test a location outsize the maximum legal size + /* + * We must be able to test a location outsize the maximum legal size * to find out THAT we are outside; but this address still has to be * mapped by the controller. That means, that the initial mapping has * to be (at least) twice as large as the maximum expected size. */ maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
- sdmr_ptr = &memctl->memc_psdmr; - orx_ptr = &memctl->memc_or1; - - *orx_ptr = orx; + out_be32(&memctl->memc_or1, orx);
/* * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): @@ -243,78 +240,83 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. */
- *sdmr_ptr = sdmr | PSDMR_OP_PREA; - *base = c; + out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_PREA); + out_8(base, c);
- *sdmr_ptr = sdmr | PSDMR_OP_CBRR; + out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_CBRR); for (i = 0; i < 8; i++) - *base = c; + out_8(base, c);
- *sdmr_ptr = sdmr | PSDMR_OP_MRW; - *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */ + out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_MRW); + /* setting MR on address lines */ + out_8((uchar *)(base + CONFIG_SYS_MRS_OFFS), c);
- *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; - *base = c; + out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_NORM | PSDMR_RFEN); + out_8(base, c);
- size = get_ram_size ((long *)base, maxsize); - *orx_ptr = orx | ~(size - 1); + size = get_ram_size((long *)base, maxsize); + out_be32(&memctl->memc_or1, orx | ~(size - 1));
return (size); }
-phys_size_t initdram (int board_type) +phys_size_t initdram(int board_type) { - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; + immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + memctl8260_t *memctl = &immap->im_memctl;
long psize;
- memctl->memc_psrt = CONFIG_SYS_PSRT; - memctl->memc_mptpr = CONFIG_SYS_MPTPR; + out_8(&memctl->memc_psrt, CONFIG_SYS_PSRT); + out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR);
#ifndef CONFIG_SYS_RAMBOOT /* 60x SDRAM setup: */ - psize = try_init (memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1, - (uchar *) CONFIG_SYS_SDRAM_BASE); + psize = try_init(memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1, + (uchar *) CONFIG_SYS_SDRAM_BASE); #endif /* CONFIG_SYS_RAMBOOT */
- icache_enable (); + icache_enable();
return (psize); }
int checkboard(void) { - puts ("Board: Keymile mgcoge"); - if (ethernet_present ()) - puts (" with PIGGY."); - puts ("\n"); + puts("Board: Keymile mgcoge"); + if (ethernet_present()) + puts(" with PIGGY."); + puts("\n"); return 0; }
/* * Early board initalization. */ -int board_early_init_r (void) +int board_early_init_r(void) { + struct km_bec_fpga *base = (struct km_bec_fpga *)CONFIG_SYS_PIGGY_BASE; + /* setup the UPIOx */ /* General Unit Reset disabled, Flash Bank enabled, UnitLed on */ - out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x02), 0xc2); + out_8(&base->oprth, (WRG_RESET | H_OPORTS_14 | WRG_LED)); /* SCC4 enable, halfduplex, FCC1 powerdown */ - out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x03), 0x15); + out_8(&base->oprtl, (H_OPORTS_SCC4_ENA | H_OPORTS_SCC4_FD_ENA | + H_OPORTS_FCC1_PW_DWN)); + return 0; }
-int hush_init_var (void) +int hush_init_var(void) { - ivm_read_eeprom (); + ivm_read_eeprom(); return 0; }
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) -void ft_board_setup (void *blob, bd_t *bd) +void ft_board_setup(void *blob, bd_t *bd) { - ft_cpu_setup (blob, bd); + ft_cpu_setup(blob, bd); } #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index e3bd264..b934620 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2008 + * (C) Copyright 2008-2011 * Heiko Schocher, DENX Software Engineering, hs@denx.de. * * See file CREDITS for list of people who contributed to this @@ -25,7 +25,7 @@ #define __CONFIG_KEYMILE_H
/* Do boardspecific init for all boards */ -#define CONFIG_BOARD_EARLY_INIT_R 1 +#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_BOOTCOUNT_LIMIT
@@ -63,44 +63,44 @@ #define CONFIG_JFFS2_CMDLINE #define CONFIG_CMD_MTDPARTS
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ +#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
/* * Miscellaneous configurable options */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE
-#define CONFIG_HUSH_INIT_VAR 1 +#define CONFIG_HUSH_INIT_VAR
#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00100000 +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x100000
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decr. freq: 1 ms ticks */
-#define CONFIG_BAUDRATE 115200 +#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_LOADS_ECHO +#define CONFIG_SYS_LOADS_BAUD_CHANGE #define CONFIG_SYS_BOARD_DRAM_INIT /* Used board specific dram_init */
/* @@ -108,28 +108,28 @@ * to modify in a centralized location. This is used in the HDLC * driver to set the MAC. */ -#define CONFIG_CHECK_ETHERNET_PRESENT 1 +#define CONFIG_CHECK_ETHERNET_PRESENT #define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE #define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ #define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */
-#define CONFIG_I2C_MULTI_BUS 1 +#define CONFIG_I2C_MULTI_BUS #define CONFIG_SYS_MAX_I2C_BUS 1 -#define CONFIG_SYS_I2C_INIT_BOARD 1 -#define CONFIG_I2C_MUX 1 +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_I2C_MUX
/* EEprom support */ -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 +#define CONFIG_SYS_I2C_MULTI_EEPROMS #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
/* Support the IVM EEprom */ #define CONFIG_SYS_IVM_EEPROM_ADR 0x50 #define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400 #define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
-#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_FLASH_PROTECTION
/* * BOOTP options @@ -141,7 +141,7 @@
#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
/* UBI Support for all Keymile boards */ #define CONFIG_CMD_UBI diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h index 533da73..b3cd5a3 100644 --- a/include/configs/km_arm.h +++ b/include/configs/km_arm.h @@ -6,6 +6,9 @@ * (C) Copyright 2009 * Stefan Roese, DENX Software Engineering, sr@denx.de. * + * (C) Copyright 2010-2011 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * * See file CREDITS for list of people who contributed to this * project. * @@ -25,7 +28,10 @@ * MA 02110-1301 USA */
-/* for linking errors see http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */ +/* + * for linking errors see + * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html + */
#ifndef _CONFIG_KM_ARM_H #define _CONFIG_KM_ARM_H diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 8fcadfe..f288cb0 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -23,11 +23,9 @@ /* * High Level Configuration Options */ -#define CONFIG_E300 1 /* E300 family */ -#define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ -#define CONFIG_MPC8360 1 /* MPC8360 CPU specific */ -#define CONFIG_KMETER1 1 /* KMETER1 board specific */ +#define CONFIG_QE /* Has QE */ +#define CONFIG_MPC8360 /* MPC8360 CPU specific */ +#define CONFIG_KMETER1 /* KMETER1 board specific */ #define CONFIG_HOSTNAME kmeter1
#define CONFIG_SYS_TEXT_BASE 0xF0000000 @@ -42,7 +40,7 @@ "mtdparts=boot:768k(u-boot),128k(env),128k(envred)," \ "-(" CONFIG_KM_UBI_PARTITION_NAME ")"
-#define CONFIG_MISC_INIT_R 1 +#define CONFIG_MISC_INIT_R /* * System Clock Setup */ @@ -114,8 +112,9 @@ #define CONFIG_SYS_DDR_SIZE 2048 /* MB */ #define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ - CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10 | CSCONFIG_ODT_WR_ACS) + CSCONFIG_ROW_BIT_13 | \ + CSCONFIG_COL_BIT_10 | \ + CSCONFIG_ODT_WR_ACS)
#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ SDRAM_CFG_SREN) @@ -137,14 +136,14 @@ (0 << TIMING_CFG0_WRT_SHIFT) | \ (0 << TIMING_CFG0_RWT_SHIFT))
-#define CONFIG_SYS_DDR_TIMING_1 (( TIMING_CFG1_CASLAT_50) | \ - ( 2 << TIMING_CFG1_WRTORD_SHIFT) | \ - ( 2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ - ( 3 << TIMING_CFG1_WRREC_SHIFT) | \ - ( 7 << TIMING_CFG1_REFREC_SHIFT) | \ - ( 3 << TIMING_CFG1_ACTTORW_SHIFT) | \ - ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ - ( 3 << TIMING_CFG1_PRETOACT_SHIFT)) +#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ + (2 << TIMING_CFG1_WRTORD_SHIFT) | \ + (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ + (3 << TIMING_CFG1_WRREC_SHIFT) | \ + (7 << TIMING_CFG1_REFREC_SHIFT) | \ + (3 << TIMING_CFG1_ACTTORW_SHIFT) | \ + (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ + (3 << TIMING_CFG1_PRETOACT_SHIFT))
#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ @@ -172,7 +171,7 @@ #undef CONFIG_SYS_RAMBOOT #endif
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve for Mon */
/* * Initial RAM Base Address Setup @@ -180,7 +179,8 @@ #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE)
/* * Local Bus Configuration & Clock Setup @@ -208,7 +208,7 @@ #define CONFIG_SYS_FLASH_PROTECTION 1 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
-#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* Window base at flash base */ +#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001b /* 256MB window size */
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ @@ -220,8 +220,9 @@ OR_GPCM_SCY_5 | \ OR_GPCM_TRLX | OR_GPCM_EAD)
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ +/* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
#undef CONFIG_SYS_FLASH_CHECKSUM @@ -229,13 +230,13 @@ /* * PRIO1/PIGGY on the local bus CS1 */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_PIGGY_BASE /* Window base at flash base */ +#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_PIGGY_BASE #define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001A /* 128MB window size */
#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_PIGGY_BASE | \ (1 << BR_PS_SHIFT) | /* 8 bit port size */ \ BR_V) -#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) | /* 128MB */ \ +#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) | \ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ OR_GPCM_SCY_2 | \ OR_GPCM_TRLX | OR_GPCM_EAD) @@ -243,7 +244,7 @@ /* * PAXE on the local bus CS3 */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE /* Window base at flash base */ +#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE #define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001C /* 512MB window size */
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_PAXE_BASE | \ @@ -267,8 +268,8 @@ #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
/* Pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP #define CONFIG_OF_STDOUT_VIA_ALIAS
/* @@ -278,7 +279,7 @@ #undef CONFIG_PCI /* No PCI */
#ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_MULTI #endif /* * QE UEC ethernet configuration @@ -291,7 +292,7 @@
#ifdef CONFIG_UEC_ETH1 #define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII */ #define CONFIG_SYS_UEC1_TX_CLK QE_CLK17 #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 0 @@ -305,17 +306,19 @@
#ifndef CONFIG_SYS_RAMBOOT #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ #define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_LEN)
/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
#else /* CFG_RAMBOOT */ -#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ -#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ +#define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ +#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) #define CONFIG_ENV_SIZE 0x2000 #endif /* CFG_RAMBOOT */ @@ -333,9 +336,9 @@ /* EEprom support */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */ +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 /* ON Semi's LM75 */ +#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */ #define CONFIG_SYS_DTT_MAX_TEMP 70 #define CONFIG_SYS_DTT_LOW_TEMP -30 #define CONFIG_SYS_DTT_HYSTERESIS 3 @@ -361,7 +364,7 @@ * have to be in the first 256 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
/* * Core HID Setup @@ -375,45 +378,54 @@ * MMU Setup */
-#define CONFIG_HIGH_BATS 1 /* High BATs supported */ +#define CONFIG_HIGH_BATS /* High BATs supported */
/* DDR: cache cacheable */ #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
/* IMMRBAR & PCI IO: cache-inhibit and guarded */ #define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | \ + BATU_VP) #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
/* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PIGGY_BASE | BATU_BL_128M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PIGGY_BASE | BATU_BL_128M | \ + BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
/* Stack in dcache: cacheable, no memory coherence */ #define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ + BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
/* PAXE: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | \ + BATU_VS | BATU_VP) #define CONFIG_SYS_DBAT5L (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index 6dec0ee..3a987ad 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -29,15 +29,12 @@ * (easy to change) */
-#define CONFIG_MPC8247 1 -#define CONFIG_MPC8272_FAMILY 1 -#define CONFIG_MGCOGE 1 +#define CONFIG_MPC8247 +#define CONFIG_MGCOGE #define CONFIG_HOSTNAME mgcoge
#define CONFIG_SYS_TEXT_BASE 0xFE000000
-#define CONFIG_CPM2 1 /* Has a CPM2 */ - /* include common defines/options for all Keymile boards */ #include "keymile-common.h"
@@ -69,13 +66,13 @@ #define CONFIG_ETHER_ON_SCC /* Ethernet is on SCC */ #undef CONFIG_ETHER_ON_FCC /* Ethernet is not on FCC */ #undef CONFIG_ETHER_NONE /* No external Ethernet */ -#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_MULTI
#define CONFIG_ETHER_INDEX 4 #define CONFIG_HAS_ETH0 #define CONFIG_SYS_SCC_TOUT_LOOP 10000000
-# define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8) +# define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8)
#ifndef CONFIG_8260_CLKIN #define CONFIG_8260_CLKIN 66000000 /* in Hz */ @@ -113,8 +110,9 @@ #define CONFIG_SYS_FLASH_SIZE 32 #define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 3 +/* max num of sects on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 512
#define CONFIG_SYS_FLASH_BASE_1 0x50000000 #define CONFIG_SYS_FLASH_SIZE_1 32 @@ -130,24 +128,26 @@ #define CONFIG_SYS_RAMBOOT #endif
-#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384KB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (384 << 10)
#define CONFIG_ENV_IS_IN_FLASH
#ifdef CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) #define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN
/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) #endif /* CONFIG_ENV_IS_IN_FLASH */ -#define CONFIG_ENV_BUFFER_PRINT 1 +#define CONFIG_ENV_BUFFER_PRINT
/* enable I2C and select the hardware/software driver */ #undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +#define CONFIG_SOFT_I2C /* I2C bit-banged */ #define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F
@@ -159,15 +159,23 @@ #define I2C_ACTIVE (iop->pdir |= 0x00010000) #define I2C_TRISTATE (iop->pdir &= ~0x00010000) #define I2C_READ ((iop->pdat & 0x00010000) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \ - else iop->pdat &= ~0x00010000 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ - else iop->pdat &= ~0x00020000 +#define I2C_SDA(bit) do { \ + if (bit) \ + iop->pdat |= 0x00010000; \ + else \ + iop->pdat &= ~0x00010000; \ + } while (0) +#define I2C_SCL(bit) do { \ + if (bit) \ + iop->pdat |= 0x00020000; \ + else \ + iop->pdat &= ~0x00020000; \ + } while (0) #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-/* I2C SYSMON (LM75, AD7414 is almost compatible) */ -#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ -#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 /* ON Semi's LM75 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ #define CONFIG_SYS_DTT_MAX_TEMP 70 #define CONFIG_SYS_DTT_LOW_TEMP -30 #define CONFIG_SYS_DTT_HYSTERESIS 3 @@ -178,8 +186,9 @@ #define CONFIG_SYS_IMMR 0xF0000000
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/* Hard reset configuration word */ @@ -194,11 +203,11 @@ #define CONFIG_SYS_HRCW_SLAVE6 0 #define CONFIG_SYS_HRCW_SLAVE7 0
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */ #if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif
#define CONFIG_SYS_HID0_INIT 0 @@ -211,14 +220,16 @@ #define CONFIG_SYS_BCR 0x10000000 #define CONFIG_SYS_SCCR (SCCR_PCI_MODE | SCCR_PCI_MODCK)
-/*----------------------------------------------------------------------- +/* + *----------------------------------------------------------------------- * RMR - Reset Mode Register 5-5 *----------------------------------------------------------------------- * turn on Checkstop Reset Enable */ #define CONFIG_SYS_RMR 0
-/*----------------------------------------------------------------------- +/* + *----------------------------------------------------------------------- * TMCNTSC - Time Counter Status and Control 4-40 *----------------------------------------------------------------------- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, @@ -226,7 +237,8 @@ */ #define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-/*----------------------------------------------------------------------- +/* + *----------------------------------------------------------------------- * PISCR - Periodic Interrupt Status and Control 4-42 *----------------------------------------------------------------------- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable @@ -234,7 +246,8 @@ */ #define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-/*----------------------------------------------------------------------- +/* + *----------------------------------------------------------------------- * RCCR - RISC Controller Configuration 13-7 *----------------------------------------------------------------------- */ @@ -265,14 +278,16 @@ ORxG_TRLX )
-/* Bank 1 - 60x bus SDRAM +/* + * Bank 1 - 60x bus SDRAM */ #define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */ -#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */ +#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (256 << 20)
#define CONFIG_SYS_MPTPR 0x1800
-/*----------------------------------------------------------------------------- +/* + *----------------------------------------------------------------------------- * Address for Mode Register Set (MRS) command *----------------------------------------------------------------------------- */ @@ -286,8 +301,9 @@
#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1
-/* SDRAM initialization values -*/ +/* + * SDRAM initialization values + */
#define CONFIG_SYS_OR1 ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ ORxS_BPD_8 |\ @@ -304,8 +320,9 @@ PSDMR_WRC_1C |\ PSDMR_CL_2)
-/* GPIO/PIGGY on CS3 initialization values -*/ +/* + * GPIO/PIGGY on CS3 initialization values + */ #define CONFIG_SYS_PIGGY_BASE 0x30000000 #define CONFIG_SYS_PIGGY_SIZE 128
@@ -316,8 +333,9 @@ ORxG_CSNT | ORxG_ACS_DIV2 |\ ORxG_SCY_3_CLK | ORxG_TRLX )
-/* Board FPGA on CS4 initialization values -*/ +/* + * Board FPGA on CS4 initialization values + */ #define CONFIG_SYS_FPGA_BASE 0x40000000 #define CONFIG_SYS_FPGA_SIZE 1 /*1KB*/
@@ -328,8 +346,9 @@ ORxG_CSNT | ORxG_ACS_DIV2 |\ ORxG_SCY_3_CLK | ORxG_TRLX )
-/* CFG-Flash on CS5 initialization values -*/ +/* + * CFG-Flash on CS5 initialization values + */ #define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_FLASH_BASE_1 & BRx_BA_MSK) |\ BRx_PS_16 | BRx_MS_GPCM_P | BRx_V)
@@ -338,12 +357,12 @@ ORxG_CSNT | ORxG_ACS_DIV2 |\ ORxG_SCY_5_CLK | ORxG_TRLX )
-#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ +#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
/* pass open firmware flat tree */ -#define CONFIG_FIT 1 -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_FIT +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP
#define OF_TBCLK (bd->bi_busfreq / 4) #define OF_STDOUT_PATH "/soc/cpm/serial@11a90"