Hi Benoît,
On Tue, Apr 9, 2013 at 11:38 AM, Benoît Thébaudeau benoit.thebaudeau@advansee.com wrote:
Can you try different values for the following configs in mx31pdk.h?
- CONFIG_SYS_NAND_U_BOOT_SIZE
- CONFIG_SPL_TEXT_BASE
- CONFIG_SYS_TEXT_BASE
- (CONFIG_ENV_OFFSET)
- (CONFIG_ENV_OFFSET_REDUND)
I would try:
- 0x40000 for CONFIG_SYS_NAND_U_BOOT_SIZE
- 0x86000000 for CONFIG_SPL_TEXT_BASE
- 0x87000000 for CONFIG_SYS_TEXT_BASE
Thanks, that did the trick!
With the changes below I am able to get into the U-boot prompt:
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 8f12825..d82bf65 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -51,8 +51,8 @@ #define CONFIG_SPL_MAX_SIZE 2048 #define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_TEXT_BASE 0x87ec0000 -#define CONFIG_SYS_TEXT_BASE 0x87f00000 +#define CONFIG_SPL_TEXT_BASE 0x86000000 +#define CONFIG_SYS_TEXT_BASE 0x87000000
#ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT @@ -69,8 +69,6 @@
#define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE -#define CONFIG_HW_WATCHDOG -#define CONFIG_IMX_WATCHDOG #define CONFIG_MXC_GPIO
#define CONFIG_HARD_SPI @@ -199,7 +197,7 @@
/* Start copying real U-boot from the second page */ #define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x32000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000 /* Load U-Boot to this address */ #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST