This relies on the old LCD implementation which is to be removed. Drop it.
Signed-off-by: Simon Glass sjg@chromium.org ---
board/samsung/common/board.c | 4 - board/samsung/common/misc.c | 339 ---------------------------- include/configs/s5pc210_universal.h | 3 - include/configs/trats.h | 3 - include/configs/trats2.h | 3 - include/samsung/misc.h | 15 -- scripts/config_whitelist.txt | 1 - 7 files changed, 368 deletions(-)
diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c index ff178b7fe67..04cfc5d6358 100644 --- a/board/samsung/common/board.c +++ b/board/samsung/common/board.c @@ -262,10 +262,6 @@ int misc_init_r(void) #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG set_board_info(); #endif -#ifdef CONFIG_LCD_MENU - keys_init(); - check_boot_mode(); -#endif #ifdef CONFIG_CMD_BMP if (panel_info.logo_on) draw_logo(); diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c index b3b1bbcc820..ee6d2d2a0d7 100644 --- a/board/samsung/common/misc.c +++ b/board/samsung/common/misc.c @@ -114,345 +114,6 @@ void set_board_info(void) } #endif /* CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG */
-#ifdef CONFIG_LCD_MENU -static int power_key_pressed(u32 reg) -{ - struct udevice *dev; - int ret; - u32 status; - u32 mask; - - if (IS_ENABLED(CONFIG_TARGET_TRATS)) - ret = pmic_get("max8997-pmic", &dev); - else if (IS_ENABLED(CONFIG_TARGET_TRATS2)) - ret = pmic_get("max77686-pmic", &dev); - else if (IS_ENABLED(CONFIG_TARGET_S5PC210_UNIVERSAL)) - ret = pmic_get("max8998-pmic", &dev); - else - return 0; - - if (ret) - return ret; - - if (reg == KEY_PWR_STATUS_REG) - mask = KEY_PWR_STATUS_MASK; - else - mask = KEY_PWR_INTERRUPT_MASK; - - status = pmic_reg_read(dev, reg); - if (status < 0) - return status; - - return !!(status & mask); -} - -static int key_pressed(int key) -{ - int value; - - switch (key) { - case KEY_POWER: - value = power_key_pressed(KEY_PWR_INTERRUPT_REG); - break; - case KEY_VOLUMEUP: - value = !gpio_get_value(KEY_VOL_UP_GPIO); - break; - case KEY_VOLUMEDOWN: - value = !gpio_get_value(KEY_VOL_DOWN_GPIO); - break; - default: - value = 0; - break; - } - - return value; -} - -#ifdef CONFIG_LCD -static int check_keys(void) -{ - int keys = 0; - - if (key_pressed(KEY_POWER)) - keys += KEY_POWER; - if (key_pressed(KEY_VOLUMEUP)) - keys += KEY_VOLUMEUP; - if (key_pressed(KEY_VOLUMEDOWN)) - keys += KEY_VOLUMEDOWN; - - return keys; -} - -/* - * 0 BOOT_MODE_INFO - * 1 BOOT_MODE_THOR - * 2 BOOT_MODE_UMS - * 3 BOOT_MODE_DFU - * 4 BOOT_MODE_EXIT - */ -static char * -mode_name[BOOT_MODE_EXIT + 1][2] = { - {"DEVICE", ""}, - {"THOR", "thor"}, - {"UMS", "ums"}, - {"DFU", "dfu"}, - {"GPT", "gpt"}, - {"ENV", "env"}, - {"EXIT", ""}, -}; - -static char * -mode_info[BOOT_MODE_EXIT + 1] = { - "info", - "downloader", - "mass storage", - "firmware update", - "restore", - "default", - "and run normal boot" -}; - -static char * -mode_cmd[BOOT_MODE_EXIT + 1] = { - "", - "thor 0 mmc 0", - "ums 0 mmc 0", - "dfu 0 mmc 0", - "gpt write mmc 0 $partitions", - "env default -a; saveenv", - "", -}; - -static void display_board_info(void) -{ -#ifdef CONFIG_MMC - struct mmc *mmc = find_mmc_device(0); -#endif - vidinfo_t *vid = &panel_info; - - lcd_position_cursor(4, 4); - - lcd_printf("%s\n\t", U_BOOT_VERSION); - lcd_puts("\n\t\tBoard Info:\n"); -#ifdef CONFIG_SYS_BOARD - lcd_printf("\tBoard name: %s\n", CONFIG_SYS_BOARD); -#endif -#ifdef CONFIG_REVISION_TAG - lcd_printf("\tBoard rev: %u\n", get_board_rev()); -#endif - lcd_printf("\tDRAM banks: %u\n", CONFIG_NR_DRAM_BANKS); - lcd_printf("\tDRAM size: %u MB\n", gd->ram_size / SZ_1M); - -#ifdef CONFIG_MMC - if (mmc) { - if (!mmc->capacity) - mmc_init(mmc); - - lcd_printf("\teMMC size: %llu MB\n", mmc->capacity / SZ_1M); - } -#endif - if (vid) - lcd_printf("\tDisplay resolution: %u x % u\n", - vid->vl_col, vid->vl_row); - - lcd_printf("\tDisplay BPP: %u\n", 1 << vid->vl_bpix); -} -#endif - -static int mode_leave_menu(int mode) -{ -#ifdef CONFIG_LCD - char *exit_option; - char *exit_reset = "reset"; - char *exit_back = "back"; - struct cmd_tbl *cmd; - int cmd_result; - int leave; - - lcd_clear(); - - switch (mode) { - case BOOT_MODE_EXIT: - return 1; - case BOOT_MODE_INFO: - display_board_info(); - exit_option = exit_back; - leave = 0; - break; - default: - cmd = find_cmd(mode_name[mode][1]); - if (cmd) { - printf("Enter: %s %s\n", mode_name[mode][0], - mode_info[mode]); - lcd_printf("\n\n\t%s %s\n", mode_name[mode][0], - mode_info[mode]); - lcd_puts("\n\tDo not turn off device before finish!\n"); - - cmd_result = run_command(mode_cmd[mode], 0); - - if (cmd_result == CMD_RET_SUCCESS) { - printf("Command finished\n"); - lcd_clear(); - lcd_printf("\n\n\t%s finished\n", - mode_name[mode][0]); - - exit_option = exit_reset; - leave = 1; - } else { - printf("Command error\n"); - lcd_clear(); - lcd_printf("\n\n\t%s command error\n", - mode_name[mode][0]); - - exit_option = exit_back; - leave = 0; - } - } else { - lcd_puts("\n\n\tThis mode is not supported.\n"); - exit_option = exit_back; - leave = 0; - } - } - - lcd_printf("\n\n\tPress POWER KEY to %s\n", exit_option); - - /* Clear PWR button Rising edge interrupt status flag */ - power_key_pressed(KEY_PWR_INTERRUPT_REG); - - /* Wait for PWR key */ - while (!key_pressed(KEY_POWER)) - mdelay(1); - - lcd_clear(); - return leave; -#else - return 0; -#endif -} - -#ifdef CONFIG_LCD -static void display_download_menu(int mode) -{ - char *selection[BOOT_MODE_EXIT + 1]; - int i; - - for (i = 0; i <= BOOT_MODE_EXIT; i++) - selection[i] = "[ ]"; - - selection[mode] = "[=>]"; - - lcd_clear(); - lcd_printf("\n\n\t\tDownload Mode Menu\n\n"); - - for (i = 0; i <= BOOT_MODE_EXIT; i++) - lcd_printf("\t%s %s - %s\n\n", selection[i], - mode_name[i][0], mode_info[i]); -} -#endif - -static void download_menu(void) -{ -#ifdef CONFIG_LCD - int mode = 0; - int last_mode = 0; - int run; - int key = 0; - int timeout = 15; /* sec */ - int i; - - display_download_menu(mode); - - lcd_puts("\n"); - - /* Start count if no key is pressed */ - while (check_keys()) - continue; - - while (timeout--) { - lcd_printf("\r\tNormal boot will start in: %2.d seconds.", - timeout); - - /* about 1000 ms in for loop */ - for (i = 0; i < 10; i++) { - mdelay(100); - key = check_keys(); - if (key) - break; - } - if (key) - break; - } - - if (!key) { - lcd_clear(); - return; - } - - while (1) { - run = 0; - - if (mode != last_mode) - display_download_menu(mode); - - last_mode = mode; - mdelay(200); - - key = check_keys(); - switch (key) { - case KEY_POWER: - run = 1; - break; - case KEY_VOLUMEUP: - if (mode > 0) - mode--; - break; - case KEY_VOLUMEDOWN: - if (mode < BOOT_MODE_EXIT) - mode++; - break; - default: - break; - } - - if (run) { - if (mode_leave_menu(mode)) - run_command("reset", 0); - - display_download_menu(mode); - } - } - - lcd_clear(); -#endif -} - -void check_boot_mode(void) -{ - int pwr_key; - - pwr_key = power_key_pressed(KEY_PWR_STATUS_REG); - if (!pwr_key) - return; - - /* Clear PWR button Rising edge interrupt status flag */ - power_key_pressed(KEY_PWR_INTERRUPT_REG); - - if (key_pressed(KEY_VOLUMEUP)) - download_menu(); - else if (key_pressed(KEY_VOLUMEDOWN)) - mode_leave_menu(BOOT_MODE_THOR); -} - -void keys_init(void) -{ - /* Set direction to input */ - gpio_request(KEY_VOL_UP_GPIO, "volume-up"); - gpio_request(KEY_VOL_DOWN_GPIO, "volume-down"); - gpio_direction_input(KEY_VOL_UP_GPIO); - gpio_direction_input(KEY_VOL_DOWN_GPIO); -} -#endif /* CONFIG_LCD_MENU */ - #ifdef CONFIG_CMD_BMP void draw_logo(void) { diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index a2b62f5f6de..f94135355ab 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -98,9 +98,6 @@ int universal_spi_read(void); /* Common misc for Samsung */ #define CONFIG_MISC_COMMON
-/* Download menu - Samsung common */ -#define CONFIG_LCD_MENU - /* Download menu - definitions for check keys */ #ifndef __ASSEMBLY__
diff --git a/include/configs/trats.h b/include/configs/trats.h index daa8cc79b2f..9e4cd6794cc 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -128,9 +128,6 @@ /* Common misc for Samsung */ #define CONFIG_MISC_COMMON
-/* Download menu - Samsung common */ -#define CONFIG_LCD_MENU - /* Download menu - definitions for check keys */ #ifndef __ASSEMBLY__
diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 052045a6014..dc28ded9825 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -118,9 +118,6 @@ /* Common misc for Samsung */ #define CONFIG_MISC_COMMON
-/* Download menu - Samsung common */ -#define CONFIG_LCD_MENU - /* Download menu - definitions for check keys */ #ifndef __ASSEMBLY__
diff --git a/include/samsung/misc.h b/include/samsung/misc.h index 4ff28a1df0e..89546a1cbcc 100644 --- a/include/samsung/misc.h +++ b/include/samsung/misc.h @@ -9,21 +9,6 @@ u32 get_board_rev(void); void set_board_info(void); #endif
-#ifdef CONFIG_LCD_MENU -enum { - BOOT_MODE_INFO, - BOOT_MODE_THOR, - BOOT_MODE_UMS, - BOOT_MODE_DFU, - BOOT_MODE_GPT, - BOOT_MODE_ENV, - BOOT_MODE_EXIT, -}; - -void keys_init(void); -void check_boot_mode(void); -#endif /* CONFIG_LCD_MENU */ - #ifdef CONFIG_CMD_BMP void draw_logo(void); #endif diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 1284b76f61b..7dd9cbb7b2e 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -263,7 +263,6 @@ CONFIG_KSNET_SERDES_SGMII2_BASE CONFIG_KSNET_SERDES_SGMII_BASE CONFIG_L1_INIT_RAM CONFIG_L2_CACHE -CONFIG_LCD_MENU CONFIG_LD9040 CONFIG_LEGACY_BOOTCMD_ENV CONFIG_LOADS_ECHO