The symbol CONFIG_SPL_DFU_SUPPORT in SPL build has the same meaning as CONFIG_DFU in regular U-Boot. Drop the _SUPPORT to allow for cleaner use in code.
Signed-off-by: Andrew F. Davis afd@ti.com --- arch/arm/cpu/armv8/zynqmp/spl.c | 2 +- arch/arm/mach-omap2/boot-common.c | 2 +- common/Makefile | 4 ++-- common/spl/Kconfig | 6 +++--- common/spl/Makefile | 2 +- common/spl/spl_ram.c | 4 ++-- drivers/Makefile | 2 +- drivers/usb/gadget/Makefile | 2 +- include/configs/dra7xx_evm.h | 2 +- include/configs/xilinx_zynqmp.h | 4 ++-- 10 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/cpu/armv8/zynqmp/spl.c b/arch/arm/cpu/armv8/zynqmp/spl.c index 01f31d0f0e..fb3955c93f 100644 --- a/arch/arm/cpu/armv8/zynqmp/spl.c +++ b/arch/arm/cpu/armv8/zynqmp/spl.c @@ -93,7 +93,7 @@ u32 spl_boot_device(void) case EMMC_MODE: return BOOT_DEVICE_MMC1; #endif -#ifdef CONFIG_SPL_DFU_SUPPORT +#ifdef CONFIG_SPL_DFU case USB_MODE: return BOOT_DEVICE_DFU; #endif diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c index 176d4f67cb..2db19227b9 100644 --- a/arch/arm/mach-omap2/boot-common.c +++ b/arch/arm/mach-omap2/boot-common.c @@ -108,7 +108,7 @@ void save_omap_boot_params(void) sys_boot_device = 1; break; #endif -#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU_SUPPORT) +#if defined(BOOT_DEVICE_DFU) && !defined(CONFIG_SPL_DFU) case BOOT_DEVICE_DFU: sys_boot_device = 1; break; diff --git a/common/Makefile b/common/Makefile index 65d89dc62d..69cec69608 100644 --- a/common/Makefile +++ b/common/Makefile @@ -64,10 +64,10 @@ obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o
ifdef CONFIG_SPL_BUILD -ifdef CONFIG_SPL_DFU_SUPPORT +ifdef CONFIG_SPL_DFU obj-$(CONFIG_DFU_OVER_USB) += dfu.o endif -obj-$(CONFIG_SPL_DFU_SUPPORT) += cli_hush.o +obj-$(CONFIG_SPL_DFU) += cli_hush.o obj-$(CONFIG_SPL_HASH_SUPPORT) += hash.o obj-$(CONFIG_TPL_HASH_SUPPORT) += hash.o obj-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 0ddbffc7d1..8dec080deb 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -790,7 +790,7 @@ config SPL_USB_ETHER since the network stack uses a number of environment variables. See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT.
-config SPL_DFU_SUPPORT +config SPL_DFU bool "Support DFU (Device Firmware Upgrade)" select SPL_HASH_SUPPORT select SPL_DFU_NO_RESET @@ -805,11 +805,11 @@ config SPL_DFU_SUPPORT
choice bool "DFU device selection" - depends on SPL_DFU_SUPPORT + depends on SPL_DFU
config SPL_DFU_RAM bool "RAM device" - depends on SPL_DFU_SUPPORT && SPL_RAM_SUPPORT + depends on SPL_DFU && SPL_RAM_SUPPORT help select RAM/DDR memory device for loading binary images (u-boot/kernel) to the selected device partition using diff --git a/common/spl/Makefile b/common/spl/Makefile index a130a5be4b..6f8d7599ae 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -26,7 +26,7 @@ obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o -obj-$(CONFIG_$(SPL_TPL_)DFU_SUPPORT) += spl_dfu.o +obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o obj-$(CONFIG_$(SPL_TPL_)USB_SDP_SUPPORT) += spl_sdp.o diff --git a/common/spl/spl_ram.c b/common/spl/spl_ram.c index 5fcc3b1504..954e91a004 100644 --- a/common/spl/spl_ram.c +++ b/common/spl/spl_ram.c @@ -35,7 +35,7 @@ static int spl_ram_load_image(struct spl_image_info *spl_image,
header = (struct image_header *)CONFIG_SPL_LOAD_FIT_ADDRESS;
-#if CONFIG_IS_ENABLED(DFU_SUPPORT) +#if CONFIG_IS_ENABLED(DFU) if (bootdev->boot_device == BOOT_DEVICE_DFU) spl_dfu_cmd(0, "dfu_alt_info_ram", "ram", "0"); #endif @@ -76,7 +76,7 @@ static int spl_ram_load_image(struct spl_image_info *spl_image, #if CONFIG_IS_ENABLED(RAM_DEVICE) SPL_LOAD_IMAGE_METHOD("RAM", 0, BOOT_DEVICE_RAM, spl_ram_load_image); #endif -#if CONFIG_IS_ENABLED(DFU_SUPPORT) +#if CONFIG_IS_ENABLED(DFU) SPL_LOAD_IMAGE_METHOD("DFU", 0, BOOT_DEVICE_DFU, spl_ram_load_image); #endif
diff --git a/drivers/Makefile b/drivers/Makefile index 55de10926e..7fe80b1d72 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -48,7 +48,7 @@ obj-$(CONFIG_SPL_USB_ETHER) += net/phy/ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/ obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += usb/gadget/udc/ -obj-$(CONFIG_SPL_DFU_SUPPORT) += dfu/ +obj-$(CONFIG_SPL_DFU) += dfu/ obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/ obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/ diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index b74c1fdce9..b5bc59eecb 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o
ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_USB_GADGET_SUPPORT) += g_dnl.o -obj-$(CONFIG_SPL_DFU_SUPPORT) += f_dfu.o +obj-$(CONFIG_SPL_DFU) += f_dfu.o obj-$(CONFIG_SPL_USB_SDP_SUPPORT) += f_sdp.o endif
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 2d8758db75..f36a9c3e08 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -53,7 +53,7 @@
#ifdef CONFIG_SPL_BUILD #undef CONFIG_CMD_BOOTD -#ifdef CONFIG_SPL_DFU_SUPPORT +#ifdef CONFIG_SPL_DFU #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000 #define DFUARGS \ "dfu_bufsiz=0x10000\0" \ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 0ab32611ce..7a9b06ec4c 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -183,7 +183,7 @@ #endif
/* SPL can't handle all huge variables - define just DFU */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT) +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU) #undef CONFIG_EXTRA_ENV_SETTINGS # define CONFIG_EXTRA_ENV_SETTINGS \ "dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \ @@ -228,7 +228,7 @@ # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT) +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU) # undef CONFIG_CMD_BOOTD # define CONFIG_SPL_ENV_SUPPORT # define CONFIG_SPL_HASH_SUPPORT