Hello Wolfgang,
This patch adds support for the U-Boot command 'bdinfo' for SPARC boards, the output is as shown below.
###################### U-Boot 1.3.2-00273-gf85e20a (Mar 28 2008 - 13:13:48)GAISLER LEON3 GR-XC3S-1500
CPU: LEON3 Board: GRSIM/TSIM Using default environment
In: serial Out: serial Err: serial Net: GRETH 10/100
Type "run flash_nfs" to mount root filesystem over NFS
Hit any key to stop autoboot: 0 => bdinfo memstart = 0x40000000 memsize = 0x04000000 flashstart = 0x00000000 CFG_MONITOR_BASE = 0x00000000 CFG_ENV_ADDR = 0x007F8000 CFG_RELOC_MONITOR_BASE = 0x43f8e000 (262144) CFG_MALLOC_BASE = 0x43fce000 (131072) CFG_INIT_SP_OFFSET = 0x43ffdfe0 (65504) CFG_PROM_OFFSET = 0x43ffe000 (8064) CFG_GBL_DATA_OFFSET = 0x43ffff80 (128) ethaddr = 00:00:7A:CC:00:12 IP addr = 192.168.0.80 baudrate = 38400 bps => ######################
This patch is also available at ftp://ftp.gaisler.com/gaisler.com/u-boot/patches.
Best Regards, Daniel Hellstrom
Signed-off-by: Daniel Hellstrom daniel@gaisler.com --- common/cmd_bdinfo.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 files changed, 39 insertions(+), 0 deletions(-)
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index bbb0192..731c1d2 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -208,6 +208,45 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; }
+#elif defined(CONFIG_SPARC) /* SPARC */ +int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + bd_t *bd = gd->bd; +#if defined(CONFIG_CMD_NET) + int i; +#endif + +#ifdef DEBUG + print_num("bd address ", (ulong) bd); +#endif + print_num("memstart ", bd->bi_memstart); + print_num("memsize ", bd->bi_memsize); + print_num("flashstart ", bd->bi_flashstart); + print_num("CFG_MONITOR_BASE ", CFG_MONITOR_BASE); + print_num("CFG_ENV_ADDR ", CFG_ENV_ADDR); + printf("CFG_RELOC_MONITOR_BASE = 0x%lx (%d)\n", CFG_RELOC_MONITOR_BASE, + CFG_MONITOR_LEN); + printf("CFG_MALLOC_BASE = 0x%lx (%d)\n", CFG_MALLOC_BASE, + CFG_MALLOC_LEN); + printf("CFG_INIT_SP_OFFSET = 0x%lx (%d)\n", CFG_INIT_SP_OFFSET, + CFG_STACK_SIZE); + printf("CFG_PROM_OFFSET = 0x%lx (%d)\n", CFG_PROM_OFFSET, + CFG_PROM_SIZE); + printf("CFG_GBL_DATA_OFFSET = 0x%lx (%d)\n", CFG_GBL_DATA_OFFSET, + CFG_GBL_DATA_SIZE); + +#if defined(CONFIG_CMD_NET) + puts("ethaddr ="); + for (i = 0; i < 6; ++i) { + printf("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); + } + puts("\nIP addr = "); + print_IPaddr(bd->bi_ip_addr); +#endif + printf("\nbaudrate = %6ld bps\n", bd->bi_baudrate); + return 0; +} + #elif defined(CONFIG_M68K) /* M68K */ static void print_str(const char *, const char *);